Registration Dossier

Diss Factsheets

Administrative data

First-aid measures

Inhalation: Move victim to fresh air. If not breathing, give artificial respiration. Get medical attention.

Skin contact: Immediately wash with plenty of soap and water. Get medical attention if irritation occurs.

Eye contact: Immediately flush eyes with running water for at least 20 minutes holding eyelids open. Get medical attention.

Ingestion: Do not induce vomiting. Give 1-2 glasses of water to a conscious victim. Never give anything by mouth to an unconscious victim. Get medical attention.

Advice for the doctor: Symptomatic treatment.

Fire-fighting measures

Suitable extinguishing media:

Foam.

Dry chemical powder.

Carbon dioxide.

BCF(Where regulations permit)

Accidental release measures

Wear suitable protective equipment.

Remove ignition sources and provision of sufficient ventilation, evacuate the danger area and consult experts.

Take precautions to prevent entry into waterways, sewers, or surface drainage systems. Dispose according to local or international regulations.

Use appropriate tools to put the spilled solid in suitable container for recovery or disposal, avoid splashing.

Personal Protective Equipment advice is contained in Section 8 of the MSDS

Handling and storage

Avoid ingestion, inhalation, skin and eye contact. Minimize spill and splashing. Handle in accordance with good industrial hygiene practice and any legal requirements.

Suitable container: Check all containers are clearly labelled and free from leaks.

Storage incompatibility: Avoid reaction with strong acid, alkali and oxidizing agents.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Appropriate engineering controls Use: process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure limits.

General Personal Protection: Safety goggles or face shield, protective chemical resistant gloves, protective clothing.

Stability and reactivity

Suitable container: Check all containers are clearly labelled and free from leaks.

Storage incompatibility: Avoid reaction with strong acid, alkali and oxidizing agents.

Disposal considerations

Product disposal: Observe specific national regulation.

Contaminated packaging: Contaminated, empty containers must be disposed of as chemical waste.