Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 205-277-3 | CAS number: 137-07-5
Flash point
Administrative data
Link to relevant study record(s)
- Endpoint:
- flash point, other
- Type of information:
- experimental study
- Adequacy of study:
- supporting study
- Study period:
- 2018
- Reliability:
- 1 (reliable without restriction)
- Qualifier:
- equivalent or similar to guideline
- Guideline:
- other: ASTM D 6450-12e1 Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester
- Principles of method if other than guideline:
- The flash point (closed-cup) can be determined according to ASTM D6450-12e1 by a auto-tester. The sample is loaded into the sample cup of the tester and then is heated by a constant rate. The electric arc ignitions are applied periodically in the test chamber, then the flash point can be determined based on the pressure rise in the chamber resulted from the flash occurring.
- GLP compliance:
- no
- Type of method:
- closed cup
- Flash point apparatus:
- other: Closed-cup Flash Point Tester: MINIFLASH FLP
- Flash point:
- ca. 112 °C
- Atm. press.:
- ca. 101.325 kPa
- Conclusions:
- Flash Point (closed-up) is 112°C
Reference
The expected flash point: 113℃, Set-up of temperatures was as followings:
- The initial ignition temperature ti: 100℃;
- The final ignition temperature tf: 130℃
Determination results of the flash point:
No. Result
1 112.1 ℃
2 111.9℃
Average value112.0 ℃≈ 11 2℃
The average value of testing results, 112℃, can be considered valid based on:
- The expected value was 113℃, determination results were 112.1℃ and 111.9℃, the deviation was less than 10℃;
- The deviation between two independent test results was not more than 2℃.
Description of key information
Key value for chemical safety assessment
- Flash point at 101 325 Pa:
- 112 °C
Additional information
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
