Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 951-814-6 | CAS number: -
Guidance on Safe Use
Administrative data
First-aid measures
Inhalation: Remove to fresh air. If breathing stops, provide artificial respiration. Get medical attention immediately.
Skin Contact: Wash off immediately with plenty of water. Continue to rinse for at least 15 minutes. Immediately
take off all contaminated clothing. Get medical attention if irritation develops and persists.
Eye Contact: In case of eye contact, remove contact lens and rinse immediately with plenty of water, also under
the eyelids, for at least 15 minutes. Get medical attention.
Ingestion: Immediately give large quantities of water to drink. Never give anything by mouth to a victim who is
unconscious or is having convulsions. Call a physician immediately.
Most important symptoms and effects, both acute and delayed:-
Harmful if swallowed. Causes serious eye damage. Causes skin irritation. May cause sensitisation
by skin contact. May cause heritable damage. May cause reproductive effects. May cause bone
marrow effects. Prolonged or repeated exposure may cause: Gastrointestinal effects
Fire-fighting measures
Suitable extinguishing media: Carbon dioxide, dry chemical or water.
Dust may form explosive mixture with air. Hazardous decomposition products formed under fire
conditions.
Wear self-contained breathing apparatus and protective clothing
Accidental release measures
Wear suitable protective clothing, gloves and eye/face protection. See Section 8 for personal protective equipment.
Avoid discharge into drains, water courses or onto the ground.
Do not sweep. Collect spill using a vacuum cleaner with a HEPA filter. Be aware of potential for
dust explosion when using electrical equipment. If vacuum is not available, lightly mist/wet
material and remove by mopping or wet wiping.
Handling and storage
Minimise dust generation and accumulation. Keep away from heat and sources of ignition. Avoid
contact with eyes, skin, and clothing. Keep container tightly closed in a dry and well-ventilated place.
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Use appropriate control measures such as fume hood, ventilated enclosure, local exhaust ventilation, or down-draft booth. Open handling is not recommended.
Eye/face protection: Safety glasses with side-shields conforming to EN 166
Skin protection: Protective gloves complying with EN 374. Chemical resistant gloves. Chemical-resistant gloves and impermeable body covering to minimize skin contact.
Respiratory protection: Use a properly fitted, air purifying or air fed respirator complying with an approved standard if a risk
assessment indicated that is necessary. Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). If the applicable occupational exposure level (OEL) is anticipated to be exceeded, wear an approved respirator with sufficient protection factor to control exposure below the OEL
Hygiene measures: Engineering controls should be used as the primary means to control workplace exposures.
Follow good workplace hygiene practices such as washing hands after handling this material
Stability and reactivity
Not water reactive.
This material should not be packaged or stored above the following temperature: 90 °C. (194°F). This temperature is based on a laboratory test (DSC) and assumes near atmospheric pressures and quantities of less than 500 kg (1100 lb) or 208 L (55 gal).
Hazardous polymerisation does not occur.
Conditions to avoid: None known
Incompatible materials: Strong oxidising substances
Hazardous decomposition products: Fire or excessive heat may produce hazardous decomposition products.
Disposal considerations
Dispose in accordance with all applicable regulations
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
