Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

General advice: Move out of dangerous area. Consult a physician. Show this safety data sheet to the doctor in attendance. Do not leave the victim unattended.

If inhaled: Move to fresh air. If symptoms persist, call a physician. If unconscious, place in recovery position and get medical attention immediately.

In case of skin contact: Immediate medical treatment is necessary as untreated wounds from corrosion of the skin heal slowly and with difficulty.

Wash contaminated clothing before reuse. If on skin, rinse well with water. If on clothes, remove clothes. Flush contaminated skin with plenty of water.

In case of eye contact: Small amounts splashed into eyes can cause irreversible tissue damage and blindness. Remove contact lenses. In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Continue rinsing eyes during transport to hospital. Protect unharmed eye. Keep eye wide open while rinsing.

If eye irritation persists, consult a specialist. If swallowed: Keep respiratory tract clear. Do NOT induce vomiting. Do not give milk or alcoholic beverages.

Never give anything by mouth to an unconscious person. If symptoms persist, call a physician. Take victim immediately to hospital.

Fire-fighting measures

Suitable extinguishing media: Carbon dioxide (CO2). Dry Chemical.

Unsuitable extinguishing media: Water, Foam, High Volume water jet

Specific hazards during fire-fighting: Do not allow run-off from fire fighting to enter drains or water courses.

Hazardous combustion products: Carbon oxides

Accidental release measures

Personal precautions: Use personal protective equipment. Avoid dust formation. Remove all sources of ignition. Evacuate personnel to safe areas.

Environmental precautions: Prevent product from entering drains. Prevent further leakage or spillage if safe to do so. If the product contaminates rivers and lakes or drains inform respective authorities.

Handling and storage

Advice on safe handling: Avoid formation of respirable particles. Do not breathe vapours/dust. Avoid contact with skin and eyes. For personal protection see section 8.

Smoking, eating and drinking should be prohibited in the application area. Open drum carefully as content may be under pressure. Dispose of rinse water in accordance with local and national regulations.

Advice on protection against fire and explosion: Avoid dust formation. Provide appropriate exhaust ventilation at places where dust is formed. Keep away from open flames, hot surfaces and sources of ignition. Keep away from combustible material.

Hygiene measures: When using do not eat or drink. When using do not smoke. Wash hands before breaks and at the end of workday.

Requirements for storage areas and containers: Prevent unauthorized access. Keep container tightly closed in a dry and well-ventilated place. Containers which are opened

must be carefully resealed and kept upright to prevent leakage. Observe label precautions. Electrical installations / working materials must comply with the technological safety standards. To maintain product quality, do not store in heat or direct sunlight.

Advice on common storage: Never allow product to get in contact with water during storage.

Storage class (TRGS 510): 4.2, Pyrophoric and self-heating hazardous materials

Other data: keep in a dry place. No decomposition if stored and apllied as directed.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Control paramters: Contains no substances with occupational exposure limit values.

Exposure controls- Engineering measures: Handle only in a place equipped with local exhaust (or other appropriate exhaust).

Exposure controls- Personal protective equipment: Eye protection: safety glasses with side-shields conforming to EN166; Hand protection Material:leather, aluminum-coated & Break through time: <60 min; Skin and body protection:  choose body protection according to the amount and concentration of the dangerous substance at the work place; Respiratory protection: ABEK-P3 filter; Filter type: Combined particulates, inorganic and acidic gas/vapour, ammonia/amines and organic vapour type (ABEK-P)

Stability and reactivity

Chemical stability: No decomposition if stored and applied as directed.

Possibility of hazardous reactions: Hazardous reactions: No decomposition if stored and applied as directed. Reacts violently with water. Avoid moisture.

Conditions to avoid: Take measures to prevent the build up of electrostatic charge. Heat, flames and sparks.Exposure to air

Disposal considerations

Waste treatment method- product: Do not dispose of waste into sewer.

Dispose of in accordance with the European Directives on waste and hazardous waste. In accordance with local and national regulations. Do not contaminate ponds, waterways or ditches with chemical or used container. According to the European Waste Catalogue, Waste Codes are not product specific, but application specific.

Waste codes should be assigned by the user, preferably in discussion with the waste disposal authorities. Send to a licensed waste management company.

Waste treatment method-Contaminated packaging: Empty remaining contents. Dispose of as unused product. Do not re-use empty containers.

Do not burn, or use a cutting torch on, the empty drum.