Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 479-930-8 | CAS number: 613222-52-9
Vapour pressure
Administrative data
Link to relevant study record(s)
- Endpoint:
- vapour pressure
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- from 2015-10-13 to 2015-11-04
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 104 (Vapour Pressure Curve)
- Version / remarks:
- 23 March 2006
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.4 (Vapour Pressure)
- Version / remarks:
- 24 August 2009
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- EPA OPPTS 830.7950 (Vapor Pressure)
- Version / remarks:
- August 1996
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
- Type of method:
- effusion method: Knudsen cell
- Key result
- Temp.:
- 20 °C
- Vapour pressure:
- 0.001 Pa
- Key result
- Temp.:
- 25 °C
- Vapour pressure:
- 0.001 Pa
- Conclusions:
- The estimated vapour pressure of the test item at 20 °C is 8.51E-4 Pa and at 25 °C is 1.27E-3 Pa, respectively.
- Executive summary:
The vapour pressure of test item has been determined according to the effusion method described in OECD Guideline n. 104 and EU Regulation No 761/2009, Method A.4. The method is based on the estimation of the mass of test item flowing out per unit of time of a Knudsen cell in the form of vapour, through a micro-orifice under ultra-vacuum conditions. The mass of effused vapour was obtained by determining the loss of mass of the cell. The vapour pressure was calculated by applying the Hertz-Knudsen relation. The vapour pressure of the test item was determined at four different temperatures (30, 45, 60 and 75 °C). The vapour pressures at 20 and 25 °C were calculated from the linear regression equation to be 8.51E-4 and 1.27E-3 Pa, respectively.
Reference
The vapour pressure of the test item SIKA Hardener LH was determined at four different temperatures (30, 45, 60 and 75 °C) following EU A.4 using the effusion method (weight loss). Experiment 4 (temperature 75 °C) showed clear signs of decomposition and to avoid bias, these measurements were not used for calculations.
Three experiments could be evaluated as they showed relevant and reproducible weight loss. All evaluated experiments showed good to medium reproducibility, giving a good correlation.
The following vapour pressures were determined experimentally and considered as valid (mean and standard deviation given):
Table 2. Experimentally Determined Vapour Pressures
T | T | P | Stand. Dev. P | RSD P |
°C | K | Pa | Pa | % |
30.0 | 303.2 | 1.84E-03 | 2.93E-04 | 15.9% |
45.0 | 318.2 | 5.72E-03 | 4.08E-04 | 7.1% |
60.0 | 333.2 | 1.46E-02 | 4.58E-03 | 31.4% |
Stand. Dev. = Standard Deviation; RSD = Relative Standard Deviation
The linear regression of log P vs. 1/T gave a correlation coefficient r of - 0.9996, showing good repeatability and precision. Therefore, the determination is considered as valid. For the test item, the following vapour pressures at 20 °C and at 25 °C were calculated from the regression equation:
Vapour pressure at 20 °C: | 8.51*10-04 Pa |
Vapour pressure at 25 °C: | 1.27*10-03 Pa |
Description of key information
The estimated vapour pressure of the test item at 20 °C is 8.51E-4 Pa and at 25 °C is 1.27E-3 Pa, respectively.
Key value for chemical safety assessment
- Vapour pressure:
- 0.001 Pa
- at the temperature of:
- 20 °C
Additional information
The vapour pressure of test item has been determined according to the effusion method described in OECD Guideline n. 104 and EU Regulation No 761/2009, Method A.4. The method is based on the estimation of the mass of test item flowing out per unit of time of a Knudsen cell in the form of vapour, through a micro-orifice under ultra-vacuum conditions. The mass of effused vapour was obtained by determining the loss of mass of the cell. The vapour pressure was calculated by applying the Hertz-Knudsen relation. The vapour pressure of the test item was determined at four different temperatures (30, 45, 60 and 75 °C). The estimated vapour pressure of the test item at 20 °C is 8.51E-4 Pa and at 25 °C is 1.27E-3 Pa, respectively.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
