Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 701-463-8 | CAS number: -
Guidance on Safe Use
Administrative data
First-aid measures
- After inhalation:
Supply fresh air. If symptoms are experienced, get medical attention.
In case of unconsciousness place patient stably in side position for transportation.
· After skin contact:
Product at ambient temperature:
Immediately rinse with plenty of water. Remove contaminated clothing and shoes. Wash clothing before reuse. Clean
shoes thoroughly before reuse. Get medical attention if irritations occurs.
Hot product:
Immediately immerse or flush the burn area with large amounts of cold water (at least 15 minutes). Do not remove
solidified material from burned skin as the damaged skin can be easily torn. Transfer immediately to hospital.
· After eye contact:
Product at ambient temperature:
Immediately rinse with water. Remove contact lenses if present and easy to do. Hold eyelids apart and flush eyes with
plenty of cool low-pressure water for several minutes. Il symptoms persist, consult a doctor.
Hot product:
Do not open eyelids if covered with resins. Immediately flush eyes with large amounts of water for at least 15 minutes.
Do not remove solidified material from burned eye as the damaged tissues can be easily torn. Transfer immediately to
hospital.
· After swallowing:
Do not induce vomiting. If the person is conscious, immediately rinse out mouth with water.
- No adverse health effects are expected from accidental ingestion of small amounts of this product. In case of lasting
symptoms, consult a doctor.
- For ingestion of large amounts: do not induce vomiting and get medical attention.
Indication of any immediate medical attention and special treatment needed
For doctors: Mineral oil may be used to loosen and soften the material.
Fire-fighting measures
Suitable extinguishing agents: carbon dioxide, foam, fire-extinguishing powder.
Hazardous thermal decomposition products: in case of fire, may release irritant and toxic fumes.
Special protective equipment for fire-fighters:
Firefighters should wear appropriate protective equipment and self-contained breathing apparatus.
Additional information: cool endangered receptacles with water spray.
Accidental release measures
Personal precautions and protective equipment:
Wear personal protective equipment. Keep unprotected persons away.
Provide adequate ventilation.
Measures for environmental protection:
Do not allow product to reach soil, waterways, drains and sewers. Inform the relevant authorities if the product has caused environmental pollution (soil, waterways, drains or sewers).
Methods and material for containment and cleaning up:
Small spills: absorb spilled liquid with inert absorbent. Collect in an appropriate container properly labelled. Close it for disposal.
Large spills: stop spill if it can be done without danger. Dike. Pump as much liquid as possible with an explosion-proof pump or a
hand pump. Absorb the remaining liquid with inert absorbent. Collect in an appropriate container properly labelled. Close it for disposal.
Handling and storage
- Precautions for safe handling:
Wear appropriate personal protective equipment. Provide adequate ventilation in the workplace.
· Information about fire - and explosion protection:
Protect against electrostatic charges.
Use only non-sparking tools.
Protect from heat.
Keep ignition sources away.
- Conditions for safe storage
Store if possible under cover in a dry, cool and well-ventilated area.
Protect from heat and direct sunlight.
All equipments including ventilation systems must be equipotential and earthed.
Store only in the original container.
Keep container tightly sealed.
· Further information about storage conditions:
· Recommended storage temperature: Store at a temperature between 5 and 30°C.
Transport information
Land transport (UN RTDG/ADR/RID)
- UN number:
- Not classified as a dangerous good under transport regulation.
Shippingopen allclose all
SpecialProvisionsopen allclose all
Inland waterway transport (UN RTDG/ADN(R))
- UN number:
- Not classified as a dangerous good under transport regulation.
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
- UN number:
- Not classified as a dangerous good under transport regulation.
Shippingopen allclose all
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
- UN number:
- Not classified as a dangerous good under transport regulation.
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
· General protective and hygienic measures:
The usual precautionary measures are to be adhered to when handling chemicals. Emergency eye wash fountains
and safety showers should be available in the immediate vicinity of any potential exposure.
Immediately remove all soiled and contaminated clothing.
Avoid contact with eyes and skin.
· Personal protective equipment
· Respiratory protection:
In case of insufficient ventilation:
Avoid breathing vapors by wearing an appropriate filter cartridge mask.
· Hand protection:
Protective gloves resistant to chemicals (standard EN 374-3). They should be replaced regularly and if there is any
indication of degradation or chemical breakthrough.
· Eye protection: Safety glasses
· Body protection:
Protective work clothing.
Personnel exposed to HOT MOLTEN or HOT LIQUID material should wear protective clothing that provides
protection against thermal burns.
· Risk management measures
Further information on how to manage the risks arising from dusts and from hot resins:
- HARRPA guidance - SAFE HANDLING OF HOT ROSIN/RESINS
http://www.harrpa.eu/
Stability and reactivity
Chemical stability :
Product stable under storage and handling conditions according to specifications (cf "handling and storage").
Conditions to avoid :
Keep away from heat and sources of ignition.
Materials to avoid :
Avoid contact with strong acids, strong oxidising agents, strong reducing agents.
Disposal considerations
Waste treatment methods: national and regional regulations have to be adhered to.
Recommendation: the product has to be disposed of in an authorised incinerator, according to regulation.
Uncleaned packaging
Recommendation: packaging has to be sent to an authorised waste treatment facility, for recycling or disposal.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
