N-benzoyl-5'-O-[bis(4-methoxyphenyl)phenylmethyl]-2'-deoxyadenosine

Guidance on Safe Use

First-aid measures

General information: Consult a doctor. Show this safety data sheet to the doctor treating you.

- Following inhalation: If inhaled, remove affected person to fresh air. If respiratory arrest occurs, artificially ventilate. Seek medical attention.

- Following skin contact: Wash off with soap and plenty of water. Consult a doctor.

- Following eye contact: Rinse with plenty of water for at least 15 minutes and consult a doctor.

- Following ingestion: Never give anything by mouth to an unconscious person. Rinse mouth with water. Seek medical attention.

Main acute and delayed symptoms and effects: The main known symptoms and effects are listed on the label (see section 2.2 of the SDS) and/or described in chapter 11 "Toxicological information" of the SDS.

Indication of any immediate medical attention and special treatment needed: No data available

Fire-fighting measures

- Suitable extinguishing media: Water spray, alcohol-resistant foam, dry extinguishing agent or carbon dioxide.

- Special hazards arising from the substance or mixture: Carbon oxides, nitrogen oxides (NOx).

- Advice for fire fighter: In case of fire, wear personal respiratory equipment if necessary.

Accidental release measures

- Personal precautions, protective equipment and emergency procedures:

Use personal protective equipment. Avoid dust formation. Do not inhale vapours/mist/gas. Ensure adequate ventilation. Avoid inhalation of dust.

For personal protective equipment see section 8 "Exposure controls/Personal protection" of the SDS.

- Environmental precautions:

Prevent further leaks or spills if it can be done without risk. Do not flush to sewer. Avoid release to the environment.

- Methods and material for containment and cleaning up:

Collect and store dust-free. Sweep together and pick up. Dispose of in appropriate, closed containers.

-Reference to other sections

Disposal: see section 13 "Disposal considerations" of the SDS.

Handling and storage

- Precautions for safe handling:

Avoid contact with eyes and skin. Avoid formation of dust and aerosols. If dust is formed, provide adequate ventilation. Information on protective measures can be found in section 2.2 of the SDS.

- Conditions for safe storage, including any incompatibilities:

Keep container tightly closed in a dry, well-ventilated place. Kept in a cool place. Recommended storage temperature 2 - 8 °C.

Storage class (TRGS 510): 6.1D: non-combustible, acute toxicity category 3 / toxic or chronic hazardous substances

- Specific end uses

Apart from the uses mentioned in section 1.2 of the SDS, no other specific uses are foreseen.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:

3077

Shipping information

Proper shipping name and description:

3077 ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (N-benzoyl-5'-O-[bis(4-methoxyphenyl)phenylmethyl]-2'-deoxyadenosine)

Chemical name:

N-benzoyl-5'-O-[bis(4-methoxyphenyl)phenylmethyl]-2'-deoxyadenosine

Language:

English

Special provisions / remarks

Special provisions:

EHS marking required (ADR 2.2.9.1.10, IMDG Code 2.10.3) for individual packaging and combined packaging with inner packaging with hazardous substances > 5L for liquids and > 5 kg for solids.

Remarks:

- Environmental hazards: Yes

Shipping

Remarks

Marine transport (UN RTDG/IMDG)

UN number:

3077

Shipping information

Proper shipping name and description:

ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (N-benzoyl-5'-O-[bis(4-methoxyphenyl)phenylmethyl]-2'-deoxyadenosine)

Chemical name:

N-benzoyl-5'-O-[bis(4-methoxyphenyl)phenylmethyl]-2'-deoxyadenosine

Marine pollutant

Special provisions / remarks

Remarks:

EHS marking required (ADR 2.2.9.1.10, IMDG Code 2.10.3) for individual packaging and combined packaging with inner packaging with hazardous substances > 5L for liquids and > 5 kg for solids.

Air transport (UN RTDG/ICAO/IATA)

UN number:

3077

Shipping information

Proper shipping name and description:

Environmentally hazardous substance, solid, n.o.s. (N-benzoyl-5'-O-[bis(4-methoxyphenyl)phenylmethyl]-2'-deoxyadenosine)

Chemical name:

N-benzoyl-5'-O-[bis(4-methoxyphenyl)phenylmethyl]-2'-deoxyadenosine

Special provisions / remarks

Remarks:

- Environmental hazards: Yes

Additional transport information

Additional information

Special provisions / remarks / other:

EHS marking required (ADR 2.2.9.1.10, IMDG Code 2.10.3) for individual packaging and combined packaging with inner packaging with hazardous substances > 5L for liquids and > 5 kg for solids.

Exposure controls / personal protection

- Exposure controls and monitoring. Suitable technical control equipment:

The usual precautionary measures for handling chemicals must be observed. Before, wash your hands during breaks and at the end of work.

Personal protective equipment:

Eye/face protection:

Safety goggles with side protection according to EN 166

For eye protection, only use equipment that complies with official standards, such as NIOSH (US) or EN 166 (EU) that have been tested and approved

Skin protection:

Work with gloves. Gloves must be examined before use. Use a suitable removal method (without the glove surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with legal requirements and good laboratory practice. Washing and dry your hands. The protective gloves selected must meet the specifications of the EC Directive 2016/425 and the resulting EN 374 standard.

Body protection

Impermeable protective clothing.

The type of protective equipment must be suitable for the concentration and quantity of the hazardous substance selected at the workplace.

Respiratory Protection

Use a dust mask of type P95 (US) or type P1 (EU EN 143) to protect against harmful environmental influences. For higher levels of protection, use dust mask filters type OV/AG/P99 (US) or TYPE ABEK-P2 (EU EN 143).

Respiratory protective devices and components must be used in accordance with the relevant national regulations (e.g. NIOSH (US) or CEN (EU)).

Environmental exposure monitoring

Prevent further leakage or spillage, if it can be done safely. Do not allow to enter sewers. Entry into the environment should be avoided.

Stability and reactivity

1. Reactivity: No data available.

2. Chemical stability: Stable under specified storage conditions

3. Possibility of hazardous reactions: No data available.

4. Conditions to avoid: No data available.

5. Incompatible materials: Aluminium, alkali metals, strong oxidants

6. Hazardous decomposition products: Other decomposition products - No data available.

In case of fire, dangerous decomposition products may be formed. - Carbon oxides, nitrogen oxides (NOx)

In case of fire: see chapter 5 "Fire fighting measures" of the SDS.

Disposal considerations

- Waste treatment procedures:

- Product

These products must be dissolved in or mixed with a flammable solvent and burned in a chemical incinerator (with afterburner and exhaust air scrubber). Dispose of residual quantities and non-recyclable solutions at an approved waste disposal company. Product residues must be disposed of in accordance with Directive 2008/98/EC on waste and national and regional regulations. Leave the chemicals in the original containers. Do not mix with other wastes. Uncleaned containers must be treated in accordance with the product.

- Contaminated packaging

Dispose like unused product.