Registration Dossier
Registration Dossier
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 451-680-4 | CAS number: -
Guidance on Safe Use
Guidance on Safe Use
Administrative data
First-aid measures
If inhaled: if breathed in, move person into fresh air. Artificial respiration and/or oxygen may be necessary. Take victim immediately to hospital.
In case of skin contact: take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. Call a physician immediately. Wash contaminated clothing before re-use.
In case of eye contact: rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Remove contact lenses. Consult a physician.
If swallowed: rinse mouth with water. Call a physician immediately.
In case of skin contact: take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. Call a physician immediately. Wash contaminated clothing before re-use.
In case of eye contact: rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Remove contact lenses. Consult a physician.
If swallowed: rinse mouth with water. Call a physician immediately.
Fire-fighting measures
Suitable extinguishing media: water mist, dry powder, foam, carbon dioxide, sand, aqueous film forming foam.
Unsuitable extinguishing media: water spray jet
Hazardous combustion products: nitrogen oxides, carbon oxides, chlorine compounds
Special protective equipment for firefighters: in the event of fire, wear self-contained breathing apparatus.
Specific extinguishing methods: in the event of fire, cool tanks with water spray.
Unsuitable extinguishing media: water spray jet
Hazardous combustion products: nitrogen oxides, carbon oxides, chlorine compounds
Special protective equipment for firefighters: in the event of fire, wear self-contained breathing apparatus.
Specific extinguishing methods: in the event of fire, cool tanks with water spray.
Accidental release measures
Personal precautions: evacuate personnel to safe areas. Use personal protective equipment. Disposable one-piece overall with integral hood. Self-contained breathing apparatus (EN 133)
Avoid dust formation. Evacuate personnel to safe areas.
Environmental precautions: should not be released into the environment.
Methods for cleaning up: shovel into suitable container for disposal. Pick up and arrange disposal without creating dust. Pick up and transfer to properly labelled containers. Prevent product from entering drains.
Avoid dust formation. Evacuate personnel to safe areas.
Environmental precautions: should not be released into the environment.
Methods for cleaning up: shovel into suitable container for disposal. Pick up and arrange disposal without creating dust. Pick up and transfer to properly labelled containers. Prevent product from entering drains.
Handling and storage
Advice on safe handling: ensure all equipment is electrically grounded before beginning transfer operations.
Advice on protection against fire and explosion: avoid dust formation.
Hygiene measures: handle in accordance with good industrial hygiene and safety practice.
Recommended storage temperature: 15 - 25 °C
Advice on protection against fire and explosion: avoid dust formation.
Hygiene measures: handle in accordance with good industrial hygiene and safety practice.
Recommended storage temperature: 15 - 25 °C
Transport information
Land transport (UN RTDG/ADR/RID)
- UN number:
- Not regulated as a dangerous good
Shippingopen allclose all
SpecialProvisionsopen allclose all
Inland waterway transport (UN RTDG/ADN(R))
- UN number:
- Not regulated as a dangerous good
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
- UN number:
- Not regulated as a dangerous good
Shippingopen allclose all
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
- UN number:
- Not regulated as a dangerous good
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Engineering measures:
Engineering controls should be used as the primary means to control possible exposures. Use process enclosures, local exhaust ventilation or other engineering controls to keep exposure levels below recommended exposure limits. All personal protective equipment should be based on a risk assessment. Consult a Environment Health Safety expert if necessary.
Personal protective equipment:
- Eye protection: tightly fitting safety goggles.
- Hand protection: take note of the information given by the producer concerning permeability and break through times, and of special workplace conditions (mechanical strain, duration of contact). Impervious gloves, nitrile rubber.
- Skin and body protection: closed work clothing. Disposable one-piece overall.
- Respiratory protection: engineering controls should always be the primary method of controlling exposures. If respiratory protective equipment is needed for certain activities, the type as well as the corresponding protection factor will depend upon the risk assessment and air concentrations, hazards, physical and warning properties of substances present. Use only respiratory protection that conforms to international/ national standards. Suitable mask with particle filter P3.
- Protective measures: the type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.
Engineering controls should be used as the primary means to control possible exposures. Use process enclosures, local exhaust ventilation or other engineering controls to keep exposure levels below recommended exposure limits. All personal protective equipment should be based on a risk assessment. Consult a Environment Health Safety expert if necessary.
Personal protective equipment:
- Eye protection: tightly fitting safety goggles.
- Hand protection: take note of the information given by the producer concerning permeability and break through times, and of special workplace conditions (mechanical strain, duration of contact). Impervious gloves, nitrile rubber.
- Skin and body protection: closed work clothing. Disposable one-piece overall.
- Respiratory protection: engineering controls should always be the primary method of controlling exposures. If respiratory protective equipment is needed for certain activities, the type as well as the corresponding protection factor will depend upon the risk assessment and air concentrations, hazards, physical and warning properties of substances present. Use only respiratory protection that conforms to international/ national standards. Suitable mask with particle filter P3.
- Protective measures: the type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.
Stability and reactivity
Reactivity: none reasonably foreseeable.
Chemical stability: stable under recommended storage conditions.
Hazardous reactions: strong oxidizing agents.
Conditions to avoid: avoid dust formation.
Hazardous decomposition products: carbon oxides, nitrogen oxides, hydrogenchloride
Chemical stability: stable under recommended storage conditions.
Hazardous reactions: strong oxidizing agents.
Conditions to avoid: avoid dust formation.
Hazardous decomposition products: carbon oxides, nitrogen oxides, hydrogenchloride
Disposal considerations
Waste treatment methods: in accordance with local and national regulations.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
