Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

Key value for chemical safety assessment

Genetic toxicity in vitro

Description of key information

The key value is based on a bacterial reverse mutation assay with Quaternium-26.

Link to relevant study records
Reference
Endpoint:
in vitro gene mutation study in bacteria
Type of information:
experimental study
Adequacy of study:
key study
Study period:
Experimental starting date : 05 January 2017 - Experimental completion date : 09 February 2017
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
guideline study
Qualifier:
according to guideline
Guideline:
OECD Guideline 471 (Bacterial Reverse Mutation Assay)
Version / remarks:
Adopted July 21, 1997
Deviations:
no
Qualifier:
according to guideline
Guideline:
EU Method B.13/14 (Mutagenicity - Reverse Mutation Test Using Bacteria)
Version / remarks:
31 May 2008
Deviations:
no
GLP compliance:
yes (incl. QA statement)
Type of assay:
bacterial reverse mutation assay
Specific details on test material used for the study:
Test item 207569/A
Identification Quaternium-26
Appearance Clear amber to dark amber liquid
Batch 0001890069
Purity 60%
Storage At room temperature
Stable under storage conditions until 26 May 2017 (retest date)
Target gene:
histidine-requiring Salmonella typhimurium bacterial strains resulting in histidine-independent strains, and tryptophan-requiring Escherichia coli bacterial strain resulting in a tryptophan-independent strain.
Species / strain / cell type:
S. typhimurium TA 1535, TA 1537, TA 98 and TA 100
Species / strain / cell type:
E. coli WP2 uvr A
Metabolic activation:
with and without
Metabolic activation system:
Rat liver microsomal enzymes (S9 homogenate)
Test concentrations with justification for top dose:
Selection of an adequate range of doses was based on a dose range finding test with the strains TA100 and WP2uvrA, both with and without 5% (v/v) S9-mix:
1.7, 5.4, 17, 52, 164, 512, 1600 and 5000 μg/plate tested in triplicate.
The highest concentration of Quaternium-26 used in the subsequent mutation assay was the level at which the test item inhibited bacterial growth.
First mutation experiment with the tester strains:
TA100 and WP2uvrA: 1.7, 5.4, 17, 52, 164, 512, 1600 and 5000 μg/plate in the absence and presence of S9-mix.
TA1535, TA1537 and TA98:
- Without S9-mix: 0.17, 0.55, 1.7, 5.4, 17, 52 and 164 μg/plate.
- With S9-mix: 0.55, 1.7, 5.4, 17, 52 and 164 μg/plate.
Vehicle / solvent:
Milli-Q water
Untreated negative controls:
yes
Negative solvent / vehicle controls:
no
True negative controls:
no
Positive controls:
yes
Positive control substance:
4-nitroquinoline-N-oxide
2-nitrofluorene
sodium azide
methylmethanesulfonate
other: ICR-191
Untreated negative controls:
yes
Negative solvent / vehicle controls:
no
True negative controls:
no
Positive controls:
yes
Positive control substance:
other: 2-aminoanthracene
Details on test system and experimental conditions:
Test system: Salmonella typhimurium bacteria and Escherichia coli bacteria
Rationale: Recommended test system in international guidelines (e.g.OECD, EC).
Source: Trinova Biochem GmbH, Germany [Master culture from Dr.Bruce N. Ames (TA1535: 2006, TA1537: 2016, TA98: 2015, TA100: 2015; and Master culture from The National Collections of Industrial and Marine Bacteria, Aberdeen, UK (WP2uvrA: 2008)]
The characteristics of the different Salmonella typhimurium strains were as follows:
Strain Histidine mutation Mutation type
TA1537 hisC3076 Frameshift
TA98 hisD3052/R-factor* Frameshift
TA1535 hisG46 Base-pair substitutions
TA100 hisG46/R-factor* Base-pair substitutions
*: R-factor = plasmid pKM101 (increases error-prone DNA repair)
Each tester strain contained the following additional mutations:
rfa : deep rough (defective lipopolysaccharide cellcoat)
gal : mutation in the galactose metabolism
chl : mutation in nitrate reductase
bio : defective biotin synthesis
uvrB : loss of the excision repair system (deletion of the ultraviolet-repair B gene)
The Salmonella typhimurium strains are regularly checked to confirm their histidine-requirement, crystal violet sensitivity, ampicillin resistance (TA98 and TA100), UV-sensitivity and the number of spontaneous revertants. The Escherichia coli WP2uvrA strain detects base-pair substitutions. The strain lacks an excision repair system and is sensitive to agents such as UV. The sensitivity of the strain to a wide variety of mutagens has been enhanced by permeabilization of the strain using Tris-EDTA treatment (Ref.1). The strain is regularly checked to confirm the tryptophan-requirement, UV-sensitivity and the number of spontaneous revertants.
Stock cultures of the five strains were stored in liquid nitrogen (-196°C).
Preparation of bacterial cultures:
Samples of frozen stock cultures of bacteria were transferred into enriched nutrient broth (Oxoid LTD, Hampshire, England) and incubated in a shaking incubator (37 ± 1°C,
150 rpm), until the cultures reached an optical density of 1.0 ± 0.1 at 700 nm (109 cells/ml). Freshly grown cultures of each strain were used for testing.
Agar plates:
Agar plates (ø 9 cm) containing 25 ml glucose agar medium. Glucose agar medium contained per liter: 18 g purified agar (Oxoid LTD) in Vogel-Bonner Medium E, 20 g glucose (Fresenius Kabi, Bad Homburg, Germany). The agar plates for the test with the Salmonella typhimurium strains also contained 12.5 μg/plate biotin (Merck) and 15 μg/plate histidine (Sigma) and the agar plates for the test with the Escherichia coli strain contained 15 μg/plate tryptophan (Sigma).
Top agar:
Milli-Q water containing 0.6% (w/v) bacteriological agar (Oxoid LTD) and 0.5% (w/v) sodium chloride (Merck) was heated to dissolve the agar. Samples of 3 ml top agar were transferred into 10 ml glass tubes with metal caps. Top agar tubes were autoclaved for 20 min at 121 ± 3°C.
Environmental conditions:
All incubations were carried out in a controlled environment at a temperature of 37.0 ± 1.0°C (actual range 35.4 – 40.1°C). The temperature was continuously monitored throughout the experiment. Due to addition of plates (which were at room temperature) to the incubator or due to opening and closing the incubator door, temporary deviations from the temperature may occur. Based on laboratory historical data these deviations are considered not to affect the study integrity.
Metabolic activation system:
Rat liver microsomal enzymes (S9 homogenate) were obtained from Trinova Biochem GmbH, Giessen, Germany and were prepared from male Sprague Dawley rats that had been injected intraperitoneally with Aroclor 1254 (500 mg/kg body weight). Each S9 batch is characterised with the mutagens benzo-(a)-pyrene and 2-aminoanthracene, which require metabolic activation, in tester strain TA100 at concentrations of 5 μg/plate and 2.5 μg/plate, respectively.
S9-mix was prepared immediately before use and kept on ice. S9-mix contained per 10 ml: 30 mg NADP (Randox Laboratories Ltd., Crumlin, United Kingdom) and 15.2 mg glucose-6-phosphate (Roche Diagnostics, Mannheim, Germany) in 5.5 ml (first experiment) or 5.0 ml Milli-Q water (second and fourth experiment) (Millipore Corp., Bedford, MA., USA); 2 ml 0.5 M sodium phosphate buffer pH 7.4; 1 ml 0.08 M MgCl2 solution (Merck); 1 ml 0.33 M KCl solution (Merck). The above solution was filter (0.22 μm)-sterilized. To 9.5 ml of S9-mix components 0.5 ml S9-fraction was added (5% (v/v) S9-fraction) to complete the S9-mix in the first experiment and to 9.0 ml of S9-mix components 1.0 ml S9-fraction was added (10% (v/v) S9-fraction) to complete the S9-mix in the second and fourth experiment.
Mutation assay:
At least five different doses (increasing with approximately half-log steps) of the test item were tested in triplicate in each strain. The above mentioned dose range finding study with the two tester strains TA100 and WP2uvrA, is reported as a part of the first mutation experiment. In the second part of this experiment, the test item was tested both in the absence and presence of 5% (v/v) S9-mix in the tester strains TA1535, TA1537 and TA98. In a follow-up experiment with additional parameters, the test item was tested both in the absence and presence of 10% (v/v) S9-mix in all tester strains. Additional experiments were performed with the tester strains TA98 and WP2uvrA in the absence and presence of S9-mix, respectively
The negative control (vehicle) and relevant positive controls were concurrently tested in each strain in the presence and absence of S9-mix. Top agar in top agar tubes was melted by heating to 45 ± 2°C. The following solutions were successively added to 3 ml molten top agar: 0.1 ml of a fresh bacterial culture (109 cells/ml) of one of the tester strains, 0.1 ml of a dilution of the test item in Milli-Q water and either 0.5 ml S9-mix (in case of activation assays) or 0.5 ml 0.1 M phosphate buffer (in case of
non-activation assays). The ingredients were mixed on a Vortex and the content of the top agar tube was poured onto a selective agar plate. After solidification of the top agar, the plates were inverted and incubated in the dark at 37.0 ± 1.0 °C for 48 ± 4 h. After this period revertant colonies (histidine independent (His+) for Salmonella typhimurium bacteria and tryptophan independent (Trp+) for Escherichia coli) were counted.
Colony counting:
The revertant colonies were counted automatically with the Sorcerer Colony Counter. Plates with sufficient test item precipitate to interfere with automated colony counting were counted manually. Evidence of test item precipitate on the plates and the condition of the bacterial background lawn were evaluated when considered necessary, macroscopically and/or microscopically by using a dissecting microscope.
Evaluation criteria:
Acceptability of the assay:
A Salmonella typhimurium reverse mutation assay and/or Escherichia coli reverse mutation assay is considered acceptable if it meets the following criteria:
a) The vehicle control and positive control plates from each tester strain (with or without S9-mix) must exhibit a characteristic number of revertant colonies when compared against relevant historical control data generated at Charles River Den Bosch.
b) The selected dose range should include a clearly toxic concentration or should exhibit limited solubility as demonstrated by the preliminary toxicity range-finding test or should extend to 5 mg/plate.
c) No more than 5% of the plates are lost through contamination or some other unforeseen event. If the results are considered invalid due to contamination, the experiment will be repeated.
Statistics:
Data evaluation and statistical procedures:
No formal hypothesis testing was done.
In addition to the criteria stated below, any increase in the total number of revertants should be evaluated for its biological relevance including a comparison of the results with the historical control data range. A test item is considered negative (not mutagenic) in the test if:
a) The total number of revertants in the tester strain TA100 or WP2uvrA is not greater than two (2) times the concurrent vehicle control, and the total number of revertants in tester strains TA1535, TA1537 or TA98 is not greater than three (3) times the concurrent vehicle control.
b) The negative response should be reproducible in at least one follow-up experiment.
A test item is considered positive (mutagenic) in the test if:
a) The total number of revertants in the tester strain TA100 or WP2uvrA is greater than two (2) times the concurrent vehicle control, or the total number of revertants in tester strains TA1535, TA1537, TA98 is greater than three (3) times the concurrent vehicle control.
b) In case a follow up experiment is performed when a positive response is observed in one of the tester strains, the positive response should be reproducible in at least one follow up experiment.
Key result
Species / strain:
S. typhimurium TA 1535
Metabolic activation:
with and without
Genotoxicity:
negative
Cytotoxicity / choice of top concentrations:
cytotoxicity
Vehicle controls validity:
not applicable
Untreated negative controls validity:
valid
Positive controls validity:
valid
Key result
Species / strain:
S. typhimurium TA 1537
Metabolic activation:
with and without
Genotoxicity:
negative
Cytotoxicity / choice of top concentrations:
cytotoxicity
Vehicle controls validity:
not applicable
Untreated negative controls validity:
valid
Positive controls validity:
valid
Key result
Species / strain:
S. typhimurium TA 98
Metabolic activation:
with and without
Genotoxicity:
negative
Cytotoxicity / choice of top concentrations:
cytotoxicity
Vehicle controls validity:
not applicable
Untreated negative controls validity:
valid
Positive controls validity:
valid
Key result
Species / strain:
S. typhimurium TA 100
Metabolic activation:
with and without
Genotoxicity:
negative
Cytotoxicity / choice of top concentrations:
cytotoxicity
Vehicle controls validity:
not applicable
Untreated negative controls validity:
valid
Positive controls validity:
valid
Key result
Species / strain:
E. coli WP2 uvr A
Metabolic activation:
with and without
Genotoxicity:
negative
Cytotoxicity / choice of top concentrations:
cytotoxicity
Remarks:
except in tester strain WP2uvrA in the presence of S9-mix
Vehicle controls validity:
not applicable
Untreated negative controls validity:
valid
Positive controls validity:
valid
Additional information on results:
The negative and strain-specific positive control values were within the laboratory historical control data ranges indicating that the test conditions were adequate and that the metabolic activation system functioned properly.
In the second mutation experiment, the test item induced an up to 3.4-fold increase in the number of colonies compared to the solvent control in tester strain TA98 in the absence of
S9-mix. This increase was just outside the laboratory historical control data range, was related to a low vehicle control value and was not dose-related. Furthermore, this increase
was not seen in the first experiment or in the repeat experiment (experiment 3). Therefore this increase is considered to be not biologically relevant.
All other bacterial strains showed negative responses over the entire dose range, i.e. no significant dose-related increase in the number of revertants in any of the experiments.
Remarks on result:
other: Based on two experiments
Conclusions:
Quaternium-26 is not mutagenic in the Salmonella typhimurium reverse mutation assay and in the Escherichia coli reverse mutation assay.
Endpoint conclusion
Endpoint conclusion:
no adverse effect observed (negative)

Additional information

No additional information available.

Justification for classification or non-classification

Quaternium-26 is not mutagenic in the Salmonella typhimurium reverse mutation assay and in the Escherichia coli reverse mutation assay.