Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Physical & Chemical properties

Partition coefficient

Currently viewing:

Administrative data

Link to relevant study record(s)

Reference
Endpoint:
partition coefficient
Type of information:
experimental study
Adequacy of study:
key study
Study period:
2009
Reliability:
2 (reliable with restrictions)
Rationale for reliability incl. deficiencies:
comparable to guideline study with acceptable restrictions
Qualifier:
equivalent or similar to guideline
Guideline:
other: ETAD guideline ETAD-229
Deviations:
no
Principles of method if other than guideline:
A defined amount of the pigment was transferred to a 100 mL flask with glass stopper and 60 mL of water (deionised, 18.2 MOcm). This was stirred at 70°C for 2 hours and then 72 hours in an air conditioned laboratory (T = 23°C).
The suspension was then centrifuged (10000 rpm, 10 minutes) and filtered once through a standard paper filter, twice through a 0.2 micrometer membrane filter (Millipore) and twice through a 0.025 micrometer filter (Millipore) until a perfectly clear solution was achieved. This procedure was conducted in parallel for a total of 2 water samples and of 2 n-octanol samples.
GLP compliance:
no
Type of method:
estimation method (solubility ratio)
Partition coefficient type:
octanol-water
Specific details on test material used for the study:
- Substance type: Organic
- Physical state: Solid (powder)
- Lot/batch No.: HW-08-012
- Expiration date of the lot/batch: January 01, 2017
- Name of test material (as cited in study report): PIGMENT RED 52:2, TKP 50134
- Analytical purity: not available
Analytical method:
other: UV/Vis
Key result
Type:
log Pow
Partition coefficient:
-0.3
Temp.:
23 °C
Remarks on result:
other: pH not determined
Details on results:
Average concentrations in water: 17.4 mg/L
Average concentration in n-octanol: 8.7 mg/L
Conclusions:
The partition coefficient of test substance was estimated to be log Pow = -0.30 at 23°C

Description of key information

Estimated based on solubility ratio:

log Pow = -0.30 at 23°C

Key value for chemical safety assessment

Log Kow (Log Pow):
-0.3
at the temperature of:
23 °C

Additional information

The partition coefficient was estimated based on the ratio of the solubilities in n-octanol and in water.

The individual solubilities were determined by flask method based on OECD Guideline 105 and the ETAD method. The quantification was analyzed by UV/Vis absorption.