Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

If inhaled: Move to fresh air. Call a physician if symptoms develop or persist.

If on skin: Get medical attention if irritation develops and persists. Flush skin thoroughly with water.

If in eyes: Rinse with water. Get medical attention if irritation develops and persists.

If swallowed: Get medical advice/attention if you feel unwell.

Most important symptoms/effects, acute and delayed: Direct contact with eyes may cause temporary irritation.

Notes to physician: Treat symptomatically.

Fire-fighting measures

Extinguishing media:  Water fog. Foam. Dry chemical powder. Carbon dioxide (CO2).

Extinguishing media to avoid: Straight streams of water as this may spread the fire.

Specific hazards during fire: Gases hazardous to health may be formed. Fire may produce irritating, corrosive and/or toxic gases.

Special fire fighting procedures: In the event of fire, cool tanks with water spray.

Protection of fire-fighters: Self-contained breathing apparatus and full protective clothing must be worn in case of fire.

Accidental release measures

Personal precautions, protective equipment and emergency procedures:

For non-emergency personnel:

Wear appropriate protective equipment and clothing during clean-up. Avoid inhalation of dust from the spilled material. Wear a dust mask if dust is generated above exposure limits. Ensure adequate ventilation. Avoid contact with skin and eyes.

For emergency responders:

Not available.

Environmental precautions:

Prevent further leakage or spillage if safe to do so. Avoid release to the environment. Avoid discharge into drains, water courses or onto the ground. Contact local authorities in case of spillage to drain/aquatic environment.

Methods and material for containment and cleaning up:

Extinguish all flames in the vicinity. Dike the spilled material, where this is possible. If sweeping of a contaminated area is necessary use a dust suppressant agent which does not react with the product. Sweep up or vacuum up spillage and collect in suitable container for disposal. Collect dust

using a vacuum cleaner equipped with HEPA filter. Avoid the generation of dusts during clean-up. Following product recovery, flush area with water. Prevent entry into waterways, sewer, basements or confined areas. Never return spills in original containers for re-use.

Handling and storage


Technical measures (e.g.Local and general ventilation): Provide adequate ventilation. Chemical showers, hand and eye washing facilities near the workplace are recommended.

Safe handling advice: Use care in handling/storage.

Hygiene measures: Always observe good personal hygiene measures, such as washing after handling the material and before eating, drinking, and/or smoking. Routinely wash work clothing and protective equipment to remove contaminants.


Safe storage conditions:  Keep out of the reach of children.

Safe packaging materials: Use appropriate container to avoid environmental contamination.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
Not regulated for transport.
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
Not regulated for transport.
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
Not regulated for transport.
Shippingopen allclose all
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
Not regulated for transport.
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Exposure controls:

Occupational exposure limits: No exposure limits noted for ingredient(s).

Engineering measures: Mechanical ventilation or local exhaust ventilation is required. Provide sufficient ventilation for operations causing dust formation.

Personal protective equipment:

Respiratory protection Dust and mist respirator.

Hand protection Use protective gloves. Wash promptly with soap and water if skin becomes contaminated.

Eye protection Eye contact MUST be prevented by means of suitable personal protection equipment.

Skin and body protection Wear suitable protective clothing.

Stability and reactivity

Reactivity: Stable and non-reactive under normal conditions of use, storage and transport.

Chemical stability: Stable under normal conditions.

Possibility of hazardous reactions: No dangerous reaction known under conditions of normal use.

Conditions to avoid: Contact with incompatible materials.

Incompatible materials: Avoid contact with oxidisers or reducing agents.

Hazardous decomposition products: Carbon dioxide, carbon monoxide, oxides of sulfur and nitrogen.

Disposal considerations

Residual waste: Dispose of in accordance with local regulations. Empty containers or liners may retain some product residues. This material and its container must be disposed of in a safe manner.

Contaminated packaging: Empty containers should be taken to an approved waste handling site for recycling or disposal.

Local disposal regulations: Contract with a disposal operator licensed by the Law on Disposal and Cleaning. When an on-site wastewater treatment plant is not available, collect entire waste and then charge to a licensed industrial waste management professional with manifests for industrial waste.