Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

General information
Take affected persons into the open air.
Instantly remove any clothing soiled by the product.
Do not leave affected persons unsupervised.
After inhalation
Supply fresh air. If required, provide artificial respiration. Keep patient warm. Consult doctor if
symptoms persist.
In case of unconsciousness bring patient into stable side position for transport.
After skin contact Instantly wash with water and soap and rinse thoroughly.
After eye contact
Rinse opened eye for several minutes under running water. If symptoms persist, consult doctor.
After swallowing
In case of persistent symptoms consult doctor.
Administer medicinal carbon (6-8 teaspoons) with two or three glasses of water. Do not giveanything by mouth to an unconscious person.

Fire-fighting measures

Extinguishing media
Suitable extinguishing agents: CO2, extinguishing powder or water jet. Fight larger fires with water jet or alcohol-resistant foam. For safety reasons unsuitable extinguishing agents Water with a full water jet.


Special hazards arising from the substance or mixture: Can be released in case of fire: Carbon monoxide (CO) and carbon dioxide (CO2)
Advice for firefighters: Protective equipment: Put on breathing apparatus

Accidental release measures

Personal precautions, protective equipment and emergency procedures: Wear protective equipment. Keep unprotected persons away. Wear suitable protective clothing. As a minimum this would include: splash googles, disposable lab coat with cuffs, chemical resistant gloves and breathing protection. Keep away from ignition sources. Ensure adequate ventilation.
Environmental precautions: Do not allow to enter drainage system, surface or ground water.
Methods and material for containment and cleaning up: Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders).

Handling and storage

Precautions for safe handling: Ensure good ventilation/exhaustion at the workplace. Keep away from heat and direct sunlight. Keep containers tightly sealed. Information about protection against explosions and fires: Keep away from sources of ignition - Do not smoke. Protect against electrostatic charges.
Conditions for safe storage, including any incompatibilities: Storage. Requirements to be met by storerooms and containers: No special requirements.
Information about storage in one common storage facility: Not required.
Further information about storage conditions: Store in cool, dry conditions in well sealed containers.
Specific end use(s): No further relevant information available.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
UN2297
Shippingopen allclose all
Class or division:
Class 3: Flammable liquids
Subsidiary hazard(s):
Class 3: Flammable liquids
Packing group:
Packing group III: Substances presenting low danger
Labels:
3
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
UN2297
Shippingopen allclose all
Class or division:
Class 3: Flammable liquids
Subsidiary hazard(s):
Class 3: Flammable liquids
Packing group:
Packing group III: Substances presenting low danger
Labels:
3
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
UN2297
Shippingopen allclose all
Class or division:
Class 3: Flammable liquids
Subsidiary hazard(s):
Class 3: Flammable liquids
Packing group:
Packing group III: Substances presenting low danger
EmS code:
F-E
S-D
Labels:
3
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
UN2297
Shippingopen allclose all
Class or division:
Class 3: Flammable liquids
Subsidiary hazard(s):
Class 3: Flammable liquids
Packing group:
Packing group III: Substances presenting low danger
Labels:
3
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Personal protective equipment
General protective and hygienic measures
Keep away from foodstuffs, beverages and food.
Wash hands during breaks and at the end of the work.
Breathing equipment:
In case of brief exposure or low pollution use breathing filter apparatus. In case of intensive or
longer exposure use breathing apparatus that is independent of circulating air.
Protection of hands: Chemical resistant protective gloves (EN 374).
Material of gloves: The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. The herein recommended suitable materials are for gloves that serve as protection from splashes. For a perpetual contact with the chemical no recommendation can be made.
Recommended thickness of the material: minimum 0.38 mm, Butyl rubber, BR, Fluorocarbon rubber (Viton), Nitrile rubber, NBR
Penetration time of glove material: The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Eye protection: Tightly sealed safety glasses (EN 166).
Body protection (acc. to EN 465): Protective work clothing.

Stability and reactivity

Reactivity: No further relevant information available.
Chemical stability: Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.
Possibility of hazardous reactions: No dangerous reactions known.
Conditions to avoid: No further relevant information available.
Incompatible materials: Strong oxidizing agents, Strong reducing agents, Strong bases, Keep away from ignition sources.
Hazardous decomposition products: No dangerous decomposition products know.

Disposal considerations

Waste treatment methods
Recommendation: Must not be disposed of together with household garbage. Do not allow product to reach sewage system.
After prior treatment product has to be disposed of in an incinerator for hazardous waste under adherence to the regulations pertaining to the disposal of particularly hazardous waste.
Uncleaned packagings:
Recommendation: Disposal must be made according to official regulations.