legislation-obligation

Substance Regulatory Obligations

OBL

Particulates

EC number: -

CAS number: -

Last updated: 25/05/2022
ECHA Legislation Regulatory Obligations

Regulatory obligations may exist for this substance under the legislations under ECHA’s remit or for which ECHA has delegated tasks (i.e. REACH, CLP, BPR, PIC, CAD / CMD, WFD, and POPs). Please check the substance Infocard.

Ambient Air Quality Directive

Annexes II VII XI XII XIII XIV - Assessment Thresholds & Limit Values

This list contains the Limit, Critical, Target and Long-term Values on ambient air for protection of human health and vegetation. It also contains the Alert, Information and Upper and Lower Assessment thresholds for sulphur dioxide, nitrogen dioxide, benzene, carbon monoxide, lead, PM2.5, PM10 and ozone.

Name CAS Critical Level Alert Threshold Upper assessment threshold Lower assessment threshold Average limit Average sampling duration Tolerance margin Exposure conc. Obligation Information Threshold Long-term objective Objective Target value Annex Qualifier Notes  
Particulate mattter
35 µg/m3
25 µg/m3
50 µg/m3
1 d
50 %
Protection of Human Health
XI (Section B),II (Section A3)
Passes through a size-selective inlet as defined in the reference method for the sampling and measurement of PM 10, EN 12341, with a 50 % efficiency cut- off at 10 µm aerodynamic diameter.
01 Without prejudice to Annex I, the criteria for 'Required proportion of valid data' shall be used for checking validity when aggregating data and calculating statistical parameters
07 Already in force since 1 January 2005
12 Limit value not to be exceeded more than 35 times a calendar year
14 The required proportion of valid data for the Limit Value referes to the percentage of the hourly averages
30 Average Limit is the Limit Value, a level fixed with the aim of avoiding, preventing or reducing harmful effects on human health and/or the environment and not to be exceeded once attained
Details
Particulate mattter
28 µg/m3
20 µg/m3
40 µg/m3
1 yr
20 %
Protection of Human Health
XI (Section B),II (Section A3)
Passes through a size-selective inlet as defined in the reference method for the sampling and measurement of PM 10, EN 12341, with a 50 % efficiency cut- off at 10 µm aerodynamic diameter.
01 Without prejudice to Annex I, the criteria for 'Required proportion of valid data' shall be used for checking validity when aggregating data and calculating statistical parameters
07 Already in force since 1 January 2005
09 'Year' in Averaging period referes to 'calendar year'
22 The required proportion of valid data for the Limit Value refers to the one hour values or (if not available) 24-hour values over the year
15 The requirements for the calculation of annual mean do not include losses of data due to the regular calibration or the normal maintenance of the instrumentation
30 Average Limit is the Limit Value, a level fixed with the aim of avoiding, preventing or reducing harmful effects on human health and/or the environment and not to be exceeded once attained
Details
Particulate mattter
17 µg/m3
12 µg/m3
25 µg/m3
1 yr
20 %
20 µg/m3
Protection of Human Health
25 µg/m3
XIV (Section C),XIV (Section D), XIV (Section E),II (Section A3)
Passes through a size-selective inlet as defined in the reference method for the sampling and measurement of PM 2,5, EN 14907, with a 50 % efficiency cut- off at 2,5 µm aerodynamic diameter.
01 Without prejudice to Annex I, the criteria for 'Required proportion of valid data' shall be used for checking validity when aggregating data and calculating statistical parameters
08 Date by which limit value is to be met: 1 January 2010
25 Stage 2 sets up the limit value to 20 ug/m3 with 1 January 2020 as the date by which the limit value is to be met. The indicative limit value for Stage 2 to be reviewed by the Commission in 2013 in the light of further information on health and environmental effects, technical feasibility and experience of the target value in Member States
26 Year by which limit exposure concentration obligation is to be met: 2015
30 Average Limit is the Limit Value, a level fixed with the aim of avoiding, preventing or reducing harmful effects on human health and/or the environment and not to be exceeded once attained
Details
Industrial Emissions Directive

IPPC - Industrial Emissions Directive, Annex II - Polluting Substances

This list contains the polluting substances for which emission limit values are assigned under Directive 2010/75/EU on Industrial Emissions (Integrated Pollution Prevention and Control - IPPC). Member States must permit all qualifying facilities in order to ensure that they minimize impact on the environment. The permit issued must provide emission limit values for pollutants on this list.

Name CAS Air Water Annex X of Dir 2000/60/EC
Dust including fine particulate matter
yes

IPPC, Annexes V, VI, VIII - Provisions relating to industrial plants

This list contains emission limit values for polluting substances in waste gases and waste water, assigned according to facility type (i.e., combustion plants (Annex V), waste incineration/co-incineration plants (Annex VI), and installations producing titanium dioxide (Annex VIII)), under Directive 2010/75/EU on Industrial Emissions (Integrated Pollution Prevention and Control - IPPC). For this list, if a substance presents 2 values in the ''Average sampling duration'' field, these indicate minimum and maximum average sampling period.

Name CAS Expressed As Annex Group Average duration qualifier Average limit Maximum limit Average sampling duration Emission medium fuel Fuel class Part Point Thermal input Process/equipment Qualifier Notes  
Dust
V Annex V (Directive 2010/75/EU) Technical provisions relating to combustion plants
30 mg/Nm3
Waste gases
Coal and lignite and other solid fuels
Solid
Part 1 (V) Emission limit values for combustion plants referred to in Article 30(2)
7
50-100
Combustion plants using solid or liquid fuels with the exception of gas turbines and gas engines
00 All emission limit values shall be calculated at a temperature of 273,15 K, a pressure of 101,3 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels, 3 % for combustion plants, other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines
37 For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU
Details
Dust
V Annex V (Directive 2010/75/EU) Technical provisions relating to combustion plants
25 mg/Nm3
Waste gases
Coal and lignite and other solid fuels
Solid
Part 1 (V) Emission limit values for combustion plants referred to in Article 30(2)
7
100-300
Combustion plants using solid or liquid fuels with the exception of gas turbines and gas engines
00 All emission limit values shall be calculated at a temperature of 273,15 K, a pressure of 101,3 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels, 3 % for combustion plants, other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines
37 For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU
Details
Dust
V Annex V (Directive 2010/75/EU) Technical provisions relating to combustion plants
20 mg/Nm3
Waste gases
Coal and lignite and other solid fuels
Solid
Part 1 (V) Emission limit values for combustion plants referred to in Article 30(2)
7
> 300
Combustion plants using solid or liquid fuels with the exception of gas turbines and gas engines
00 All emission limit values shall be calculated at a temperature of 273,15 K, a pressure of 101,3 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels, 3 % for combustion plants, other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines
37 For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU
Details
Dust
V Annex V (Directive 2010/75/EU) Technical provisions relating to combustion plants
30 mg/Nm3
Waste gases
Biomass and Peat
Solid
Part 1 (V) Emission limit values for combustion plants referred to in Article 30(2)
7
50-100
Combustion plants using solid or liquid fuels with the exception of gas turbines and gas engines
00 All emission limit values shall be calculated at a temperature of 273,15 K, a pressure of 101,3 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels, 3 % for combustion plants, other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines
37 For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU
Details
Dust
V Annex V (Directive 2010/75/EU) Technical provisions relating to combustion plants
20 mg/Nm3
Waste gases
Biomass and Peat
Solid
Part 1 (V) Emission limit values for combustion plants referred to in Article 30(2)
7
100-300
Combustion plants using solid or liquid fuels with the exception of gas turbines and gas engines
00 All emission limit values shall be calculated at a temperature of 273,15 K, a pressure of 101,3 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels, 3 % for combustion plants, other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines
37 For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU
Details
Dust
V Annex V (Directive 2010/75/EU) Technical provisions relating to combustion plants
20 mg/Nm3
Waste gases
Biomass and Peat
Solid
Part 1 (V) Emission limit values for combustion plants referred to in Article 30(2)
7
> 300
Combustion plants using solid or liquid fuels with the exception of gas turbines and gas engines
00 All emission limit values shall be calculated at a temperature of 273,15 K, a pressure of 101,3 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels, 3 % for combustion plants, other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines
37 For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU
Details
Dust
V Annex V (Directive 2010/75/EU) Technical provisions relating to combustion plants
30 mg/Nm3
Waste gases
Liquid
Part 1 (V) Emission limit values for combustion plants referred to in Article 30(2)
7
50-100
Combustion plants using solid or liquid fuels with the exception of gas turbines and gas engines
00 All emission limit values shall be calculated at a temperature of 273,15 K, a pressure of 101,3 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels, 3 % for combustion plants, other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines
17 The emission limit value is 50 mg/Nm3 for the firing of distillation and conversion residues from the refining of crude oil for own consumption in combustion plants which were granted a permit before 27 November 2002 or the operators of which had submitted a complete application for a permit before that date, provided that the plant was put into operation no later than 27 November 2003
37 For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU
Details
Dust
V Annex V (Directive 2010/75/EU) Technical provisions relating to combustion plants
25 mg/Nm3
Waste gases
Liquid
Part 1 (V) Emission limit values for combustion plants referred to in Article 30(2)
7
100-300
Combustion plants using solid or liquid fuels with the exception of gas turbines and gas engines
00 All emission limit values shall be calculated at a temperature of 273,15 K, a pressure of 101,3 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels, 3 % for combustion plants, other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines
17 The emission limit value is 50 mg/Nm3 for the firing of distillation and conversion residues from the refining of crude oil for own consumption in combustion plants which were granted a permit before 27 November 2002 or the operators of which had submitted a complete application for a permit before that date, provided that the plant was put into operation no later than 27 November 2003
37 For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU
Details
Dust
V Annex V (Directive 2010/75/EU) Technical provisions relating to combustion plants
20 mg/Nm3
Waste gases
Liquid
Part 1 (V) Emission limit values for combustion plants referred to in Article 30(2)
7
> 300
Combustion plants using solid or liquid fuels with the exception of gas turbines and gas engines
00 All emission limit values shall be calculated at a temperature of 273,15 K, a pressure of 101,3 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels, 3 % for combustion plants, other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines
17 The emission limit value is 50 mg/Nm3 for the firing of distillation and conversion residues from the refining of crude oil for own consumption in combustion plants which were granted a permit before 27 November 2002 or the operators of which had submitted a complete application for a permit before that date, provided that the plant was put into operation no later than 27 November 2003
37 For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU
Details
Dust
V Annex V (Directive 2010/75/EU) Technical provisions relating to combustion plants
5 mg/Nm3
Waste gases
In general
Gas
Part 1 (V) Emission limit values for combustion plants referred to in Article 30(2)
8
Combustion plants using gaseous fuels with the exception of gas turbines and gas engines
00 All emission limit values shall be calculated at a temperature of 273,15 K, a pressure of 101,3 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels, 3 % for combustion plants, other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines
37 For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU
Details
Dust
V Annex V (Directive 2010/75/EU) Technical provisions relating to combustion plants
10 mg/Nm3
Waste gases
Blast furnace gas
Gas
Part 1 (V) Emission limit values for combustion plants referred to in Article 30(2)
8
Combustion plants using gaseous fuels with the exception of gas turbines and gas engines
00 All emission limit values shall be calculated at a temperature of 273,15 K, a pressure of 101,3 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels, 3 % for combustion plants, other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines
37 For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU
Details
Dust
V Annex V (Directive 2010/75/EU) Technical provisions relating to combustion plants
30 mg/Nm3
Waste gases
Gases produced by the steel industry which can be used elsewhere
Gas
Part 1 (V) Emission limit values for combustion plants referred to in Article 30(2)
8
Combustion plants using gaseous fuels with the exception of gas turbines and gas engines
00 All emission limit values shall be calculated at a temperature of 273,15 K, a pressure of 101,3 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels, 3 % for combustion plants, other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines
37 For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU
Details
Dust
V Annex V (Directive 2010/75/EU) Technical provisions relating to combustion plants
20 mg/Nm3
Waste gases
Solid or Liquid
Part 2 (V) Emission limit values for combustion plants referred to in Article 30(3)
7
50-300
Combustion plants using solid or liquid fuels with the exception of gas turbines and gas engines
00 All emission limit values shall be calculated at a temperature of 273,15 K, a pressure of 101,3 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels, 3 % for combustion plants, other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines
37 For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU
Details
Dust
V Annex V (Directive 2010/75/EU) Technical provisions relating to combustion plants
10 mg/Nm3
Waste gases
Solid or Liquid
Part 2 (V) Emission limit values for combustion plants referred to in Article 30(3)
7
> 300
Combustion plants using solid or liquid fuels with the exception of gas turbines and gas engines
00 All emission limit values shall be calculated at a temperature of 273,15 K, a pressure of 101,3 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels, 3 % for combustion plants, other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines
37 For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU
Details
Dust
V Annex V (Directive 2010/75/EU) Technical provisions relating to combustion plants
20 mg/Nm3
Waste gases
Biomass and Peat
Solid or Liquid
Part 2 (V) Emission limit values for combustion plants referred to in Article 30(3)
7
> 300
Combustion plants using solid or liquid fuels with the exception of gas turbines and gas engines
00 All emission limit values shall be calculated at a temperature of 273,15 K, a pressure of 101,3 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels, 3 % for combustion plants, other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines
37 For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU
Details
Dust
V Annex V (Directive 2010/75/EU) Technical provisions relating to combustion plants
5 mg/Nm3
Waste gases
In general
Gas
Part 2 (V) Emission limit values for combustion plants referred to in Article 30(3)
8
Combustion plants using gaseous fuels with the exception of gas turbines and gas engines
00 All emission limit values shall be calculated at a temperature of 273,15 K, a pressure of 101,3 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels, 3 % for combustion plants, other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines
37 For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU
Details
Dust
V Annex V (Directive 2010/75/EU) Technical provisions relating to combustion plants
10 mg/Nm3
Waste gases
Blast furnace gas
Gas
Part 2 (V) Emission limit values for combustion plants referred to in Article 30(3)
8
Combustion plants using gaseous fuels with the exception of gas turbines and gas engines
00 All emission limit values shall be calculated at a temperature of 273,15 K, a pressure of 101,3 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels, 3 % for combustion plants, other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines
37 For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU
Details
Dust
V Annex V (Directive 2010/75/EU) Technical provisions relating to combustion plants
30 mg/Nm3
Waste gases
Gases produced by the steel industry which can be used elsewhere
Gas
Part 2 (V) Emission limit values for combustion plants referred to in Article 30(3)
8
Combustion plants using gaseous fuels with the exception of gas turbines and gas engines
00 All emission limit values shall be calculated at a temperature of 273,15 K, a pressure of 101,3 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels, 3 % for combustion plants, other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines
37 For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU
Details
Dust
VI Annex VI (Directive 2010/75/EU) Technical provisions relating to waste incineration plants and waste co-incineration plants
10 mg/Nm3
1 d
Waste gases
Part 3 (VI) Air emission limit values for waste incineration plants
1.1
Waste incineration plants
21 All emission limit values shall be calculated at a temperature of 273,15 K, a pressure of 101,3 kPa and after correcting for the water vapour content of the waste gases.They are standardised at 11 % oxygen in waste gas except in case of incineration of mineral waste oil as defined in point 3 of Article 3 of Directive 2008/98/EC, when they are standardised at 3 % oxygen, and in the cases referred to in Point 2.7 of Part 6
39 For technical provisions regarding 'Monitoring of emissions' see Part 6 (Annex VI). For 'Formula to calculate the emission concentration at the standard percentage oxygen concentration' see Part 7 (Annex VI). For 'Assessment of compliance with emission limit values' see Part 8 (Annex VI) Directive 2010/75/EU
Details
Dust
VI Annex VI (Directive 2010/75/EU) Technical provisions relating to waste incineration plants and waste co-incineration plants
100 % of the measured values
30 mg/Nm3
0.5 h
Waste gases
Part 3 (VI) Air emission limit values for waste incineration plants
1.2
Waste incineration plants
21 All emission limit values shall be calculated at a temperature of 273,15 K, a pressure of 101,3 kPa and after correcting for the water vapour content of the waste gases.They are standardised at 11 % oxygen in waste gas except in case of incineration of mineral waste oil as defined in point 3 of Article 3 of Directive 2008/98/EC, when they are standardised at 3 % oxygen, and in the cases referred to in Point 2.7 of Part 6
39 For technical provisions regarding 'Monitoring of emissions' see Part 6 (Annex VI). For 'Formula to calculate the emission concentration at the standard percentage oxygen concentration' see Part 7 (Annex VI). For 'Assessment of compliance with emission limit values' see Part 8 (Annex VI) Directive 2010/75/EU
Details
Dust
VI Annex VI (Directive 2010/75/EU) Technical provisions relating to waste incineration plants and waste co-incineration plants
97 % of the measured values
10 mg/Nm3
0.5 h
Waste gases
Part 3 (VI) Air emission limit values for waste incineration plants
1.2
Waste incineration plants
21 All emission limit values shall be calculated at a temperature of 273,15 K, a pressure of 101,3 kPa and after correcting for the water vapour content of the waste gases.They are standardised at 11 % oxygen in waste gas except in case of incineration of mineral waste oil as defined in point 3 of Article 3 of Directive 2008/98/EC, when they are standardised at 3 % oxygen, and in the cases referred to in Point 2.7 of Part 6
27 Emission limit values applicable in the circumstances described in Article 46(6) and Article 47.The total dust concentration in the emissions into the air of a waste incineration plant shall under no circumstances exceed 150 mg/Nm3 expressed as a half-hourly average (Annex VI, Part 3, Point 2)
39 For technical provisions regarding 'Monitoring of emissions' see Part 6 (Annex VI). For 'Formula to calculate the emission concentration at the standard percentage oxygen concentration' see Part 7 (Annex VI). For 'Assessment of compliance with emission limit values' see Part 8 (Annex VI) Directive 2010/75/EU
Details
Dust
VI Annex VI (Directive 2010/75/EU) Technical provisions relating to waste incineration plants and waste co-incineration plants
30 mg/Nm3
1 d
Waste gases
Part 4 (VI) Determination of air emission limit values for the co-incineration of waste
2.2
Cement kilns co-incinerating waste
28 All values are standardised at 10 % oxygen
30 All emission limit values shall be calculated at a temperature of 273,15 K, a pressure of 101,3 kPa and after correcting for the water vapour content of the waste gases
39 For technical provisions regarding 'Monitoring of emissions' see Part 6 (Annex VI). For 'Formula to calculate the emission concentration at the standard percentage oxygen concentration' see Part 7 (Annex VI). For 'Assessment of compliance with emission limit values' see Part 8 (Annex VI) Directive 2010/75/EU
Details
Dust
VI Annex VI (Directive 2010/75/EU) Technical provisions relating to waste incineration plants and waste co-incineration plants
50 mg/Nm3
1 d
Waste gases
Solid fuels with exception of biomass
Solid
Part 4 (VI) Determination of air emission limit values for the co-incineration of waste
3.2.1
< 50
Combustion plants co-incinerating waste
For combustion plants referred to in Article 30(2), with the exception of gas turbines and gas engines
30 All emission limit values shall be calculated at a temperature of 273,15 K, a pressure of 101,3 kPa and after correcting for the water vapour content of the waste gases
31 O2 content 6%
Details
Dust
VI Annex VI (Directive 2010/75/EU) Technical provisions relating to waste incineration plants and waste co-incineration plants
30 mg/Nm3
1 d
Waste gases
Solid fuels with exception of biomass
Solid
Part 4 (VI) Determination of air emission limit values for the co-incineration of waste
3.2.1
50-100
Combustion plants co-incinerating waste
For combustion plants referred to in Article 30(2), with the exception of gas turbines and gas engines
30 All emission limit values shall be calculated at a temperature of 273,15 K, a pressure of 101,3 kPa and after correcting for the water vapour content of the waste gases
31 O2 content 6%
Details
Dust
VI Annex VI (Directive 2010/75/EU) Technical provisions relating to waste incineration plants and waste co-incineration plants
25 mg/Nm3
1 d
Waste gases
Solid fuels with exception of biomass and peat
Solid
Part 4 (VI) Determination of air emission limit values for the co-incineration of waste
3.2.1
100-300
Combustion plants co-incinerating waste
For combustion plants referred to in Article 30(2), with the exception of gas turbines and gas engines
30 All emission limit values shall be calculated at a temperature of 273,15 K, a pressure of 101,3 kPa and after correcting for the water vapour content of the waste gases
31 O2 content 6%
Details
Dust
VI Annex VI (Directive 2010/75/EU) Technical provisions relating to waste incineration plants and waste co-incineration plants
20 mg/Nm3
1 d
Waste gases
Peat
Solid
Part 4 (VI) Determination of air emission limit values for the co-incineration of waste
3.2.1
100-300
Combustion plants co-incinerating waste
For combustion plants referred to in Article 30(2), with the exception of gas turbines and gas engines
30 All emission limit values shall be calculated at a temperature of 273,15 K, a pressure of 101,3 kPa and after correcting for the water vapour content of the waste gases
31 O2 content 6%
Details
Dust
VI Annex VI (Directive 2010/75/EU) Technical provisions relating to waste incineration plants and waste co-incineration plants
20 mg/Nm3
1 d
Waste gases
Solid fuels with exception of biomass
Solid
Part 4 (VI) Determination of air emission limit values for the co-incineration of waste
3.2.1
> 300
Combustion plants co-incinerating waste
For combustion plants referred to in Article 30(2), with the exception of gas turbines and gas engines
30 All emission limit values shall be calculated at a temperature of 273,15 K, a pressure of 101,3 kPa and after correcting for the water vapour content of the waste gases
31 O2 content 6%
Details
Dust
VI Annex VI (Directive 2010/75/EU) Technical provisions relating to waste incineration plants and waste co-incineration plants
50 mg/Nm3
1 d
Waste gases
Biomass
Solid
Part 4 (VI) Determination of air emission limit values for the co-incineration of waste
3.2.1
< 50
Combustion plants co-incinerating waste
For combustion plants referred to in Article 30(2), with the exception of gas turbines and gas engines
30 All emission limit values shall be calculated at a temperature of 273,15 K, a pressure of 101,3 kPa and after correcting for the water vapour content of the waste gases
31 O2 content 6%
Details
Dust
VI Annex VI (Directive 2010/75/EU) Technical provisions relating to waste incineration plants and waste co-incineration plants
30 mg/Nm3
1 d
Waste gases
Biomass
Solid
Part 4 (VI) Determination of air emission limit values for the co-incineration of waste
3.2.1
50-100
Combustion plants co-incinerating waste
For combustion plants referred to in Article 30(2), with the exception of gas turbines and gas engines
30 All emission limit values shall be calculated at a temperature of 273,15 K, a pressure of 101,3 kPa and after correcting for the water vapour content of the waste gases
31 O2 content 6%
Details
Dust
VI Annex VI (Directive 2010/75/EU) Technical provisions relating to waste incineration plants and waste co-incineration plants
20 mg/Nm3
1 d
Waste gases
Biomass
Solid
Part 4 (VI) Determination of air emission limit values for the co-incineration of waste
3.2.1
100-300
Combustion plants co-incinerating waste
For combustion plants referred to in Article 30(2), with the exception of gas turbines and gas engines
30 All emission limit values shall be calculated at a temperature of 273,15 K, a pressure of 101,3 kPa and after correcting for the water vapour content of the waste gases
31 O2 content 6%
Details
Dust
VI Annex VI (Directive 2010/75/EU) Technical provisions relating to waste incineration plants and waste co-incineration plants
20 mg/Nm3
1 d
Waste gases
Biomass
Solid
Part 4 (VI) Determination of air emission limit values for the co-incineration of waste
3.2.1
> 300
Combustion plants co-incinerating waste
For combustion plants referred to in Article 30(2), with the exception of gas turbines and gas engines
30 All emission limit values shall be calculated at a temperature of 273,15 K, a pressure of 101,3 kPa and after correcting for the water vapour content of the waste gases
31 O2 content 6%
Details
Dust
VI Annex VI (Directive 2010/75/EU) Technical provisions relating to waste incineration plants and waste co-incineration plants
50 mg/Nm3
1 d
Waste gases
Liquid
Part 4 (VI) Determination of air emission limit values for the co-incineration of waste
3.2.1
< 50
Combustion plants co-incinerating waste
For combustion plants referred to in Article 30(2), with the exception of gas turbines and gas engines
30 All emission limit values shall be calculated at a temperature of 273,15 K, a pressure of 101,3 kPa and after correcting for the water vapour content of the waste gases
32 O2 content 3%
Details
Dust
VI Annex VI (Directive 2010/75/EU) Technical provisions relating to waste incineration plants and waste co-incineration plants
30 mg/Nm3
1 d
Waste gases
Liquid
Part 4 (VI) Determination of air emission limit values for the co-incineration of waste
3.2.1
50-100
Combustion plants co-incinerating waste
For combustion plants referred to in Article 30(2), with the exception of gas turbines and gas engines
30 All emission limit values shall be calculated at a temperature of 273,15 K, a pressure of 101,3 kPa and after correcting for the water vapour content of the waste gases
32 O2 content 3%
Details
Dust
VI Annex VI (Directive 2010/75/EU) Technical provisions relating to waste incineration plants and waste co-incineration plants
25 mg/Nm3
1 d
Waste gases
Liquid
Part 4 (VI) Determination of air emission limit values for the co-incineration of waste
3.2.1
100-300
Combustion plants co-incinerating waste
For combustion plants referred to in Article 30(2), with the exception of gas turbines and gas engines
30 All emission limit values shall be calculated at a temperature of 273,15 K, a pressure of 101,3 kPa and after correcting for the water vapour content of the waste gases
32 O2 content 3%
Details
Dust
VI Annex VI (Directive 2010/75/EU) Technical provisions relating to waste incineration plants and waste co-incineration plants
20 mg/Nm3
1 d
Waste gases
Liquid
Part 4 (VI) Determination of air emission limit values for the co-incineration of waste
3.2.1
> 300
Combustion plants co-incinerating waste
For combustion plants referred to in Article 30(2), with the exception of gas turbines and gas engines
30 All emission limit values shall be calculated at a temperature of 273,15 K, a pressure of 101,3 kPa and after correcting for the water vapour content of the waste gases
32 O2 content 3%
Details
Dust
VI Annex VI (Directive 2010/75/EU) Technical provisions relating to waste incineration plants and waste co-incineration plants
50 mg/Nm3
1 d
Waste gases
Solid fuels with exception of biomass
Solid
Part 4 (VI) Determination of air emission limit values for the co-incineration of waste
3.2.2
< 50
Combustion plants co-incinerating waste
For combustion plants referred to in Article 30(3), with the exception of gas turbines and gas engines
30 All emission limit values shall be calculated at a temperature of 273,15 K, a pressure of 101,3 kPa and after correcting for the water vapour content of the waste gases
31 O2 content 6%
Details
Dust
VI Annex VI (Directive 2010/75/EU) Technical provisions relating to waste incineration plants and waste co-incineration plants
20 mg/Nm3
1 d
Waste gases
Solid fuels with exception of biomass
Solid
Part 4 (VI) Determination of air emission limit values for the co-incineration of waste
3.2.2
50-100
Combustion plants co-incinerating waste
For combustion plants referred to in Article 30(3), with the exception of gas turbines and gas engines
30 All emission limit values shall be calculated at a temperature of 273,15 K, a pressure of 101,3 kPa and after correcting for the water vapour content of the waste gases
31 O2 content 6%
Details
Dust
VI Annex VI (Directive 2010/75/EU) Technical provisions relating to waste incineration plants and waste co-incineration plants
20 mg/Nm3
1 d
Waste gases
Solid fuels with exception of biomass
Solid
Part 4 (VI) Determination of air emission limit values for the co-incineration of waste
3.2.2
100-300
Combustion plants co-incinerating waste
For combustion plants referred to in Article 30(3), with the exception of gas turbines and gas engines
30 All emission limit values shall be calculated at a temperature of 273,15 K, a pressure of 101,3 kPa and after correcting for the water vapour content of the waste gases
31 O2 content 6%
Details
Dust
VI Annex VI (Directive 2010/75/EU) Technical provisions relating to waste incineration plants and waste co-incineration plants
10 mg/Nm3
1 d
Waste gases
Solid fuels with exception of biomass and peat
Solid
Part 4 (VI) Determination of air emission limit values for the co-incineration of waste
3.2.2
> 300
Combustion plants co-incinerating waste
For combustion plants referred to in Article 30(3), with the exception of gas turbines and gas engines
30 All emission limit values shall be calculated at a temperature of 273,15 K, a pressure of 101,3 kPa and after correcting for the water vapour content of the waste gases
31 O2 content 6%
Details
Dust
VI Annex VI (Directive 2010/75/EU) Technical provisions relating to waste incineration plants and waste co-incineration plants
20 mg/Nm3
1 d
Waste gases
Peat
Solid
Part 4 (VI) Determination of air emission limit values for the co-incineration of waste
3.2.2
> 300
Combustion plants co-incinerating waste
For combustion plants referred to in Article 30(3), with the exception of gas turbines and gas engines
30 All emission limit values shall be calculated at a temperature of 273,15 K, a pressure of 101,3 kPa and after correcting for the water vapour content of the waste gases
31 O2 content 6%
Details
Dust
VI Annex VI (Directive 2010/75/EU) Technical provisions relating to waste incineration plants and waste co-incineration plants
50 mg/Nm3
1 d
Waste gases
Biomass
Solid
Part 4 (VI) Determination of air emission limit values for the co-incineration of waste
3.2.2
< 50
Combustion plants co-incinerating waste
For combustion plants referred to in Article 30(3), with the exception of gas turbines and gas engines
30 All emission limit values shall be calculated at a temperature of 273,15 K, a pressure of 101,3 kPa and after correcting for the water vapour content of the waste gases
31 O2 content 6%
Details
Dust
VI Annex VI (Directive 2010/75/EU) Technical provisions relating to waste incineration plants and waste co-incineration plants
20 mg/Nm3
1 d
Waste gases
Biomass
Solid
Part 4 (VI) Determination of air emission limit values for the co-incineration of waste
3.2.2
50-100
Combustion plants co-incinerating waste
For combustion plants referred to in Article 30(3), with the exception of gas turbines and gas engines
30 All emission limit values shall be calculated at a temperature of 273,15 K, a pressure of 101,3 kPa and after correcting for the water vapour content of the waste gases
31 O2 content 6%
Details
Dust
VI Annex VI (Directive 2010/75/EU) Technical provisions relating to waste incineration plants and waste co-incineration plants
20 mg/Nm3
1 d
Waste gases
Biomass
Solid
Part 4 (VI) Determination of air emission limit values for the co-incineration of waste
3.2.2
100-300
Combustion plants co-incinerating waste
For combustion plants referred to in Article 30(3), with the exception of gas turbines and gas engines
30 All emission limit values shall be calculated at a temperature of 273,15 K, a pressure of 101,3 kPa and after correcting for the water vapour content of the waste gases
31 O2 content 6%
Details
Dust
VI Annex VI (Directive 2010/75/EU) Technical provisions relating to waste incineration plants and waste co-incineration plants
20 mg/Nm3
1 d
Waste gases
Biomass
Solid
Part 4 (VI) Determination of air emission limit values for the co-incineration of waste
3.2.2
> 300
Combustion plants co-incinerating waste
For combustion plants referred to in Article 30(3), with the exception of gas turbines and gas engines
30 All emission limit values shall be calculated at a temperature of 273,15 K, a pressure of 101,3 kPa and after correcting for the water vapour content of the waste gases
31 O2 content 6%
Details
Dust
VI Annex VI (Directive 2010/75/EU) Technical provisions relating to waste incineration plants and waste co-incineration plants
50 mg/Nm3
1 d
Waste gases
Liquid
Part 4 (VI) Determination of air emission limit values for the co-incineration of waste
3.2.2
< 50
Combustion plants co-incinerating waste
For combustion plants referred to in Article 30(3), with the exception of gas turbines and gas engines
30 All emission limit values shall be calculated at a temperature of 273,15 K, a pressure of 101,3 kPa and after correcting for the water vapour content of the waste gases
32 O2 content 3%
Details
Dust
VI Annex VI (Directive 2010/75/EU) Technical provisions relating to waste incineration plants and waste co-incineration plants
20 mg/Nm3
1 d
Waste gases
Liquid
Part 4 (VI) Determination of air emission limit values for the co-incineration of waste
3.2.2
50-100
Combustion plants co-incinerating waste
For combustion plants referred to in Article 30(3), with the exception of gas turbines and gas engines
30 All emission limit values shall be calculated at a temperature of 273,15 K, a pressure of 101,3 kPa and after correcting for the water vapour content of the waste gases
32 O2 content 3%
Details
Dust
VI Annex VI (Directive 2010/75/EU) Technical provisions relating to waste incineration plants and waste co-incineration plants
20 mg/Nm3
1 d
Waste gases
Liquid
Part 4 (VI) Determination of air emission limit values for the co-incineration of waste
3.2.2
100-300
Combustion plants co-incinerating waste
For combustion plants referred to in Article 30(3), with the exception of gas turbines and gas engines
30 All emission limit values shall be calculated at a temperature of 273,15 K, a pressure of 101,3 kPa and after correcting for the water vapour content of the waste gases
32 O2 content 3%
Details
Dust
VI Annex VI (Directive 2010/75/EU) Technical provisions relating to waste incineration plants and waste co-incineration plants
10 mg/Nm3
1 d
Waste gases
Liquid
Part 4 (VI) Determination of air emission limit values for the co-incineration of waste
3.2.2
> 300
Combustion plants co-incinerating waste
For combustion plants referred to in Article 30(3), with the exception of gas turbines and gas engines
30 All emission limit values shall be calculated at a temperature of 273,15 K, a pressure of 101,3 kPa and after correcting for the water vapour content of the waste gases
32 O2 content 3%
Details
Dust
VIII Annex VIII (Directive 2010/75/EU) Technical provisions relating to installations producing titanium dioxide
50 mg/Nm3
1 h
Waste gases
Part 2 (VIII) Emission limit values into air
Installations producing titanium dioxide
From major sources
42 The emission limit values which are expressed as concentrations in mass per cubic meter (Nm3) shall be calculated at a temperature of 273,15 K, and a pressure of 101,3 kPa
Details
Dust
VIII Annex VIII (Directive 2010/75/EU) Technical provisions relating to installations producing titanium dioxide
150 mg/Nm3
1 h
Waste gases
Part 2 (VIII) Emission limit values into air
Installations producing titanium dioxide
From sources other than major sources
42 The emission limit values which are expressed as concentrations in mass per cubic meter (Nm3) shall be calculated at a temperature of 273,15 K, and a pressure of 101,3 kPa
Details