Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 608-031-7 | CAS number: 27006-83-3
Guidance on Safe Use
Administrative data
First-aid measures
General advice: Move out of dangerous area.
Consult a physician.
Show this safety data sheet to the doctor in attendance.
Do not leave the victim unattended.
If inhaled: If unconscious, place in recovery position and seek medical advice.
If symptoms persist, call a physician.
In case of skin contact: Immediate medical treatment is necessary as untreated wounds from corrosion of the skin heal slowly and with difficul-ty.
If on skin, rinse well with water.
If on clothes, remove clothes.
In case of eye contact: Small amounts splashed into eyes can cause irreversible tis-sue damage and blindness.
In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
Continue rinsing eyes during transport to hospital.
Remove contact lenses.
Protect unharmed eye.
Keep eye wide open while rinsing.
If eye irritation persists, consult a specialist.
If swallowed: Keep respiratory tract clear.
Do NOT induce vomiting.
Do not give milk or alcoholic beverages.
Never give anything by mouth to an unconscious person.
If symptoms persist, call a physician.
Take victim immediately to hospital.
Fire-fighting measures
Suitable extinguishing media: Dry powder
Carbon dioxide (CO2)
Unsuitable extinguishing media: Water
Specific hazards during fire-fighting: Do not allow run-off from fire fighting to enter drains or water courses.
Hazardous combustion products: Carbon dioxide (CO2)
Carbon monoxide
Halogenated compounds
Special protective equipment for firefighters: Wear self-contained breathing apparatus for firefighting if necessary
Further information: Collect contaminated fire extinguishing water separately. This must not be discharged into drains.
Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations.
Accidental release measures
Personal precautions: Use personal protective equipment.
Avoid dust formation.
Avoid breathing dust.
Environmental precautions: Prevent product from entering drains.
Prevent further leakage or spillage if safe to do so.
If the product contaminates rivers and lakes or drains inform respective authorities.
Methods for cleaning up: Keep in suitable, closed containers for disposal
Handling and storage
Manufacture and use of this chemical intermediate takes place under strictly controlled conditions, as described in Art. 17/18 REACH. The substance is rigorously contained during manufacturing and use and appropriate risk management measures including PPE (i.g. during charging or sampling) are applied. Occupational exposure is reduced to a minimum and well controlled by measurements. A management system covering all general aspects of a chemical production is in place, especially cleaning and maintenance of plants and equipment. An authorisation scheme based on instructions covering the whole process ensures that only trained and authorised staff handles the substance.
Advice on safe handling: Avoid formation of respirable particles.
Do not breathe vapours/dust.
Avoid contact with skin and eyes.
Dispose of rinse water in accordance with local and national regulations.
This substance should be handled under strictly controlled conditions as specified in REACH regulation article 18(4). Site documentation to support safe handling arrangements in ac-cordance with risk-based management system should be available at each manufacturing site. During the whole lifecy-cle all necessary measures should be undertaken to minimize emissions and any resulting exposure.
Advice on protection against fire and explosion: Avoid dust formation. Provide appropriate exhaust ventilation at places where dust is formed.
Hygiene measures: When using do not eat or drink. When using do not smoke. Wash hands before breaks and at the end of workday.
Requirements for storage areas and containers: Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully re-sealed and kept upright to prevent leakage. Observe label precautions. Electrical installations / working materials must comply with the technological safety standards.
Keep away from water or moist air.
Further information on storage conditions: Store in a dry place.
Advice on common storage: Do not store near acids.
Further information on storage stability: No decomposition if stored and applied as directed
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Eye protection: Tightly fitting safety goggles
Wear face-shield and protective suit for abnormal processing problems.
Hand protection
Wearing time: < 60 min
Material: Butyl rubber - IIR
Material: Viton®
Material: polyvinyl chloride (PVC)
Remarks: The suitability for a specific workplace should be discussed with the producers of the protective gloves.
After contamination with product change the gloves immedi-ately and dispose of them according to relevant national and local regulations
Skin and body protection: Complete suit protecting against chemicals
Choose body protection according to the amount and con-centration of the dangerous substance at the work place.
Respiratory protection: Vapour respirator
Filter type: ABEK-P2-filter
Wear breathing apparatus with separate air supply (com-pressed air respirator, tube apparatus) at higher concentrations.
Stability and reactivity
Reactivity: No dangerous reaction known under conditions of normal use.
Chemical stability: Stable under normal conditions.
Possibility of hazardous reactions:
Hazardous reactions: Contact with water liberates toxic gas.
Stable under recommended storage conditions.
Conditions to avoid: Contact with water or humid air
Materials to avoid: water
moisture
Hazardous decomposition products: Contact with water liberates toxic gas
Disposal considerations
Product: The product should not be allowed to enter drains, water courses or the soil.
Do not contaminate ponds, waterways or ditches with chemi-cal or used container.
Send to a licensed waste management company.
Contaminated packaging: Empty remaining contents.
Dispose of as unused product.
Do not re-use empty containers.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
