Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

- General advice:

Immediately remove any clothing soiled by the product.

- Following inhalation:

Supply fresh air; consult doctor in case of complaints. In case of unconsclousness place patient stably in side position for transportation.

- Following skin contact:

Immediately wash with water and soap and rinse thoroughly. Seek medical attention in case of problems or if problems persist.

- Following eye contact:

Rinse opened eye for several minutes under running water. Remove contact lenses, if present and easy to do. Continue rinsing. Seek immediate medical advice.

- After swallowing:

Never give anything by mouth to an unconscious person or a person with cramps. Drink plenty of water and provide fresh air. Call for a doctor immediately.

- Most important symptoms and effects: No further relevant information available.

- Indication of any immediate medical attention and special treatment needed: First Aid, decontamination, treatment of symptoms.

Fire-fighting measures

- Suitable extinguishing media:

Use fire extinguishing methods suitable to surrounding conditions. Water haze, Water spray, Foam, Fire-extinguishing powder, Carbon dioxide

- Unsuitable extinguishing media:

Water with full jet

- Special hazards arising from the substance or mixture:

In case of fire, the following can be released: Carbon monoxide, Carbon dioxide, Hydrogen chloride

- Advice for fire fighter: Protective equipment: Wear self-contained respiratory protective device. Additional information: Move undamaged containers from immediate hazard area if it can be done safely.

Accidental release measures

- Personal precautions, Protective equipment and emergency procedures:

Wear protective clothing.

- Environmental precautions:

Dumping into the environment must be prevented.Do not allow to enter sewers/ surface or ground water. Inform respective authorities in case of seepage into water course or sewage system.

- Methods and material for containment and cleaning up: Pick up mechanically. Waste disposal according to official state regulations.

Handling and storage

- Precautions for safe handling:

Prevent formation of dust. Ensure adequate ventilation.

- Information about fire - and explosion protection: Usual measures for fire prevention.

- Conditions for safe storage, including any incompatibilities:

Storage: Requirements to be met by storerooms and receptacles: Store only in the original container. Keep container tightly closed in a well-ventilated place.

Information about storage in one common storage facility: Keep away from food, drink and animal feeding stuffs.

Further information about storage conditions: Keep container tightly sealed. Ensure that local, federal and national legislation on storage conditions are observed.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
UN1759
Shipping information
Proper shipping name and description:
1759 CORROSIVE SOLID, N.O.S. (1,1'-(chlorophenylmethylene)bis[4-methoxybenzene])
Chemical name:
1,1'-(chlorophenylmethylene)bis[4-methoxybenzene]
Language:
English
Labels:
8, Corrosive substances
Symbol (liquids, spilling from two glass vessels and attacking a hand and a metal), black
Symbol (marine pollutant)
Special provisions / remarks
Special provisions:
Transport/Additional information:

Limited quantities (LQ): 1 kg
Excepted quantities (EQ): Code: E2
Maximum net quantity per inner packaging: 30 g
Maximum net quantity per outer packaging: 500 g
Transport category 2
Tunnel restriction code: E

IMDG
Limited quantities (LQ): 1 kg
Excepted quantities (EQ): Code: E2
Maximum net quantity per inner packaging: 30 g
Maximum net quantity per outer packaging: 500 g
UN "Model Regulation": UN 1759 CORROSIVE SOLID, N.O.S. (1,1'-(CHLOROPHENYLMETHYLENE)BIS[4-METHOXYBENZENE]), 8, II
Remarks:
Special precautions for user: Warning: Corrosive substances.
Danger code (Kemler): 80
EMS Number: F-A,S-B
Stowage Category A
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
UN1759
Shipping information
Proper shipping name and description:
CORROSIVE SOLID, N.O.S. (1,1'-(chlorophenylmethylene)bis[4-methoxybenzene])
Chemical name:
1,1'-(chlorophenylmethylene)bis[4-methoxybenzene]
Labels:
8, Corrosive substances
Symbol (liquids, spilling from two glass vessels and attacking a hand and a metal), black
Special provisions / remarks
Remarks:
Special precautions for user: Warning: Corrosive substances.
Danger code (Kemler): 80
EMS Number: F-A,S-B
Stowage Category A

Air transport (UN RTDG/ICAO/IATA)

UN number:
UN1759
Shipping information
Proper shipping name and description:
1759 CORROSIVE SOLID, N.O.S. (1,1'-(chlorophenylmethylene)bis[4-methoxybenzene])
Chemical name:
1,1'-(chlorophenylmethylene)bis[4-methoxybenzene]
Labels:
8, Corrosive substances
Symbol (liquids, spilling from two glass vessels and attacking a hand and a metal), black
Special provisions / remarks
Remarks:
Special precautions for user: Warning: Corrosive substances.
Danger code (Kemler): 80
EMS Number: F-A,S-B
Stowage Category A

Additional transport information

Additional information
Special provisions / remarks / other:
Transport/Additional information:

Limited quantities (LQ): 1 kg
Excepted quantities (EQ): Code: E2
Maximum net quantity per inner packaging: 30 g
Maximum net quantity per outer packaging: 500 g
Transport category 2
Tunnel restriction code: E

IMDG
Limited quantities (LQ): 1 kg
Excepted quantities (EQ): Code: E2
Maximum net quantity per inner packaging: 30 g
Maximum net quantity per outer packaging: 500 g
UN "Model Regulation": UN 1759 CORROSIVE SOLID, N.O.S. (1,1'-(CHLOROPHENYLMETHYLENE)BIS[4-METHOXYBENZENE]), 8, II

Exposure controls / personal protection

1. Technical protection measures: Technical measures and the application of adequate working methods take priority over the use of personal protection equipment.

2. Organisational protection measures

3. Hand protection: Tested protective gloves are to be worn. When handling chemical substances, chemical protective gloves must be worn with CE label including a four digit code. Type of chemical protective gloves to choose depends on the concentration and quantity of dangerous substances as well as on work place specifications. In the cases of special applications, it is recommended to check the chemical resistance with the manufacturer of the gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Material of gloves: The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. Penetration time of glove material: The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.

4. Feet protection: not applicable

5. Body protection: not applicable

6. Eye protection: Safety glasses

7. Respiratory protection: If technical suction or ventilation measures are not possible or are insufficient, protective breathing apparatus must be worn. The filter class must be suitable for the maximum contaminant concentration (gas/vapour/aerosol/particulates) that may arise when handling the product. If the concentration is exceeded, a self-contained breathing apparatus must be used!

Limitation and supervision of exposure into the environment: Dumping into the environment must be prevented.

Stability and reactivity

1. Reactivity

: The product is stable under standard conditions (temperature, pressure) of storage and handling.

2. Chemical stability

: The product is stable under standard conditions (temperature, pressure) of storage and handling.

3. Possibility of hazardous reactions

: No dangerous reactions known.

4. Conditions to avoid

: No further relevant information available.

5. Incompatible materials

: No further relevant information available.

6. Hazardous decomposition products: not applicable

Disposal considerations

Waste treatment methods

Recommendation: Must not be disposed together with household garbage. Do not allow product to reach sewage system. Waste disposal according to official state regulations. Dumping into the environment must be prevented.

Uncleaned packaging:

Recommendation: Empty contaminated packagings thoroughly. They may be recycled after thorough and proper cleaning. Packagings that may not be cleansed are to be disposed of in the same manner as the product.