Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

Emergency measure - Inhalation: Remove promptly to fresh air.  If not breathing, administer

artificial respiration.  Administer oxygen if breathing is


Emergency measure - Eyes: Flush immediately with copious amounts of water or saline,

including under eyelids.

Emergency measure - Skin: Wash affected area with soap and water. Remove contaminated

clothing. Seek medical attention if reaction occurs/persists


Emergency measure - Ingestion: Do not induce vomiting.  Seek medical advice if adverse

reaction occurs and persists.

Fire-fighting measures

Recommended extinguishing agent: Water spray, dry powder, carbon-dioxide, foam.

Product arising from burning: None known, but may produce toxic fumes including oxides of

carbon, nitrogen and sulphur.

Product determined by test: N

Protective equipment: Full protection by suitable clothing and positive pressure,

self-contained breathing apparatus.

Accidental release measures

Emergency measures in case of spillage: In the case of a large spill; A self-contained breathing

apparatus should be used to avoid inhalation of the product.

Suitable protective clothing and chemical resistent gloves

are required.

In the case of a smaller spill: PPE as described in section

2.3.00 is required.

Environmental precautions during spill recovery and clean-

up: Avoid contamination of surface waters. Vacuum or sweep

up material and place into a suitable container.

Handling and storage

Handling: The substance should be used only in well ventilated work

areas. Dusts of this product should not be breathed in.

Engineering methods to prevent or control exposure below the

permissable exposure limits should be used. Use process

enclosure (eg. glove-box units), local exhaust ventilation

or other suitable engineering controls to control airborne


The following PPE should be worn:

Respiratory protection: Wear a suitable respirator designed

for achieving a high level of filtration to dust such as

powered respirators or full-face masks with a P3 filter (EN

12941, EN 12942 & EN 166/EN 136, EN 141, EN 143 & EN 166).

Hand protection: Impereable gloves (eg. nitrile gloves to EN


Eye protection: If respirator does not already provide eye

protection, wear safety glasses or goggles conforming to EN


Body protection: Wear Tyvek or similar overalls (eg. to PREN

13982-1-2, PREN 13034) If contaminated, must be removed

whilst wearing a respirator and disposed of in an

appropriate manner.

Storage: Cool (< 10 degrees C, where possible) protected from light.

Packaging of the substance and or preparation: The substance will be packaged into double anti-static

polyethylene bag-lined 30 Litre HDPE drums.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

Shippingopen allclose all
Special provisions / remarks
Transport code: None known.
Transport: Should be transported in sealed containers, secured against
the risk of falling or other damage.
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: None known.

Chemical reaction with water: None known.

Dust explosion: Not known.

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: R-Amine, from reactors or waste/effluent stream, can be

recovered (by neutralisation, crystallisation and

filtration) and re-used.

Industry - Possibility of neutralisation: No methods known.

Industry - Possibility of destruction: controlled discharge: All process waste directed to an on-site incinerator. Only

floor washings will go to waste water treatment plant.  No

discharge to surface waters.

Industry - Possibility of destruction - incineration: All primary process waste is incinerated.

Public at large - Possibility of recovery/recycling: N/A

Public at large - Possibility of neutralisation: N/A

Public at large - Possibility of destruction: controlled discharge: N/A

Public at large - Possibility of destruction - incineration: N/A

Public at large - Possibility of destruction - water purification: N/A

Public at large - Possibility of destruction - others: N/A