Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

Description of first aid measures

Remove contaminated or saturated clothing.

Inhalation

Following inhalation of aerosols or mist:

Move victims into fresh air.

If symptoms persist, consult a physician for treatment.

Skin contact

Wash off immediately with plenty of water.

Consult a doctor in the event of permanent skin irritation.

Eye contact

Keeping eyelid open, immediately rinse thoroughly for at least 5 minutes using plenty of water or, if necessary, eye rinsing solution.

In case of persistent discomfort: Consult an ophthalmologist.

Ingestion

Have the mouth rinsed with water.

Have patient drink plenty of water in small sips.

Consult a physician immediately.

Most important symptoms and effects, both acute and delayed

Symptoms

None known

Hazards

None known

Indication of any immediate medical attention and special treatment needed

If required, therapy of irritative effect.

After absorbing large amounts of substance:

administration of activated charcoal.

Acceleration of gastrointestinal passage

Fire-fighting measures

Suitable extinguishing media

foam, water spray, CO2, dry powder

Advice for firefighters

Water used to extinguish fire should not enter drainage systems, soil or stretches of water.

Ensure there are sufficient retaining facilities for water used to extinguish fire.

Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations.

Accidental release measures

Personal precautions, protective equipment and emergency procedures

Use personal protective equipment.

Environmental precautions

Do not allow entrance in sewage water, soil stretches of water, groundwater, drainage systems.

Methods and material for containment and cleaning up

Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust).

Fill into marked, sealable containers.

To be disposed of in compliance with existing regulations.

Suitable binder:       sand (for damming up), sawdust, universal absorbent

Handling and storage

Handling

Precautions for safe handling

Application, processing: Provide sufficient ventilation.

Advice on protection against fire and explosion

Take precautionary measures against static discharges.

Keep away from sources of ignition - No smoking.

When repairs of the production system are to be made (e.g. welding work), the section to be repaired must be essentially free of product.

Storage

Conditions for safe storage, including any incompatibilities

Keep containers tightly closed in a cool, well-ventilated place.

Protect from moisture

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
1993
Shippingopen allclose all
Labels:
ADR/RID-Labels : 3
Tunnel Restriction Code (ADR): (D/E)

SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
1993
Shippingopen allclose all
Labels:
ADR/RID-Labels: 3
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
1993
Shipping information
Proper shipping name and description:
Proper technical name (Proper shipping name)
FLAMMABLE LIQUID, N.O.S. (Propyltriethoxysilane)
Chemical name:
triethoxypropylsilane
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
1993
Shipping information
Proper shipping name and description:
Proper technical name (Proper shipping name)
FLAMMABLE LIQUID, N.O.S. (Propyltriethoxysilane)
Chemical name:
triethoxypropylsilane
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Control parameters

Engineering measures

Provide adequate ventilation.

Personal protective equipment

Respiratory protection

In case of dusts/vapours/aerosols being formed or if the limit values like TLV are exceeded:

use respiratory equipment with suitable filter (filter type ABEK) or wear a self contained respiratory apparatus

Use only respiratory protection equipment with CE-symbol including four digit test number.

The filter class for the respirator must be suitable for the maximum expected contaminant concentration (gas/vapour/aerosol/particulates) that may arise when handling the product. If this concentration is exceeded, self-contained breathing apparatus must be used.

Note time limit for wearing respiratory protective equipment.

Hand protection

Glove material       for example, butyl-rubber

Material thickness       0,5 mm

Break through time       >= 480 min

Glove material       for example, Fluorinated rubber (Viton)

Material thickness       0,4 mm

Break through time       >= 480 min

Selection of protective gloves to meet the requirements of specific workplaces.

Suitability for specific workplaces should be clarified with protective glove manufacturers.

The information is based on our own tests, references from the literature and information from glove manufacturers, or derived by analogy with similar materials.

Please observe that the daily duration of usage of a chemical protective glove is in practice far shorter due to the many influencing factors (e.g. temperature, mechanical strain on the glove material) than the permeation time determined acc. EN 374.

Eye protection

safety glasses

Skin and body protection

Wear protective clothing made from non-flammable fibres.

Hygiene measures

When using, do not eat, drink or smoke. Wash face and/or hands before break and end of work.

Remove contaminated or saturated clothing.

Wash contaminated clothing before re-use.

Protective measures

Handle in accordance with good industrial hygiene and safety practices.

It should be defined in the work place in the form of a risk analysis according to directive 89/686/EEC and amendments.

If workplace exposure limits are exceeded and/or larger amounts are released (leakage, spilling, dust) the indicated respiratory protection should be used.

If there is the possibility of skin/eye contact, the indicated hand/eye/body protection should be used.

Do not breathe in vapours or aerosols.

Avoid contact with skin and eyes.

Stability and reactivity

Possibility of hazardous reactions

No dangerous reactions known.

Conditions to avoid

Keep away from heat and sources of ignition.

Vapours can form explosive mixtures with air.

Hazardous decomposition products

Ethanol in case of hydrolysis

Disposal considerations

Product

With respect to local regulations, e.g. dispose of to suitable waste incineration plant.

Uncleaned packaging

Do not reuse empty containers and dispose of in accordance with the regulations issued by the appropriate local authorities.

If there is product residue in the emptied container, follow directions for handling on the container's label.

Incorrect disposal or reuse of this container is illegal and can be dangerous.

Other countries: observe the national regulations.

Waste Key Number

No waste key number as per the European Waste Types List can be assigned to this product, since such classification is based on the (as yet undetermined) use to which the product is put by the consumer.

The waste key number must be determined as per the European Waste Types List (decision on EU Waste Types List 2000/532/EC) in cooperation with the disposal firm / producing firm / official authority.