Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 921-437-1 | CAS number: -
Guidance on Safe Use
Administrative data
First-aid measures
Ingestion: Allow victim to rest. If you feel unwell, seek medical advice.
Inhalation: Allow victim to rest. Assure fresh air breathing. if you feel unwell, seek medical advice.
Skin contact: Remove contaminated clothes for decontamination by the bottom (not to contaminate the face). Rinse the skin during at least 15 minutes with water at 15°C at 15cm. Contact a physician if redness or irritation appear.
Eye contact: Immediately rinse with clean water for 15-20 minutes, and respect this time; Avoid contaminating the healthy eye during the rinsing. contact an ophthalmologist if redness or irritation appear.
Fire-fighting measures
Extinguishing media: Carbon dioxide. Powder
Special hazards arising from the substance or mixture
Specific hazards: This product, like a products in powder form, can generate as explosion due to dust.
Hazardous combustion products: Under fire conditions, hazardous fumes will be present. COx. NOx.
Advice for fire-fighters
Protection against fire: Do not enter fire areas without proper equipment: fire clothes, boots and individual Respiratory Protection.
Accidental release measures
Personal precautions, protective equipment and emergency procedures
Advices for non-emergency personnel: Do not breathe dust.
Advices for emergency responders: Delimit the discharge area. Protective equipment not required.
Environmental precautions: No special precautions
Methods and material for contaminment and cleaning up
Clean up methods: Collect by wet sweeping (Appropriated solvent), avoiding dust production.
Special precautions: Avoid dust production
Handling and storage
Precautions for safe handling
Handling: Avoid dust production
Industrial hygiene: Wash hands after each handling. Remove the contaminated clothes. Do not drink, eat or smoke in the handling room. Inspect the individual protecton equopment after each handling. No personal objects at the work station. Avoid taking contaminated clothes home. Change clothes systematically at coffee breaks or meal times.
Storage : Store at 5 +/- 3 °C
Transport: At room temperature.
Transport information
Land transport (UN RTDG/ADR/RID)
- UN number:
- Not classified.
Shippingopen allclose all
SpecialProvisionsopen allclose all
Inland waterway transport (UN RTDG/ADN(R))
- UN number:
- Not classified.
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
- UN number:
- Not classified.
Shippingopen allclose all
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
- UN number:
- Not classified.
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Substance is handled and stored under Strictly Controlled Conditions.
Exposure controls
- Personal protective equipment:
- General protective and hygienic measures:
The usual precautionary measures are to be adhered to when handling chemicals.
Keep away from foodstuffs, beverages and feed.
Wash hands before breaks and at the end of work.
- Respiratory protection:
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer
exposure use self-contained respiratory protective device.
- Protection of hands:
Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/the chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
- Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of
quality and varies from manufacturer to manufacturer.
- Penetration time of glove material
The exact break through time has to be found out by the manufacturer of the protective gloves and has
to be observed.
- Eye protection: Tightly sealed goggles
- Body protection: Use protective suit.
Stability and reactivity
Reactivity risks: No information available
Stability: Stable under recommended storage conditions
Hazardous reactions: No information available.
Hazardous polymerization: No information available
Conditions to avoid: No information available
Materials to avoid: No informaiton available
Hazardous decomposition products: COx. NOx.
Disposal considerations
General: Dispose in a safe manner in accordance with local/national regulations
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
