Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

Description of first aid measures


Remove victim to fresh air and keep at rest in a position comfortable for breathing. If breathing is difficult or respiratory irritation develops, get medical attention.

Skin Contact:

Wipe away excess material with a dry towel, then wash with soap and water for several minutes. Remove contaminated clothing and shoes. If a rash or skin irritation occurs, contact a physician.

Eye Contact:

Flush with copious amounts of water for at least 15 minutes, lifting eyelids for maximum effectiveness. Get medical attention if irritation develops or persists.


If swallowed, rinse mouth with water. Observe victim for 24 hours. Do NOT induce vomiting. If vomiting occurs, keep head lower than hips to prevent aspiration. If large amounts were ingested, consult a physician/poison control center. Never give anything by mouth to an unconscious person.

Most important symptoms and effects, both acute and delayed

Potential health symptoms and effects


Mists may cause irritation of the respiratory tract.


May cause mild skin irritation upon prolonged or repeated contact.


May cause eye irritation.


May cause gastrointestinal distress.

Indication of any immediate medical attention and special treatment needed

Treat symptomatically and supportively.

Fire-fighting measures

Extinguishing media

Suitable extinguishing media:

Water spray, dry chemical, alcohol foam, or carbon dioxide.

Unsuitable extinguishing media:

Water jet.

Special hazards arising from the substance or mixture

Closed containers may explode due to the buildup of pressure when exposed to extreme heat. Under fire conditions, product may undergo thermal decomposition and emit toxic fumes of COx.

Advice for firefighters

Full protective equipment including self-contained breathing apparatus and protective clothing should be used. Water may be used to cool containers to prevent pressure buildup and possible rupture when exposed to extreme heat. If possible, water contaminated by this material should be contained and prevented from being discharged to any waterway, sewer, or drain to avoid environmental contamination.

Accidental release measures

Personal precautions, protective equipment and emergency procedures

Avoid contact with skin and eyes. Wear protective gloves, eye protection, and face protection. Keep people away from and upwind of spill/leak. Ensure adequate ventilation, especially in confined areas.

Environmental precautions

Avoid dispersal of spilled material or runoff and prevent contact with soil and entry into drains, sewers, and waterways.

Methods and materials for containment and cleaning up

Cover drains and contain spill. Take up with inert absorbent material (e.g. vermiculite, general purpose binder). Shovel or sweep up product and place into an approved container for proper disposal. Wash walking surfaces with detergent and water to reduce slipping hazard. Dispose of material in accordance with local, state and federal regulations.

Handling and storage

Precautions for safe handling

Avoid contact with skin and eyes. Wear protective gloves, eye protection, and face protection. Keep people away from and upwind of spill/leak. Ensure adequate ventilation, especially in confined areas. Wash contaminated clothing and shoes before reuse.

Conditions for safe storage, including any incompatibilities

Store in a cool, dry, and well-ventilated area away from incompatible materials (see Section 10.5). Keep container tightly closed. Protect containers from physical damage. Containers may be hazardous when empty as they contain product residues.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Engineering Measures:

Safety measures and appropriate working conditions should be given priority, with use of personal protective equipment a secondary measure. Use adequate ventilation to reduce the exposure of mists or vapors. Facility should be equipped with an eyewash station and safety shower.

Hygiene Measures:

Avoid contact with eyes or skin. Wash hands thoroughly after use and before eating, drinking or bathroom use.

Personal Protective Equipment (PPE):

Hand Protection:

Wear gloves recommended by glove supplier as impervious to materials in Section 3.

Eye Protection:

Wear protective goggles or safety glasses with side shields and/or full face shield.

Skin Protection:

Wear protective clothing.

Respiratory Protection:

If ventilation is limited

Stability and reactivity


None known.

Chemical stability

Product is stable under ordinary conditions of use and storage.

Possibility of hazardous reactions

Will not occur under ordinary conditions of use and storage.

Conditions to avoid

Contact with incompatible materials, moisture.

Incompatible materials

Strong oxidizers, strong acids.

Hazardous decomposition products

Thermal decomposition may produce toxic fumes of COx.

Disposal considerations

Methods of disposal:

Unused product or empty containers may be disposed of as non-hazardous in accordance with local, state, provincial and national disposal regulations.

Hazardous waste:

This material, as sold, is not considered a hazardous waste under RCRA 40 CFR 261.