Molybdenum, bis(dibutylcarbamodithioato)di-μ-oxodioxodi-, sulfurized

Skin irritation / corrosion

Administrative data

Endpoint:

skin irritation: in vitro / ex vivo

Type of information:

experimental study

Adequacy of study:

key study

Study period:

31 May 2016 to 31 August 2018

Reliability:

1 (reliable without restriction)

Rationale for reliability incl. deficiencies:

guideline study

Data source

Reference

Reference Type:

study report

Title:

Unnamed

Year:

2018

Report date:

2018

Materials and methods

Test guideline

Test guideline 1

Qualifier:

according to guideline

Guideline:

EU Method B.46 (In Vitro Skin Irritation: Reconstructed Human Epidermis Model Test)

Deviations:

no

Test guideline 2

Qualifier:

according to guideline

Guideline:

OECD Guideline 439 (In Vitro Skin Irritation: Reconstructed Human Epidermis Test Method)

Deviations:

no

GLP compliance:

yes (incl. QA statement)

Test material

Test material information

Constituent 1

Reference substance name:

Molybdenum, bis(dibutylcarbamodithioato)di-μ-oxodioxodi-, sulfurized

EC Number:

270-180-5

EC Name:

Molybdenum, bis(dibutylcarbamodithioato)di-μ-oxodioxodi-, sulfurized

Cas Number:

68412-26-0

Molecular formula:

C18H36N2Mo2O2S4X2 Where X = O or S

IUPAC Name:

Molybdenum oxide sulfide dibutyldithiocarbamate complex

Test material form:

solid: particulate/powder

Details on test material:

- Identification: Molybdenum, bis (dibutylcarbamodithioato)
- CAS Number: 68412-26-0

Specific details on test material used for the study:

CAS RN: 68412-26-0
Purity: This substance has an Unknown or Variable composition, is a Complex reaction product, or a Biological material (UVCB).
Physical state/Appearance: Yellow powder

In vitro test system

Test system:

human skin model

Source species:

human

Cell type:

other: reconstructed human epidermis tissues

Cell source:

other: not specified

Vehicle:

unchanged (no vehicle)

Details on test system:

Triplicate tissues were treated with approximately 10 mg (26.3 mg/cm^2) of the test item. Triplicate tissues treated with 10 µL of DPBS served as the negative controls and triplicate tissues treated with 10 µL of SDS 5% w/v served as the positive controls. The plates were kept in the biological safety cabinet at room temperature for 15 minutes.
At the end of the exposure period, each tissue was removed from the well using forceps and rinsed using DPBS with Ca++ and Mg++. The rinsed tissues were transferred to the second column of 3 wells containing 2 mL of maintenance medium in each well and were incubated at 37 ºC, 5% CO2 in air for 42 hours.

MTT Loading/Formazan Extraction (Day 3)
Following the 42 hour post-exposure incubation period each 12-well plate was placed onto a plate shaker for 15 minutes to homogenize the released mediators in the maintenance medium. Maintenance medium from beneath each tissue was transferred to pre labeled micro tubes and stored in a freezer at 14 to 30 ºC for possible inflammatory mediator IL-1α determination.
MTT solution, freshly prepared in assay medium, was pipetted into the third column of 3 wells of the 12-well plates. The tissues were transferred to the MTT filled wells, incubated for 3 hours at 37 °C, 5% CO2 in air, and then placed onto absorbent paper to dry. A total biopsy of the epidermis was made, the epidermis was carefully separated from the collagen matrix, and both parts (epidermis and collagen matrix) placed into labeled micro tubes containing acidified isopropanol, ensuring that both the epidermis and collagen matrix were fully immersed. Each tube was plugged to prevent evaporation, mixed thoroughly on a vortex mixer, and then were refrigerated at 1 to 10 °C until Day 6 of the experiment, allowing the extraction of formazan crystals.

Absorbance/Optical Density Measurements (Day 6)
At the end of the formazan extraction period each tube was mixed thoroughly on a vortex mixer to produce a homogenous colored solution.
For each tissue, duplicate samples were transferred to the appropriate wells of a pre labeled 96 well plate. Acidified isopropanol alone was added to the two wells designated as ‘blanks’. The optical density was measured (quantitative viability analysis) at 562 nm (without a reference filter) using the Anthos 2001 microplate reader.

Control samples:

other: Negative Control: Dulbecco’s Phosphate Buffered Saline (DPBS) with Ca++ and Mg++ and Positive Control: Sodium Dodecyl Sulphate (SDS)

Amount/concentration applied:

Approximately 10 mg (26.3 mg/cm^2)

Duration of treatment / exposure:

Triplicate tissues were treated with the test item for an exposure period of 15 minutes.

Duration of post-treatment incubation (if applicable):

At the end of the exposure period each tissue was rinsed before incubating for 42 hours.

Number of replicates:

Three.

Results and discussion

In vitro

Results

Irritation / corrosion parameter:

% tissue viability

Run / experiment:

15 minute exposure period and 42 Hours post exposure incubation period.

Value:

109.6

Vehicle controls validity:

not applicable

Negative controls validity:

valid

Positive controls validity:

valid

Remarks on result:

no indication of irritation

Any other information on results incl. tables

Direct MTT Reduction

The MTT solution containing the test item did not turn blue or purple, which indicated that the test item did not directly reduce MTT. 

 

Assessment of Color Interference with the MTT Endpoint

The solution containing the test item was a yellow color. This color was attributed to the intrinsic color of the test item itself. It was therefore unnecessary to run color correction tissues.

 

Test Item, Positive Control Item and Negative Control Item

The relative mean viability of the test item treated tissues was 109.6% after a 15-minute exposure period and 42-hour post exposure incubation period.

It was considered unnecessary to perform IL-1aanalysis as the results of the MTT test were unequivocal.

 

Quality Criteria

The relative mean tissue viability for the positive control treated tissues was 7.2% relative to the negative control treated tissues and the standard deviation value of the viability was 1.7%. The positive control acceptance criteria were therefore satisfied.

The mean OD562 for the negative control treated tissues was 0.667 and the standard deviation value of the viability was 13.1%. The negative control acceptance criteria were therefore satisfied.

The standard deviation calculated from individual tissue viabilities of the three identically test item treated tissues was 4.7%. The test item acceptance criterion was therefore satisfied.

Applicant's summary and conclusion

Interpretation of results:

other: Not classified for Irritation (category 3 cannot be determined)

Conclusions:

The test item was classified as non-irritant. The following classification criteria apply: EU CLP Not classified for Irritation and UN GHS Not classified for Irritation (category 3 cannot be determined).

Executive summary:

 The purpose of this test was to evaluate the skin irritation potential of the test item using the EPISKIN^^TMreconstructed human epidermis model after a treatment period of 15 minutes followed by a post exposure incubation period of 42 hours. The principle of the assay was based on the measurement of cytotoxicity in reconstructed human epidermal cultures following topical exposure to the test item by means of the colorimetric MTT reduction assay. Cell viability is measured by enzymatic reduction of the yellow MTT tetrazolium salt (3 [4,5-dimethylthiazol-2-yl]-2,5-diphenyl-tetrazolium bromide) to a blue formazan salt (within the mitochondria of viable cells) in the test item treated tissues relative to the negative controls. 

Triplicate tissues were treated with the test item for an exposure period of 15 minutes. At the end of the exposure period each tissue was rinsed before incubating for 42 hours. At the end of the post exposure incubation period each tissue was taken for MTT-loading. The maintenance medium from beneath each tissue was transferred to pre labeled micro tubes and stored in a freezer for possible inflammatory mediator determination. After MTT-loading a total biopsy of each epidermis was made and placed into micro tubes containing acidified isopropanol for extraction of formazan crystals out of the MTT loaded tissues. 

At the end of the formazan extraction period each tube was mixed thoroughly and duplicate 200 µL samples were transferred to the appropriate wells of a pre labeled 96 well plate. The optical density was measured at 562 nm.

Data are presented in the form of percentage viability (MTT reduction in the test item treated tissues relative to negative control tissues).

The relative mean viability of the test item treated tissues was 109.6% after the 15 minute exposure period and 42 Hours post exposure incubation period. The quality criteria required for acceptance of results in the test were satisfied. The test item was classified as non-irritant. The following classification criteria apply: EU CLP Not classified for Irritation and UN GHS Not classified for Irritation (category 3 cannot be determined).