Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

Emergency measure - Inhalation: Move to fresh air. Seek medical attention if you feel unwell

or if exposure prolonged.

Emergency measure - Eyes: Rinse immediately with plenty of water for at least 10

minutes taking care to wash under the eyelids. Seek medical

attention.

Emergency measure - Skin: Remove contaminated clothing. Wash affected skin with soap

and plenty of water.

Emergency measure - Ingestion: Affected person should drink 500 - 800 ml water, if possible

with suspended activated carbon for medical use. In case of

spontaneous vomiting be sure that vomitus can freely drain

because of danger of suffocation. Give water repeatedly.

Never induce vomiting or give anything by mouth if the

victim is unconsious or having convulsions. Seek medical

attention.

Fire-fighting measures

Recommended extinguishing agent: carbon dioxide, foam, dry powder, water spray

Product arising from burning: Carbon oxides, toxic gases/vapours

Product determined by test: N

Protective equipment: Full protective clothing. Wear a self-contained breathing

apparatus.

Accidental release measures

Emergency measures in case of spillage: Dam in leaked liquid with suitable material (e.g. earth).

Take up using liquid-binding material, e.g. kieselguhr. Pump

off larger quantities into suitable containers. Dispose of

in containers labelled ac-cording to the regulations.

Observe local official regulations.

Do not discharge into drains/surface waters/groundwater.

While taking up the substance, prevent skin and eye contact

as well as inhalation of it. For this pur-pose, wear the

personal protective equipment described under "handling".

Do not discharge into drains/surface waters/groundwater.

Handling and storage

Handling: All working methods must always be designed so that exposure

by inhalation of the substance and by skin contact is

minimized. Closed or at least splashproof equipment should

be used during filling, transfer and metered feeding as well

as during sampling. In the case of handling in open systems,

any dust/vapours/aerosols that can form must be extracted

directly at the point of origin. The extracted air should

only be returned to the work area after adequate cleaning

using tested equipment. If technical extraction or

ventilation measures are not possible or are insufficient,

respiratory protection (e.g. bei offener Handhabung:

Schürze, Chemikalienschutzhandschuhe und Halbmaske mit

Staubfilter P3 oder Vollmaske mit Filter ABEK-P3) should

be worn. To avoid skin contact, tested protective gloves

(e.g. Durchbruchzeit >= 120 min nach EN 374 / ASTM F 739:

Butylkautschuk / IR (>= 0.5 mm); Polychloropren /

CR (>= 0.5 mm); Nitrilkautschuk / NBR (>= 0.5 mm) and

suitable protective clothing (e.g. :::) must be worn.

Adequate washing facilities should be available in the

immediate vicinity of the work area. After skin contact, the

affected parts of the skin should be cleaned thoroughly

using (sofort mit viel Wasser und Seife abwaschen oder

duschen). Special skin-protection and skin-care measures

are recommended. A skin-protection plan should be drawn up.

Outdoor clothing should be kept separate from working

clothes.

Do not eat, drink or smoke at the workplace.

Storage: For the storage the original packaging drums or other

unbreakable and correctly labelled containers are to be

used. Keep containers tightly closed in a dry, cool and well

ventilated place and secure by suitable measures against

falling down. Avoid product residues on the packing drums.

Packaging of the substance and or preparation: Iso-container.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

Shippingopen allclose all
Special provisions / remarks
Remarks:
Transport code: UN-Nr. 3077
Transport: For the internal transportation:

Use original containers or other unbreakable and correctly
labelled containers. Keep containers tightly closed and
secure by suitable measures against falling down


Land transport

ADR/RID: Class: 9, Verp. Gr. III

Technical name: (DIMETHYLETHYL-4-HYDROXY-

BENZENEPROPANOIC ACID METHYL ESTER)
Hazard Identification

Number: 90

Proper shipping name: Environmentally hazardous substance,

solid, n.o.s.

Sea transport (IMDG):

Class: 9
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: Not known.

Chemical reaction with water: Hydrolyses slowly.

Dust explosion: Substance is manufactured and used in a liquid formulation.

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: Not possible.

Industry - Possibility of neutralisation: Not possible.

Industry - Possibility of destruction: controlled discharge: None.

Industry - Possibility of destruction - incineration: Incinerate, not specified.

Industry - Possibility of destruction - water purification: None.

Industry - Possibility of destruction - other: None.

Public at large - Possibility of recovery/recycling: Not applicable.