Registration Dossier
Registration Dossier
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 629-007-2 | CAS number: 17857-14-6
Guidance on Safe Use
Administrative data
First-aid measures
Description of first aid measures:
General advice: Take the victim out of the contaminated area. Remove contaminated clothing immediately and dispose of safely.
If inhaled: Move to fresh air. Make the victim blow his nose. Seek medical advice.
In case of skin contact: Rinse immediately with plenty of water for at least 15 minutes. Seek medical advice.
In case of eye contact: Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Seek medical advice.
If swallowed: Do not induce vomiting. Make the victim rinse his mouth with water. Seek medical advice.
Most important symptoms and effects, both acute and delayed
Symptoms: Irritations.
Indication of any immediate medical attention and special treatment needed
Treatment : No data available Treat symptomatically
Fire-fighting measures
Extinguishing media:
Suitable extinguishing media : All means (e.g. water, carbon dioxide, dry chemical extinguisher).
Unsuitable extinguishing media : Strong water jet.
Special hazards arising from the substance or mixture:
In case of fire, the product may emit toxic and/or irritating fumes. Supposed thermal decomposition/oxidation:
Carbon monoxide and carbon dioxide Hydrogen bromide (HBr)
Phosphorus compounds
Advice for firefighters:
Special protective equipment for firefighters : Use self-contained breathing apparatus.
Further information : Avoid discharging extinguishing water in the environment. Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
Accidental release measures
Personal precautions, protective equipment and emergency procedures:
Particle full face respirator or powered air purifying respirator. Suitable gloves. Dedicated work clothes.
Environmental precautions:
Avoid any spreading of the product. Protect sewage.
Methods and materials for containment and cleaning up:
General advice : Avoid dust formation. Sweep and shovel the solid product into a container specially adapted for its recovery or destroying (avoiding dust formation). Close and label thoroughly.
Cleaning of contaminated zone : After cleaning up the product, rinse the polluted area with water.
Elimination of recovered materials : Deliver to the Environmental service of the factory or to any specialized and approved disposal company.
Reference to other sections:
Handling and storage
Precautions for safe handling:
Advice on safe handling (industrial scale) : Local ventilation and emission point dust extraction. Enclosed transfer recommended.
Take precautionary measures against electrostatic loading. Earth vessels and equipment well.
Advice on safe handling (laboratory scale) : Handling in a hood.
Conditions for safe storage, including any incompatibilities:
Requirements for storage areas and containers : Keep in a well-ventilated place.
Advice on common storage : Do not store with strong oxidizing agents.
Further information on storage conditions : Keep in a well closed container, away from moisture and light.
Storage temperature : Keep at ambient temperature.
Recommended packaging materials : No data available
Sensitivity
: No particular observation.
Specific end use(s):
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Control parameters: Occupational Exposure Limits:
Remarks : No data available
Exposure controls:
Personal protective equipment
(IMPORTANT: to be adapted following the workplace risk assessment.)
Industrial workplace
Respiratory protection : Particle full face mask or powered-air purifying respirator.
Hand protection : Suitable gloves.
Glove material : Nitrile rubber
Layer thickness : 0,11 mm
Break through time: > 480 min
Eye/face protection
:
See respiratory protection.
Body Protection : Dedicated working clothes recommended.
Hygiene measures : Wash hands.
Laboratory
Respiratory protection : Handling in a hood.
Hand protection : Suitable gloves.
Eye/face protection : Safety glasses.
Body Protection : Working clothes.
Hygiene measures : Wash hands.
Stability and reactivity
Safety remarks : Dust may be explosive (no data available).
Reactivity : No data available
Chemical stability : No data available
Possibility of hazardous reactions : No data available
Conditions to avoid : No data available
Incompatible materials : Strong oxidizing agents.
Hazardous decomposition products : Supposed thermal decomposition/oxidation: Carbon monoxide and carbon dioxide Hydrogen bromide (HBr)
Phosphorus compounds
Disposal considerations
Waste treatment methods:
Product : Deliver to the Environmental service of the factory or to any specialized and approved disposal service.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
