Registration Dossier
Registration Dossier
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 471-150-6 | CAS number: 191605-10-4
Guidance on Safe Use
Administrative data
First-aid measures
immediately.
Emergency measure - Eyes: In case of contact with eyes rinse thoroughly with plenty of
water and seek medical advice.
Emergency measure - Skin: In case of contact with skin wash off immediately with
plenty of water.
Emergency measure - Ingestion: When swallowed seek medical aid immediately and show the
physician the packaging or the label of the packaging.
Fire-fighting measures
Product arising from burning: Carbon monoxide, carbon dioxide.
Product determined by test: N
Protective equipment: Use self-contained breathing apparatus.
Accidental release measures
not allow to enter drains or waterways. Take up
mechanically. Clean contaminated floors and objects
thoroughly, observing environmental regulations. When picked
up, treat material as prescribed under heading "Disposal".
Handling and storage
ventilation if dust is formed. Take precautionary measures
against electrostatic loading. Observe the general rules of
industrial fire protection.
General protective measures: do not inhale dust. Avoid
contact with eyes and skin.
Hygiene measures: do not eat, drink or smoke during work
time. Keep away from foodstuffs and beverages. After
worktime and during work intervals the affected skin areas
must be thoroughly cleaned.
Respiratory protection: particle filter half mask,
filter P1.
Hand protection: nitrile rubber gloves.
Glove material: Dermatril« (KCL); Layer thickness: 0,11 mm;
Breakthrough time: > 480 min.
Glove material: nitrile rubber; Layer thickness: 0,5 mm;
Breakthrough time: > 480 min.
Eye protection: safety glasses with side protection shield.
Body protection: protective clothing.
Concentration limits in air:
OEB-Category : OEB 3 (preliminary).
Storage: Keep only in the original container. Keep container tightly
closed and dry.
Storge class 13: non-combustible solids.
Packaging of the substance and or preparation: Fibreboard drum with PE-liner.
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
Shippingopen allclose all
Special provisions / remarks
- Remarks:
- Transport: Non-hazardous good.
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Stability and reactivity
Chemical reaction with water: None.
Dust explosion: The product is capable of dust expolsions.
Dust explosion determined by test: N
Disposal considerations
floors and objects thoroughly, observing environmental
regulations.
Industry - Possibility of neutralisation: Incinerate at high temperature - long burn.
Industry - Possibility of destruction: controlled discharge: Incinerate at high temperatures - long burn.
Industry - Possibility of destruction - incineration: Incinerate at high temperatures - long burn.
Industry - Possibility of destruction - water purification: Do not allow to enter drain or waste water.
Industry - Possibility of destruction - other: None.
Public at large - Possibility of recovery/recycling: Not applicable.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
