Sodium O-isobutyl dithiocarbonate

Hydrolysis

Link to relevant study record(s)

Reference

Reference 1

Endpoint:

hydrolysis

Data waiving:

other justification

Justification for data waiving:

other:

Reference 2

Endpoint:

hydrolysis

Type of information:

experimental study

Adequacy of study:

weight of evidence

Reliability:

2 (reliable with restrictions)

Rationale for reliability incl. deficiencies:

comparable to guideline study with acceptable restrictions

Qualifier:

according to guideline

Guideline:

OECD Guideline 111 (Hydrolysis as a Function of pH)

GLP compliance:

not specified

Radiolabelling:

no

Analytical monitoring:

not specified

Preliminary study:

Hydrolysis will be a significant factor in determining the environmental fate of f SIBX. In neutral or mildly alkaline solutions, SIBX decomposes to the alcohol, carbon disulphide, sodium carbonate and sodium trithiocarbonate, the two salts arising from neutralisation of carbondisulphide with the sodium hydroxide liberated. In more strongly alkaline media, hydrogen sulphide is liberated. However, strongly alkaline conditions are unlikely to be encountered under the conditions of use in the mining industry. The half-life at pH 7 at 25°C is reportedly about 260 hours, increasing to over 500 hours in the pH range 8 to 11.
SIBX is hydrolytically unstable when exposed to acidic conditions, reverting rapidly to ethanol, carbon disulphide and caustic soda, and therefore will not persist in the acidic environment of tailings dams. If discharged to waterways, the chemical would be likely to persist for at least some days, hydrolysing only slowly in this more neutral environment. However, it is not expected to bioaccumulate in view of its ionic character.

Transformation products:

yes

No.:

#1

No.:

#2

No.:

#3

No.:

#4

Details on hydrolysis and appearance of transformation product(s):

In neutral and alkaline media, xanthates decompose by hydrolytic decomposition.
6ROCS–2 + 3H2O →6ROH + CO3 2 – + 3CS2 + 2CS3 2 –
Further hydrolysis of sodium trithiocarbonate to sodium carbonate and hydrogen sulphide and carbon disulphide to carbon dioxide and hydrogen sulphide may occur. The reaction is catalysed by the alcohol formed from the xanthic acid and is self accelerating.

Reaction is the main reaction in alkaline solution while A and B occur in acidic solutions. During use in mining processes, reaction C is the principal decomposition pathway and carbon disulphide the principal decomposition product.
Part of the carbon disulphide formed may decompose further to carbonate and thiocarbonate salts, some of it may evaporate and some may build up in the xanthate solution. Once the solubility of carbon disulphide is exceeded it forms a separate layer below the sodium ethyl xanthate solution.
Reactions A and B are minor and require acidic conditions. Reaction C proceeds in neutral or alkaline pH and is self-accelerating, as it is catalysed by the alcohol formed as a product. Its rate increases with concentration of the reagents and with temperature, from 1.1%/day at 20 °C to 4.6%/day at 40 °C for a 10% solution at pH=10. A decrease in pH from 10 to 6.5 increases the decomposition rate from 1.1%/day to 16%/day. Decomposition is also accelerated by the presence of metals, such as copper, iron, lead or zinc, which act as a catalyst

pH:

7

Temp.:

25 °C

DT50:

260 h

Type:

other: abiotic

pH:

11

Temp.:

25 °C

DT50:

500 h

Type:

other: abiotic

Details on results:

Hydrolysis will be a significant factor in determining the environmental fate of Reaction mass of SIBX. In neutral or mildly alkaline solutions, SIBX decomposes to the alcohol, carbon disulphide, sodium carbonate and sodium trithiocarbonate, the two salts arising from neutralisation of carbondisulphide with the sodium hydroxide liberated. In more strongly alkaline media, hydrogen sulphide is liberated. However, strongly alkaline conditions are unlikely to be encountered under the conditions of use in the mining industry. The half-life at pH 7 at 25°C is reportedly about 260 hours, increasing to over 500 hours in the pH range 8 to 11.

Validity criteria fulfilled:

yes

Conclusions:

The half-life at pH 7 at 25°C is reportedly about 260 hours, increasing to over 500 hours in the pH range 8 to 11

Executive summary:

Hydrolysis will be a significant factor in determining the environmental fate of SIBX. In neutral or mildly alkaline solutions, SIBX decomposes to the alcohol, carbon disulphide, sodium carbonate and sodium trithiocarbonate, the two salts arising from neutralisation of carbondisulphide with the sodium hydroxide liberated. In more strongly alkaline media, hydrogen sulphide is liberated. However, strongly alkaline conditions are unlikely to be encountered under the conditions of use in the mining industry. The half-life at pH 7 at 25°C is reportedly about 260 hours, increasing to over 500 hours in the pH range 8 to 11.

SIBX is hydrolytically unstable when exposed to acidic conditions, reverting rapidly to ethanol, carbon disulphide and caustic soda, and therefore will not persist in the acidic environment of tailings dams. If discharged to waterways, the chemical would be likely to persist for at least some days, hydrolysing only slowly in this more neutral environment. However, it is not expected to bioaccumulate in view of its ionic character.

Description of key information

Hydrolysis will be a significant factor in determining the environmental fate of SIBX. In neutral or mildly alkaline solutions, Reaction mass of SIBX decomposes to the alcohol, carbon disulphide, sodium carbonate and sodium trithiocarbonate, the two salts arising from neutralisation of carbon  disulphide with the sodium hydroxide liberated. In more strongly alkaline media, hydrogen sulphide is liberated. However, strongly alkaline conditions are unlikelyto be encountered under the conditions of use in the mining industry. The half-life atpH 7 at 25°C is reportedly about 260 hours, increasing to over 500 hours in the pH range 8 to 11.
SIBX is hydrolytically unstable when exposed to acidic conditions, reverting rapidly to ethanol, carbon disulphide and caustic soda, and  therefore will not persist in the acidic environment of tailings dams. If dischargedto waterways, the chemical would be likely to persist for at least some days,hydrolysing only slowly in this more neutral environment. However, it is notexpected to bioaccumulate in view of its ionic character.

Key value for chemical safety assessment

Half-life for hydrolysis:

260 h

at the temperature of:

25 °C

Additional information

Hydrolysis will be a significant factor in determining the environmental fate of SIBX. In neutral or mildly alkaline solutions, SIBX decomposes to the alcohol, carbon disulphide, sodium carbonate and sodium trithiocarbonate, the two salts arising from neutralisation of carbondisulphide with the sodium hydroxide liberated. In more strongly alkaline media, hydrogen sulphide is liberated. However, strongly alkaline conditions are unlikely to be encountered under the conditions of use in the mining industry. The half-life at pH 7 at 25°C is reportedly about 260 hours, increasing to over 500 hours in the pH range 8 to 11.

SIBX is hydrolytically unstable when exposed to acidic conditions, reverting rapidly to alcohol, carbon disulphide and caustic soda, and therefore will not persist in the acidic environment of tailings dams. If discharged to waterways, the chemical would be likely to persist for at least some days, hydrolysing only slowly in this more neutral environment. However, it is not expected to bioaccumulate in view of its ionic character.

 

Further hydrolysis of sodium trithiocarbonate to sodium carbonate and hydrogen sulphide and carbon disulphide to carbon dioxide and hydrogen sulphide may occur. The reaction is catalysed by the alcohol formed from the xanthic acid and is self accelerating.

 

On this basis hydrolysis proceed with the others active substances:sodium trithiocarbonate,carbon disulphide,hydrogen sulphide.

 

Xanthates decompose in aqueous solution by dissociation, oxidation and hydrolysis. Hydrolytic decomposition is the main reaction in alkaline solutions while the other two reactions occur in acidic solutions.

 

Aqueous solution

There are three decomposition pathways of xanthates in aqueous solution:

A. Xanthates dissociate forming alkali metal cations and xanthate anions. Thesolution undergoes further hydrolysis to xanthic acid which decomposes intocarbon disulphide and alcohol.

ROCS2Na + H2O→ ROCS2H + NaOH

 

ROCS2H →CS2+ ROH

 

B. Xanthate is oxidised to dixanthogen. The extent of this reaction is very smalland dependent on the pH. Equilibrium is reached after about 5–10% of thexanthate is oxidised, and the reaction increases with a fall in the pH.

 

2ROCS–2+ H2O + _O2→ (ROCS2)2+ 2OH–

 

C. In neutral and alkaline media, xanthates decompose by hydrolytic decomposition.

6ROCS–2+ 3H2O →6ROH + CO32 –+ 3CS2+ 2CS32 –

Further hydrolysis of sodium trithiocarbonate to sodium carbonate andhydrogen sulphide and carbon disulphide to carbon dioxide and hydrogensulphide may occur. The reaction is catalysed by the alcohol formed from thexanthic acid and is self accelerating.

 

Reaction C is the main reaction in alkaline solution while A and B occur in acidic solutions. During use in mining processes, reaction C is the principal decompositionpathway and carbon disulphide the principal decomposition product.

Part of thecarbon disulphide formed may decompose further to carbonate and thiocarbonatesalts, some of it may evaporate and some may build up in the xanthate solution.Once the solubility of carbon disulphide is exceeded it forms a separate layer belowthe SIBX solution.

Reactions A and B are minor and require acidic conditions. Reaction C proceeds in neutral or alkaline pH and is self-accelerating, as it is catalysed by the alcohol formed as a product. Its rate increases with concentration of the reagents and with temperature, from 1.1%/day at 20 °C to 4.6%/day at 40 °C for a 10% solution at pH=10. A decrease in pH from 10 to 6.5 increases the decomposition rate from 1.1%/day to 16%/day. Decomposition is also accelerated by the presence of metals, such as copper, iron, lead or zinc, which act as a catalyst