Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 229-390-2 | CAS number: 6505-30-2
Surface tension
Administrative data
Link to relevant study record(s)
- Endpoint:
- surface tension
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 115 (Surface Tension of Aqueous Solutions)
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.5 (Surface Tension)
- GLP compliance:
- yes (incl. QA statement)
- Other quality assurance:
- other: SOP-LA-051
- Remarks:
- Determination of the surafce tension of aqueous liquids
- Type of method:
- ring method
- Surface tension:
- 50.36 mN/m
- Temp.:
- 20 °C
- Conc.:
- 1 013.4 mg/L
- Remarks on result:
- other: Total mean value of two measurements.
- Conclusions:
- The test item has a mean surface tension of 50.36 mN/m at 20°C. Thus, the test item is to be regarded as surface active according to regulation EC No. 440/2008 Part A Method A.5.
- Executive summary:
According to OECD Test Guideline 115 and Regulation EC No. 440/2008 Part A Method A.5. the surface tension at 20 °C of test item Hydrogen [4-[[4-diethylamino)phenyl][4-[ethyl[(3-sulphonatobenzyl)amino]-o-tolyl]methylene]-3-methylcylohexa-2,5-dien-1-ylidene](ethyl)3-sulphonatobenzyl)ammonium, sodium salt was determined to be 50.36 mN/m
According to Regulation EC No. 440/2008 Part A Method A.5. the test item is to be regarded as surface active material.
Reference
The results of two measurements are summarized in Table 6.
Table 6: Measured surface tension values
| Value No | 1st Measurement (20 min after preparing the solution) σ [mN/m] |
2nd Measurement (35 min after preparing the solution) σ [mN/m] |
| 1 | 50.65 |
50.20 |
| 2 | 50.62 | 50.17 |
| 3 | 50.59 | 50.14 |
| 4 | 50.56 | 50.12 |
| 5 | 50.54 | 50.09 |
| 6 | 50.52 | 50.07 |
| Mean value of the individual values | 50.58 ± 0.06 | 50.13 ± 0.11 |
| Total mean values | 50.36 ± 0.23 |
|
The test item has a mean surface tension of 50.36 mN/m. Thus, the test item is to be regarded as surface active according to regulation EC No. 440/2008 Part A Method A.5.
Description of key information
The test item has a mean surface tension of 50.36 mN/m at 20°C. Thus, the test item is to be regarded as surface active according to regulation EC No. 440/2008 Part A Method A.5.
Key value for chemical safety assessment
- Surface tension:
- 50.36
- in mN/m at 20°C and concentration in mg/L:
- 1 013.4
Additional information
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
