Substance Information
Substance Information
REACH Registration data can be found in the new ECHA CHEM database. The old ‘Registered substance factsheets’ will be available on this web site during the transition period but have not been updated since 19 May 2023. More
Substance Infocard
IC
Nitrogen oxide (NOx)
EC / List no.: -
CAS no.: 11104-93-1
Mol. Formula:
Here you can find all of the regulations and regulatory lists in which this substance appears, according to the data available to ECHA. This substance has been found in the following regulatory activities (directly, or inheriting the regulatory context of a parent substance):
| Region | Legislation | Emission medium | Process/equipment | Maximum emissions | Average emissions | Notes | |||
|---|---|---|---|---|---|---|---|---|---|
| Maximum limit | Maximum sampling duration | Average limit | Average sampling duration | ||||||
| European Union | Industrial Emissions Directive | Waste gases | Combustion plants using solid or liquid fuels with the exception of gas turbines and gas engines | 250.0 mg/Nm3 | All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU | ||||
| European Union | Industrial Emissions Directive | Waste gases | Combustion plants using solid or liquid fuels with the exception of gas turbines and gas engines | 200.0 mg/Nm3 | All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU | ||||
| European Union | Industrial Emissions Directive | Waste gases | Combustion plants using solid or liquid fuels with the exception of gas turbines and gas engines | 150.0 mg/Nm3 | All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU | ||||
| European Union | Industrial Emissions Directive | Waste gases | Combustion plants using solid or liquid fuels with the exception of gas turbines and gas engines | 200.0 mg/Nm3 | All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU | ||||
| European Union | Industrial Emissions Directive | Waste gases | Gas engines | 75.0 mg/Nm3 | All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines Gas turbines and gas engines for emergency use that operate less than 500 operating hours per year are not covered by the emission limit values set out in this point. The operator of such plants shall record the used operating hours For single cycle gas turbines having an efficiency greater than 35 % - determined at ISO base load conditions - the emission limit value for NOx shall be 50xɳ/35 where ɳ is the gas turbine efficiency at ISO base load conditions expressed as a percentage For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU | ||||
| European Union | Industrial Emissions Directive | Waste gases | Combustion plants co-incinerating waste | 200.0 mg/Nm3 | 1.0 d | All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correcting for the water vapour content of the waste gases O2 content 6% | |||
| European Union | Industrial Emissions Directive | Waste gases | Combustion plants co-incinerating waste | 200.0 mg/Nm3 | 1.0 d | All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correcting for the water vapour content of the waste gases O2 content 3% | |||
| European Union | Industrial Emissions Directive | Waste gases | Combustion plants co-incinerating waste | 400.0 mg/Nm3 | 1.0 d | All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correcting for the water vapour content of the waste gases O2 content 3% | |||
| European Union | Industrial Emissions Directive | Waste gases | Combustion plants co-incinerating waste | 200.0 mg/Nm3 | 1.0 d | All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correcting for the water vapour content of the waste gases O2 content 6% | |||
| European Union | Industrial Emissions Directive | Waste gases | Combustion plants co-incinerating waste | 250.0 mg/Nm3 | 1.0 d | All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correcting for the water vapour content of the waste gases O2 content 6% | |||
| European Union | Industrial Emissions Directive | Waste gases | Combustion plants using solid or liquid fuels with the exception of gas turbines and gas engines | 200.0 mg/Nm3 | All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines Combustion plants using solid or liquid fuels with a total rated thermal input not exceeding 500 MW which were granted a permit before 27 Nov 2002 or the operators of which had submitted a complete application for a permit before that date provided that the plant was put into operation no later than 27 Nov 2003 and which do not operate more than 1 500 operating hours per year as a rolling average over a period of 5 years shall be subject to an emission limit value for NOx of 450 mg/Nm3 Combustion plants using solid fuels with a total rated thermal input greater than 500 MW which were granted a permit before 1 July 1987 and which do not operate more than 1 500 operating hours per year as a rolling average over a period of 5 years shall be subject to an emission limit value for NOx of 450 mg/Nm3 For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU | ||||
| European Union | Industrial Emissions Directive | Waste gases | Combustion plants using solid or liquid fuels with the exception of gas turbines and gas engines | 450.0 mg/Nm3 | All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines Combustion plants using solid or liquid fuels with a total rated thermal input not exceeding 500 MW which were granted a permit before 27 Nov 2002 or the operators of which had submitted a complete application for a permit before that date provided that the plant was put into operation no later than 27 Nov 2003 and which do not operate more than 1 500 operating hours per year as a rolling average over a period of 5 years shall be subject to an emission limit value for NOx of 450 mg/Nm3 Combustion plants using solid fuels with a total rated thermal input greater than 500 MW which were granted a permit before 1 July 1987 and which do not operate more than 1 500 operating hours per year as a rolling average over a period of 5 years shall be subject to an emission limit value for NOx of 450 mg/Nm3 For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU | ||||
| European Union | Industrial Emissions Directive | Waste gases | Combustion plants using solid or liquid fuels with the exception of gas turbines and gas engines | 300.0 mg/Nm3 | All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines Combustion plants using solid or liquid fuels with a total rated thermal input not exceeding 500 MW which were granted a permit before 27 Nov 2002 or the operators of which had submitted a complete application for a permit before that date provided that the plant was put into operation no later than 27 Nov 2003 and which do not operate more than 1 500 operating hours per year as a rolling average over a period of 5 years shall be subject to an emission limit value for NOx of 450 mg/Nm3 Combustion plants using solid fuels with a total rated thermal input greater than 500 MW which were granted a permit before 1 July 1987 and which do not operate more than 1 500 operating hours per year as a rolling average over a period of 5 years shall be subject to an emission limit value for NOx of 450 mg/Nm3 For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU | ||||
| European Union | Industrial Emissions Directive | Waste gases | Combustion plants using solid or liquid fuels with the exception of gas turbines and gas engines | 400.0 mg/Nm3 | All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU | ||||
| European Union | Industrial Emissions Directive | Waste gases | Gas turbines (including combined cycle gas turbines (CCGT)) | 50.0 mg/Nm3 | All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines For gas turbines (including CCGT) the Nox and CO emission limit values set out in the table contained in this point apply only above 70 % load Gas turbines and gas engines for emergency use that operate less than 500 operating hours per year are not covered by the emission limit values set out in this point. The operator of such plants shall record the used operating hours For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU | ||||
| European Union | Industrial Emissions Directive | Waste gases | Combustion plants using solid or liquid fuels with the exception of gas turbines and gas engines | 300.0 mg/Nm3 | All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU | ||||
| European Union | Industrial Emissions Directive | Waste gases | Gas fired combustion plants with the exception of gas turbines and gas engines | 100.0 mg/Nm3 | All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU | ||||
| European Union | Industrial Emissions Directive | Waste gases | Gas engines | 100.0 mg/Nm3 | All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines Gas turbines and gas engines for emergency use that operate less than 500 operating hours per year are not covered by the emission limit values set out in this point. The operator of such plants shall record the used operating hours For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU | ||||
| European Union | Industrial Emissions Directive | Waste gases | Gas turbines (including combined cycle gas turbines (CCGT)) | 50.0 mg/Nm3 | All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines Gas turbines and gas engines for emergency use that operate less than 500 operating hours per year are not covered by the emission limit values set out in this point. The operator of such plants shall record the used operating hours For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU | ||||
| European Union | Industrial Emissions Directive | Waste gases | Gas turbines (including CCGT) | 120.0 mg/Nm3 | All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines For gas turbines (including CCGT) the Nox and CO emission limit values set out in the table contained in this point apply only above 70 % load For gas turbines (including CCGT) which were granted a permit before 27 November 2002 or the operators of which had submitted a complete application for a permit before that date provided that the plant was put into operation no later than 27 November 2003 and which do not operate more than 1 500 operating hours per year as a rolling average over a period of 5 years the emission limit value for NOx is 150 mg/Nm3 when firing natural gas and 200 mg/Nm 3 when firing other gases or liquid fuels Gas turbines and gas engines for emergency use that operate less than 500 operating hours per year are not covered by the emission limit values set out in this point. The operator of such plants shall record the used operating hours For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU | ||||
| European Union | Industrial Emissions Directive | Waste gases | Combustion plants using solid or liquid fuels with the exception of gas turbines and gas engines | 100.0 mg/Nm3 | All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU | ||||
| European Union | Industrial Emissions Directive | Waste gases | Gas turbines (including CCGT) | 50.0 mg/Nm3 | All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines 75 mg/Nm3 in the following cases where the efficiency of the gas turbine is determined at ISO base load conditions: (i) gas turbines used in combined heat and power systems having an overall efficiency greater than 75 %; (ii) gas turbines used in combined cycle plants having an annual average overall electrical efficiency greater than 55 %; (iii) gas turbines for mechanical drives For single cycle gas turbines not falling into any of the categories mentioned under note (2) but having an efficiency greater than 35 % - determined at ISO base load conditions - the emission limit value for NO x shall be 50xɳ/35 where ɳ is the gas turbine efficiency at ISO base load conditions expressed as a percentage Natural gas is naturally occurring methane with not more than 20 % (by volume) of inerts and other constituents For gas turbines (including CCGT) the Nox and CO emission limit values set out in the table contained in this point apply only above 70 % load For gas turbines (including CCGT) which were granted a permit before 27 November 2002 or the operators of which had submitted a complete application for a permit before that date provided that the plant was put into operation no later than 27 November 2003 and which do not operate more than 1 500 operating hours per year as a rolling average over a period of 5 years the emission limit value for NOx is 150 mg/Nm3 when firing natural gas and 200 mg/Nm 3 when firing other gases or liquid fuels Gas turbines and gas engines for emergency use that operate less than 500 operating hours per year are not covered by the emission limit values set out in this point. The operator of such plants shall record the used operating hours For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU | ||||
| European Union | Industrial Emissions Directive | Waste gases | Combustion plants using solid or liquid fuels with the exception of gas turbines and gas engines | 150.0 mg/Nm3 | All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU | ||||
| European Union | Industrial Emissions Directive | Waste gases | Gas fired combustion plants with the exception of gas turbines and gas engines | 200.0 mg/Nm3 | All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines 300 mg/Nm3 for such combustion plants with a total rated thermal input not exceeding 500 MW which were granted a permit before 27 November 2002 or the operators of which had submitted a complete application for a permit before that date provided that the plant was put into operation no later than 27 November 2003 For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU | ||||
| European Union | Industrial Emissions Directive | Waste gases | Combustion plants using solid or liquid fuels with the exception of gas turbines and gas engines | 300.0 mg/Nm3 | All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU | ||||
| European Union | Industrial Emissions Directive | Waste gases | Gas fired combustion plants with the exception of gas turbines and gas engines | 200.0 mg/Nm3 | All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines 300 mg/Nm3 for such combustion plants with a total rated thermal input not exceeding 500 MW which were granted a permit before 27 November 2002 or the operators of which had submitted a complete application for a permit before that date provided that the plant was put into operation no later than 27 November 2003 For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU | ||||
| European Union | Industrial Emissions Directive | Waste gases | Combustion plants using solid or liquid fuels with the exception of gas turbines and gas engines | 150.0 mg/Nm3 | All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU | ||||
| European Union | Industrial Emissions Directive | Waste gases | Gas fired combustion plants with the exception of gas turbines and gas engines | 100.0 mg/Nm3 | All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU | ||||
| European Union | Industrial Emissions Directive | Waste gases | Combustion plants using solid or liquid fuels with the exception of gas turbines and gas engines | 200.0 mg/Nm3 | All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU | ||||
| European Union | Industrial Emissions Directive | Waste gases | Gas turbines (including combined cycle gas turbines (CCGT)) | 90.0 mg/Nm3 | All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU | ||||
| European Union | Industrial Emissions Directive | Waste gases | Combustion plants using solid or liquid fuels with the exception of gas turbines and gas engines | 150.0 mg/Nm3 | All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines The emission limit value is 450 mg/Nm3 for the firing of distillation and conversion residues from the refining of crude-oil for own consumption in combustion plants with a total rated thermal input not exceeding 500 MW which were granted a permit before 27 November 2002 or the operators of which had submitted a complete application for a permit before that date provided that the plant was put into operation no later than 27 November 2003 Combustion plants in chemical installations using liquid production residues as non-commercial fuel for own consumption with a total rated thermal input not exceeding 500 MW which were granted a permit before 27 November 2002 or the operators of which had submitted a complete application for a permit before that date provided that the plant was put into operation no later than 27 November 2003 shall be subject to an emission limit value for NOx of 450 mg/Nm3 Combustion plants using solid or liquid fuels with a total rated thermal input not exceeding 500 MW which were granted a permit before 27 Nov 2002 or the operators of which had submitted a complete application for a permit before that date provided that the plant was put into operation no later than 27 Nov 2003 and which do not operate more than 1 500 operating hours per year as a rolling average over a period of 5 years shall be subject to an emission limit value for NOx of 450 mg/Nm3 Combustion plants using liquid fuels with a total rated thermal input greater than 500 MW which were granted a permit before 27 November 2002 or the operators of which had submitted a complete application for a permit before that date provided that the plant was put into operation no later than 27 November 2003 and which do not operate more than 1 500 operating hours per year as a rolling average over a period of 5 years shall be subject to an emission limit value for NOx of 400 mg/Nm3 For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU | ||||
| European Union | Industrial Emissions Directive | Waste gases | Combustion plants using solid or liquid fuels with the exception of gas turbines and gas engines | 200.0 mg/Nm3 | All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines The emission limit value is 450 mg/Nm3 for the firing of distillation and conversion residues from the refining of crude-oil for own consumption in combustion plants with a total rated thermal input not exceeding 500 MW which were granted a permit before 27 November 2002 or the operators of which had submitted a complete application for a permit before that date provided that the plant was put into operation no later than 27 November 2003 Combustion plants in chemical installations using liquid production residues as non-commercial fuel for own consumption with a total rated thermal input not exceeding 500 MW which were granted a permit before 27 November 2002 or the operators of which had submitted a complete application for a permit before that date provided that the plant was put into operation no later than 27 November 2003 shall be subject to an emission limit value for NOx of 450 mg/Nm3 Combustion plants using solid or liquid fuels with a total rated thermal input not exceeding 500 MW which were granted a permit before 27 Nov 2002 or the operators of which had submitted a complete application for a permit before that date provided that the plant was put into operation no later than 27 Nov 2003 and which do not operate more than 1 500 operating hours per year as a rolling average over a period of 5 years shall be subject to an emission limit value for NOx of 450 mg/Nm3 Combustion plants using liquid fuels with a total rated thermal input greater than 500 MW which were granted a permit before 27 November 2002 or the operators of which had submitted a complete application for a permit before that date provided that the plant was put into operation no later than 27 November 2003 and which do not operate more than 1 500 operating hours per year as a rolling average over a period of 5 years shall be subject to an emission limit value for NOx of 400 mg/Nm3 For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU | ||||
| European Union | Industrial Emissions Directive | Waste gases | Combustion plants using solid or liquid fuels with the exception of gas turbines and gas engines | 450.0 mg/Nm3 | All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines Combustion plants in chemical installations using liquid production residues as non-commercial fuel for own consumption with a total rated thermal input not exceeding 500 MW which were granted a permit before 27 November 2002 or the operators of which had submitted a complete application for a permit before that date provided that the plant was put into operation no later than 27 November 2003 shall be subject to an emission limit value for NOx of 450 mg/Nm3 Combustion plants using solid or liquid fuels with a total rated thermal input not exceeding 500 MW which were granted a permit before 27 Nov 2002 or the operators of which had submitted a complete application for a permit before that date provided that the plant was put into operation no later than 27 Nov 2003 and which do not operate more than 1 500 operating hours per year as a rolling average over a period of 5 years shall be subject to an emission limit value for NOx of 450 mg/Nm3 Combustion plants using liquid fuels with a total rated thermal input greater than 500 MW which were granted a permit before 27 November 2002 or the operators of which had submitted a complete application for a permit before that date provided that the plant was put into operation no later than 27 November 2003 and which do not operate more than 1 500 operating hours per year as a rolling average over a period of 5 years shall be subject to an emission limit value for NOx of 400 mg/Nm3 For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU | ||||
| European Union | Industrial Emissions Directive | Waste gases | Combustion plants using solid or liquid fuels with the exception of gas turbines and gas engines | 200.0 mg/Nm3 | All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines Combustion plants using solid or liquid fuels with a total rated thermal input not exceeding 500 MW which were granted a permit before 27 Nov 2002 or the operators of which had submitted a complete application for a permit before that date provided that the plant was put into operation no later than 27 Nov 2003 and which do not operate more than 1 500 operating hours per year as a rolling average over a period of 5 years shall be subject to an emission limit value for NOx of 450 mg/Nm3 Combustion plants using solid fuels with a total rated thermal input greater than 500 MW which were granted a permit before 1 July 1987 and which do not operate more than 1 500 operating hours per year as a rolling average over a period of 5 years shall be subject to an emission limit value for NOx of 450 mg/Nm3 For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU | ||||
| European Union | Industrial Emissions Directive | Waste gases | Combustion plants using solid or liquid fuels with the exception of gas turbines and gas engines | 250.0 mg/Nm3 | All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines Combustion plants using solid or liquid fuels with a total rated thermal input not exceeding 500 MW which were granted a permit before 27 Nov 2002 or the operators of which had submitted a complete application for a permit before that date provided that the plant was put into operation no later than 27 Nov 2003 and which do not operate more than 1 500 operating hours per year as a rolling average over a period of 5 years shall be subject to an emission limit value for NOx of 450 mg/Nm3 Combustion plants using solid fuels with a total rated thermal input greater than 500 MW which were granted a permit before 1 July 1987 and which do not operate more than 1 500 operating hours per year as a rolling average over a period of 5 years shall be subject to an emission limit value for NOx of 450 mg/Nm3 For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU | ||||
| European Union | Industrial Emissions Directive | Waste gases | Combustion plants using solid or liquid fuels with the exception of gas turbines and gas engines | 300.0 mg/Nm3 | All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines Combustion plants using solid or liquid fuels with a total rated thermal input not exceeding 500 MW which were granted a permit before 27 Nov 2002 or the operators of which had submitted a complete application for a permit before that date provided that the plant was put into operation no later than 27 Nov 2003 and which do not operate more than 1 500 operating hours per year as a rolling average over a period of 5 years shall be subject to an emission limit value for NOx of 450 mg/Nm3 Combustion plants using solid fuels with a total rated thermal input greater than 500 MW which were granted a permit before 1 July 1987 and which do not operate more than 1 500 operating hours per year as a rolling average over a period of 5 years shall be subject to an emission limit value for NOx of 450 mg/Nm3 For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU | ||||
| European Union | Industrial Emissions Directive | Waste gases | Combustion plants using solid or liquid fuels with the exception of gas turbines and gas engines | 200.0 mg/Nm3 | All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines Combustion plants using solid or liquid fuels with a total rated thermal input not exceeding 500 MW which were granted a permit before 27 Nov 2002 or the operators of which had submitted a complete application for a permit before that date provided that the plant was put into operation no later than 27 Nov 2003 and which do not operate more than 1 500 operating hours per year as a rolling average over a period of 5 years shall be subject to an emission limit value for NOx of 450 mg/Nm3 Combustion plants using solid fuels with a total rated thermal input greater than 500 MW which were granted a permit before 1 July 1987 and which do not operate more than 1 500 operating hours per year as a rolling average over a period of 5 years shall be subject to an emission limit value for NOx of 450 mg/Nm3 For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU | ||||
| European Union | Industrial Emissions Directive | Waste gases | Combustion plants co-incinerating waste | 250.0 mg/Nm3 | 1.0 d | All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correcting for the water vapour content of the waste gases O2 content 6% | |||
| European Union | Industrial Emissions Directive | Waste gases | Combustion plants co-incinerating waste | 200.0 mg/Nm3 | 1.0 d | All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correcting for the water vapour content of the waste gases O2 content 6% | |||
| European Union | Industrial Emissions Directive | Waste gases | Combustion plants co-incinerating waste | 150.0 mg/Nm3 | 1.0 d | All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correcting for the water vapour content of the waste gases O2 content 6% | |||
| European Union | Industrial Emissions Directive | Waste gases | Combustion plants co-incinerating waste | 200.0 mg/Nm3 | 1.0 d | All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correcting for the water vapour content of the waste gases O2 content 6% | |||
| European Union | Industrial Emissions Directive | Waste gases | Combustion plants co-incinerating waste | 150.0 mg/Nm3 | 1.0 d | All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correcting for the water vapour content of the waste gases O2 content 6% | |||
| European Union | Industrial Emissions Directive | Waste gases | Combustion plants co-incinerating waste | 150.0 mg/Nm3 | 1.0 d | All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correcting for the water vapour content of the waste gases O2 content 3% | |||
| European Union | Industrial Emissions Directive | Waste gases | Combustion plants co-incinerating waste | 300.0 mg/Nm3 | 1.0 d | All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correcting for the water vapour content of the waste gases O2 content 3% | |||
| European Union | Industrial Emissions Directive | Waste gases | Combustion plants co-incinerating waste | 200.0 mg/Nm3 | 1.0 d | All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correcting for the water vapour content of the waste gases O2 content 6% | |||
| European Union | Industrial Emissions Directive | Waste gases | Combustion plants co-incinerating waste | 100.0 mg/Nm3 | 1.0 d | All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correcting for the water vapour content of the waste gases O2 content 3% | |||
| European Union | Industrial Emissions Directive | Waste gases | Combustion plants co-incinerating waste | 300.0 mg/Nm3 | 1.0 d | All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correcting for the water vapour content of the waste gases O2 content 6% | |||
| European Union | Industrial Emissions Directive | Waste gases | Combustion plants co-incinerating waste | 200.0 mg/Nm3 | 1.0 d | All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correcting for the water vapour content of the waste gases O2 content 6% | |||
| European Union | Industrial Emissions Directive | Waste gases | Combustion plants co-incinerating waste | 250.0 mg/Nm3 | 1.0 d | All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correcting for the water vapour content of the waste gases O2 content 6% | |||
| European Union | Industrial Emissions Directive | Waste gases | Combustion plants co-incinerating waste | 400.0 mg/Nm3 | 1.0 d | All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correcting for the water vapour content of the waste gases O2 content 6% | |||
| European Union | Industrial Emissions Directive | Waste gases | Combustion plants co-incinerating waste | 300.0 mg/Nm3 | 1.0 d | All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correcting for the water vapour content of the waste gases O2 content 6% | |||
| European Union | Industrial Emissions Directive | Waste gases | Combustion plants co-incinerating waste | 150.0 mg/Nm3 | 1.0 d | All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correcting for the water vapour content of the waste gases O2 content 3% | |||
| European Union | Industrial Emissions Directive | Waste gases | Combustion plants co-incinerating waste | 300.0 mg/Nm3 | 1.0 d | All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correcting for the water vapour content of the waste gases O2 content 6% | |||
| European Union | Industrial Emissions Directive | Waste gases | Cement kilns co-incinerating waste | 500.0 mg/Nm3 | 1.0 d | All values are standardised at 10 % oxygen Until 1 January 2016 the competent authority may authorise exemptions from the limit value for NOx for Lepol kilns and long rotary kilns provided that the permit sets a total emission limit value for NO x of not more than 800 mg/Nm3 All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correcting for the water vapour content of the waste gases For technical provisions regarding 'Monitoring of emissions' see Part 6 (Annex VI). For 'Formula to calculate the emission concentration at the standard percentage oxygen concentration' see Part 7 (Annex VI). For 'Assessment of compliance with emission limit values' see Part 8 (Annex VI) Directive 2010/75/EU | |||
-
IPPC, Annexes V, VI, VIII - Provisions relating to industrial plantsEU. Emission Limit Values: Annexes V (combustion plants), VI (waste incineration/co-incineration plants), VIII (TiO2 installations), Dir. 2010/75/EU on Industrial Emissions (IPPC), 17 December 2010
This list contains emission limit values for polluting substances in waste gases and waste water, assigned according to facility type (i.e., combustion plants (Annex V), waste incineration/co-incineration plants (Annex VI), and installations producing titanium dioxide (Annex VIII)), under Directive 2010/75/EU on Industrial Emissions (Integrated Pollution Prevention and Control - IPPC). For this list, if a substance presents 2 values in the ''Average sampling duration'' field, these indicate minimum and maximum average sampling period.
