1,1'-(4-chlorobutylidene)bis[4-fluorobenzene]

Endpoint summary

Key value for chemical safety assessment

Genetic toxicity in vitro

Description of key information

Based on the prediction done using the OECD QSAR toolbox version 3.3 with log kow as the primary descriptor and considering the five closest read across substances, gene mutation was predicted for 2- phenylethyl benzoate. The study assumed the use of Salmonella typhimurium strains TA 1535, TA 1537, TA 98, TA 100 and TA 102 with S9 metabolic activation system. 2- phenylethyl benzoate was predicted to not induce gene mutation in Salmonella typhimurium strains TA 1535, TA 1537, TA 98, TA 100 and TA 102 in the presence of S9 metabolic activation system and hence, according to the prediction made, it is not likely to classify as a gene mutant in vitro.

Based on the predicted result it can be concluded that the substance is considered to not toxic as per the criteria mentioned in CLP regulation.

Link to relevant study records

Reference

Endpoint:

in vitro gene mutation study in bacteria

Remarks:

Type of genotoxicity: gene mutation

Type of information:

(Q)SAR

Adequacy of study:

weight of evidence

Reliability:

2 (reliable with restrictions)

Rationale for reliability incl. deficiencies:

results derived from a valid (Q)SAR model and falling into its applicability domain, with limited documentation / justification

Justification for type of information:

Data is from OECD QSAR Toolbox version 3.3 and the supporting QMRF report has been attached

Qualifier:

according to guideline

Guideline:

other: Refer below principle

Principles of method if other than guideline:

Prediction is done using OECD QSAR Toolbox version 3.3, 2017

GLP compliance:

not specified

Type of assay:

bacterial reverse mutation assay

Specific details on test material used for the study:

- Name of the test material: 2-phenylethyl benzoate
- IUPAC name: 2-phenylethyl benzoate
- Molecular formula: C15H14O2
- Molecular weight: 226.274 g/mol
- Substance type: Organic
- Smiles: c1(C(OCCc2ccccc2)=O)ccccc1

Target gene:

Histidine

Species / strain / cell type:

S. typhimurium TA 1535, TA 1537, TA 98, TA 100 and TA 102

Details on mammalian cell type (if applicable):

Not applicable

Additional strain / cell type characteristics:

not specified

Cytokinesis block (if used):

No data

Metabolic activation:

with

Metabolic activation system:

S9 metabolic activation system

Test concentrations with justification for top dose:

No data

Vehicle / solvent:

No data

Untreated negative controls:

not specified

Negative solvent / vehicle controls:

not specified

True negative controls:

not specified

Positive controls:

not specified

Positive control substance:

not specified

Details on test system and experimental conditions:

No data

Rationale for test conditions:

No data

Evaluation criteria:

Prediction is done considering a dose dependent increase in the number of revertants/plate

Statistics:

No data

Species / strain:

S. typhimurium, other: TA 1535, TA 1537, TA 98, TA 100 and TA 102

Metabolic activation:

with

Genotoxicity:

negative

Cytotoxicity / choice of top concentrations:

not specified

Vehicle controls validity:

not specified

Untreated negative controls validity:

not specified

Positive controls validity:

not specified

Additional information on results:

No data

The prediction was based on dataset comprised from the following descriptors: "Gene mutation"
Estimation method: Takes highest mode value from the 6 nearest neighbours
Domain  logical expression:Result: In Domain

(((("a" and ("b" and ( not "c") )  )  and "d" )  and ("e" and ( not "f") )  )  and ("g" and "h" )  )

Domain logical expression index: "a"

Referential boundary: The target chemical should be classified as Alkyl chloride OR Alkyl halide OR Aromatic compound OR Aryl fluoride OR Aryl halide OR Halogen derivative by Organic functional groups, Norbert Haider (checkmol) ONLY

Domain logical expression index: "b"

Referential boundary: The target chemical should be classified as No alert found by DNA binding by OASIS v.1.3

Domain logical expression index: "c"

Referential boundary: The target chemical should be classified as AN2 OR AN2 >>  Michael-type addition, quinoid structures OR AN2 >>  Michael-type addition, quinoid structures >> Quinoneimines OR AN2 >>  Michael-type addition, quinoid structures >> Quinones OR AN2 >> Carbamoylation after isocyanate formation OR AN2 >> Carbamoylation after isocyanate formation >> N-Hydroxylamines OR AN2 >> Nucleophilic addition to alpha, beta-unsaturated carbonyl compounds OR AN2 >> Nucleophilic addition to alpha, beta-unsaturated carbonyl compounds >> alpha, beta-Unsaturated Aldehydes OR AN2 >> Schiff base formation OR AN2 >> Schiff base formation >> alpha, beta-Unsaturated Aldehydes OR AN2 >> Schiff base formation >> Polarized Haloalkene Derivatives OR AN2 >> Schiff base formation by aldehyde formed after metabolic activation OR AN2 >> Schiff base formation by aldehyde formed after metabolic activation >> Geminal Polyhaloalkane Derivatives OR AN2 >> Shiff base formation for aldehydes OR AN2 >> Shiff base formation for aldehydes >> Geminal Polyhaloalkane Derivatives OR AN2 >> Shiff base formation for aldehydes >> Haloalkane Derivatives with Labile Halogen OR AN2 >> Thioacylation via nucleophilic addition after cysteine-mediated thioketene formation OR AN2 >> Thioacylation via nucleophilic addition after cysteine-mediated thioketene formation >> Haloalkenes with Electron-Withdrawing Groups OR AN2 >> Thioacylation via nucleophilic addition after cysteine-mediated thioketene formation >> Polarized Haloalkene Derivatives OR Michael addition OR Michael addition >> Quinone type compounds OR Michael addition >> Quinone type compounds >> Quinone methides OR Non-covalent interaction OR Non-covalent interaction >> DNA intercalation OR Non-covalent interaction >> DNA intercalation >> Acridone, Thioxanthone, Xanthone and Phenazine Derivatives OR Non-covalent interaction >> DNA intercalation >> Aminoacridine DNA Intercalators OR Non-covalent interaction >> DNA intercalation >> Fused-Ring Primary Aromatic Amines OR Non-covalent interaction >> DNA intercalation >> Quinones OR Non-specific OR Non-specific >> Incorporation into DNA/RNA, due to structural analogy with  nucleoside bases    OR Non-specific >> Incorporation into DNA/RNA, due to structural analogy with  nucleoside bases    >> Specific Imine and Thione Derivatives OR Radical OR Radical >> Generation of ROS by glutathione depletion (indirect) OR Radical >> Generation of ROS by glutathione depletion (indirect) >> Haloalkanes Containing Heteroatom OR Radical >> Radical mechanism by ROS formation OR Radical >> Radical mechanism by ROS formation >> Acridone, Thioxanthone, Xanthone and Phenazine Derivatives OR Radical >> Radical mechanism via ROS formation (indirect) OR Radical >> Radical mechanism via ROS formation (indirect) >> Conjugated Nitro Compounds OR Radical >> Radical mechanism via ROS formation (indirect) >> Fused-Ring Primary Aromatic Amines OR Radical >> Radical mechanism via ROS formation (indirect) >> Geminal Polyhaloalkane Derivatives OR Radical >> Radical mechanism via ROS formation (indirect) >> Hydrazine Derivatives OR Radical >> Radical mechanism via ROS formation (indirect) >> N-Hydroxylamines OR Radical >> Radical mechanism via ROS formation (indirect) >> Quinones OR Radical >> Radical mechanism via ROS formation (indirect) >> Specific Imine and Thione Derivatives OR Radical >> ROS formation after GSH depletion OR Radical >> ROS formation after GSH depletion (indirect) OR Radical >> ROS formation after GSH depletion (indirect) >> Quinoneimines OR Radical >> ROS formation after GSH depletion >> Quinone methides OR SN1 OR SN1 >> Alkylation after metabolically formed carbenium ion species OR SN1 >> Alkylation after metabolically formed carbenium ion species >> Polycyclic Aromatic Hydrocarbon Derivatives OR SN1 >> Nucleophilic attack after carbenium ion formation OR SN1 >> Nucleophilic attack after carbenium ion formation >> Acyclic Triazenes OR SN1 >> Nucleophilic attack after carbenium ion formation >> N-Nitroso Compounds OR SN1 >> Nucleophilic attack after metabolic nitrenium ion formation OR SN1 >> Nucleophilic attack after metabolic nitrenium ion formation >> Fused-Ring Primary Aromatic Amines OR SN1 >> Nucleophilic attack after metabolic nitrenium ion formation >> N-Hydroxylamines OR SN1 >> Nucleophilic attack after nitrenium and/or carbenium ion formation OR SN1 >> Nucleophilic attack after nitrenium and/or carbenium ion formation >> N-Nitroso Compounds OR SN1 >> Nucleophilic attack after reduction and nitrenium ion formation OR SN1 >> Nucleophilic attack after reduction and nitrenium ion formation >> Conjugated Nitro Compounds OR SN1 >> Nucleophilic attack after reduction and nitrenium ion formation >> Nitrobiphenyls and Bridged Nitrobiphenyls OR SN1 >> Nucleophilic substitution on diazonium ions OR SN1 >> Nucleophilic substitution on diazonium ions >> Specific Imine and Thione Derivatives OR SN2 OR SN2 >> Acylation involving a leaving group  OR SN2 >> Acylation involving a leaving group  >> Geminal Polyhaloalkane Derivatives OR SN2 >> Acylation involving a leaving group  >> Haloalkane Derivatives with Labile Halogen OR SN2 >> Acylation involving a leaving group after metabolic activation OR SN2 >> Acylation involving a leaving group after metabolic activation >> Geminal Polyhaloalkane Derivatives OR SN2 >> Alkylation by epoxide metabolically formed after E2 reaction OR SN2 >> Alkylation by epoxide metabolically formed after E2 reaction >> Monohaloalkanes OR SN2 >> Alkylation, direct acting epoxides and related OR SN2 >> Alkylation, direct acting epoxides and related >> Epoxides and Aziridines OR SN2 >> Alkylation, direct acting epoxides and related after cyclization OR SN2 >> Alkylation, direct acting epoxides and related after cyclization >> Nitrogen Mustards OR SN2 >> Alkylation, direct acting epoxides and related after P450-mediated metabolic activation OR SN2 >> Alkylation, direct acting epoxides and related after P450-mediated metabolic activation >> Haloalkenes with Electron-Withdrawing Groups OR SN2 >> Alkylation, direct acting epoxides and related after P450-mediated metabolic activation >> Polycyclic Aromatic Hydrocarbon Derivatives OR SN2 >> Alkylation, nucleophilic substitution at sp3-carbon atom OR SN2 >> Alkylation, nucleophilic substitution at sp3-carbon atom >> Haloalkane Derivatives with Labile Halogen OR SN2 >> Alkylation, nucleophilic substitution at sp3-carbon atom >> Monohaloalkanes OR SN2 >> Direct acting epoxides formed after metabolic activation OR SN2 >> Direct acting epoxides formed after metabolic activation >> Quinoline Derivatives OR SN2 >> DNA alkylation OR SN2 >> DNA alkylation >> Vicinal Dihaloalkanes OR SN2 >> Internal SN2 reaction with aziridinium and/or cyclic sulfonium ion formation (enzymatic) OR SN2 >> Internal SN2 reaction with aziridinium and/or cyclic sulfonium ion formation (enzymatic) >> Vicinal Dihaloalkanes OR SN2 >> Nucleophilic substitution after carbenium ion formation OR SN2 >> Nucleophilic substitution after carbenium ion formation >> Monohaloalkanes OR SN2 >> Nucleophilic substitution at sp3 Carbon atom OR SN2 >> Nucleophilic substitution at sp3 Carbon atom >> Haloalkanes Containing Heteroatom OR SN2 >> Nucleophilic substitution at sp3 carbon atom after thiol (glutathione) conjugation OR SN2 >> Nucleophilic substitution at sp3 carbon atom after thiol (glutathione) conjugation >> Geminal Polyhaloalkane Derivatives OR SN2 >> SN2 at an activated carbon atom OR SN2 >> SN2 at an activated carbon atom >> Quinoline Derivatives OR SN2 >> SN2 at sp3 and activated sp2 carbon atom OR SN2 >> SN2 at sp3 and activated sp2 carbon atom >> Polarized Haloalkene Derivatives by DNA binding by OASIS v.1.3

Domain logical expression index: "d"

Referential boundary: The target chemical should be classified as SN2 AND SN2 >> SN2 at an sp3 Carbon atom AND SN2 >> SN2 at an sp3 Carbon atom >> Aliphatic halides by DNA binding by OECD ONLY

Domain logical expression index: "e"

Referential boundary: The target chemical should be classified as Not possible to classify according to these rules by DPRA Lysine peptide depletion

Domain logical expression index: "f"

Referential boundary: The target chemical should be classified as Low reactive OR Low reactive >> Benzyl halides by DPRA Lysine peptide depletion

Domain logical expression index: "g"

Parametric boundary:The target chemical should have a value of log Kow which is >= 2.32

Domain logical expression index: "h"

Parametric boundary:The target chemical should have a value of log Kow which is <= 6.49

Conclusions:

2- phenylethyl benzoate was predicted to not induce gene mutation in Salmonella typhimurium strains TA 1535, TA 1537, TA 98, TA 100 and TA 102 in the presence of S9 metabolic activation system and hence, according to the prediction made, it is not likely to classify as a gene mutant in vitro.

Executive summary:

Based on the prediction done using the OECD QSAR toolbox version 3.3 with log kow as the primary descriptor and considering the five closest read across substances, gene mutation was predicted for 2- phenylethyl benzoate. The study assumed the use of Salmonella typhimurium strains TA 1535, TA 1537, TA 98, TA 100 and TA 102 with S9 metabolic activation system. 2- phenylethyl benzoate was predicted to not induce gene mutation in Salmonella typhimurium strains TA 1535, TA 1537, TA 98, TA 100 and TA 102 in the presence of S9 metabolic activation system and hence, according to the prediction made, it is not likely to classify as a gene mutant in vitro.

Based on the predicted result it can be concluded that the substance is considered to not toxic as per the criteria mentioned in CLP regulation.

Endpoint conclusion

Endpoint conclusion:

no adverse effect observed (negative)

Genetic toxicity in vivo

Endpoint conclusion

Endpoint conclusion:

no study available

Additional information

Gene mutation in vitro:

Prediction model based estimation and data from read across chemical have been reviewed to determine the mutagenic nature of 1,1'-(4-Chlorobutylidene)bis(4-fluorobenzene) . The studies are as mentioned below:

Based on the prediction done using the OECD QSAR toolbox version 3.3 with log kow as the primary descriptor and considering the five closest read across substances, gene mutation was predicted for 2- phenylethyl benzoate. The study assumed the use of Salmonella typhimurium strains TA 1535, TA 1537, TA 98, TA 100 and TA 102 with and without S9 metabolic activation system. 2- phenylethyl benzoate was predicted to not induce gene mutation in Salmonella typhimurium strains TA 1535, TA 1537, TA 98, TA 100 and TA 102 in the presence and absence of S9 metabolic activation system and hence, according to the prediction made, it is not likely to classify as a gene mutant in vitro.

Gene mutation toxicity was predicted for 1,1'-(4-Chlorobutylidene)bis(4-fluorobenzene) using the battery approach from Danish QSAR database (2017). The study assumed the use of Salmonella typhimurium bacteria in the Ames test. The end point for gene mutation has been modeled in the Danish QSAR using the three software systems Leadscope, CASE Ultra and SciQSAR. Based on predictions from these three systems, a fourth and overall battery prediction is made. The battery prediction is made using the so called Battery algorithm. With the battery approach it is in many cases possible to reduce “noise” from the individual model estimates and thereby improve accuracy and/or broaden the applicability domain. Gene mutation toxicity study as predicted by Danish QSAR for 1,1'-(4-Chlorobutylidene)bis(4-fluorobenzene) is negative and hence the chemical is predicted to not classify as a gene mutant in vitro.

In a study for structurally and functionally similar read across chemical, gene mutation toxicity study was performed by Zeiger et al (Environmental and Molecular Mutagenesis, 1992) to determine the mutagenic nature of lauryl chloride (RA CAS no 112 -52 -7; IUPAC name: 1 -chlorododecane). The study was performed usingSalmonella typhimurium strainsTA97, TA98, TA100, TA1535 and TA1537 in the presence and absence of S9 metabolic activation system. The chemical was dissolved in DMSO as solvent and used at dose levels 0, 100, 333, 1000, 3333 or 10000 µg/plate by the preincubation method. The doses were selected on the basis of preliminary dose range finding study and concurrent solvent and positive controls were included in the study. Lauryl chloride did not induce mutation in Salmonella typhimurium TA97, TA98, TA100, TA1535 and TA1537 in the presence and absence of S9 metabolic activation system and hence is not likely to classify as a gene mutant in vitro.

Tornero- Velez et al (Drug Matabolism and Disposition, 2004) performed gene mutation toxicity study to determine the mutagenic nature of 1,3- dichloropropane (RA CAS no 142 -28 -9; IUPAC name: 1, 3- dichloropropane). The study was performed using Salmonella typhimurium strainsTA98, TA100, TA104 TA1535, RSJ100, GSST1 in the presence and absence of S9 metabolic activation system. The chemical was dissolved in DMSO as solvent and used at dose levels 0.00, 0.01, 0.05, 0.10, 0.50, 1.00, 2.00 mg/plate. Concurrent solvent and positive controls were included in the study. 1, 3 Dichloropropane did not induce mutation in Salmonella typhimurium TA98, TA100, TA104 TA1535, RSJ100, GSST1 in the presence and absence of S9 metabolic activation system and hence is not likely to classify as a gene mutant in vitro.

Based on the data available for the target chemical and its read across, 1,1'-(4-Chlorobutylidene)bis(4-fluorobenzene) does not exhibit gene mutation in vitro. Hence the test chemical is not likely to classify as a gene mutant in vitro.

Justification for classification or non-classification

Based on the data available for the target chemical and its read across, 1,1'-(4-Chlorobutylidene)bis(4-fluorobenzene) (CAS no 3312 -04 -7) does not exhibit gene mutation in vitro. Hence the test chemical is not likely to classify as a gene mutant in vitro.