Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Ecotoxicological information

Toxicity to microorganisms

Currently viewing:

Administrative data

Link to relevant study record(s)

Reference
Endpoint:
activated sludge respiration inhibition testing
Type of information:
experimental study
Adequacy of study:
key study
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
guideline study
Qualifier:
according to guideline
Guideline:
OECD Guideline 209 (Activated Sludge, Respiration Inhibition Test
Version / remarks:
1984
Deviations:
not specified
GLP compliance:
not specified
Analytical monitoring:
no
Vehicle:
no
Details on test solutions:
PREPARATION AND APPLICATION OF TEST SOLUTION (especially for difficult test substances)
- Method: Direct dispersion in water
- Evidence of undissolved material (e.g. precipitate, surface film, etc.): not reported
Test organisms (species):
activated sludge of a predominantly domestic sewage
Details on inoculum:
- Laboratory culture: The sample was maintained at 21°C with continuous aeration and used on the day of collection
- Name and location of sewage treatment plant where inoculum was collected: Severn Trent Water PLC Sewage Treatment Plant Belper. Debyshire
- Preparation of inoculum for exposure: The pH of the sample was 7.0 and the suspended soils equal 3.9 g/L prior to use
Test type:
static
Water media type:
freshwater
Limit test:
yes
Total exposure duration:
3 h
Nominal and measured concentrations:
blank control, positive control, and nominal 1000 mg/L
Details on test conditions:
TEST SYSTEM
- Aeration: yes
- No. of vessels per concentration (replicates): 3
- No. of vessels per control (replicates): 2
- Sludge concentration (weight of dry solids per volume): 3.9 g/L


EFFECT PARAMETERS MEASURED (with observation intervals if applicable) :
TEST CONCENTRATIONS
- Spacing factor for test concentrations: limit test
- Justification for using fewer concentrations than requested by guideline: limit test
- Range finding study
- Test concentrations: 100 and 1000 mg/L, no adverse effects observed
Reference substance (positive control):
yes
Remarks:
3,5-Dichlorophenol
Key result
Duration:
3 h
Dose descriptor:
EC50
Effect conc.:
> 1 000 mg/L
Nominal / measured:
nominal
Conc. based on:
test mat.
Basis for effect:
inhibition of total respiration
Details on results:
- Effect concentrations exceeding solubility of substance in test medium: yes
- Blank controls oxygen uptake rate: 0.71 and 0.66 mg O2/L/min
- Coefficient of variation of oxygen uptake rate in control replicates: 4%
Validity criteria fulfilled:
yes
Conclusions:
EC50 > 1000 mg/L
Executive summary:

In the activated sludge respiration inhibition study from Mead (1995) with Isonox 232, the EC50 for respiration inhibition was determined in a limit test to be > 1000 mg/L. Doseverification analysis was not performed. The study is considered reliable with restrictions for the risk assessment.

Description of key information

EC50 > 1000 mg/L

Key value for chemical safety assessment

EC50 for microorganisms:
1 000 mg/L

Additional information

In the activated sludge respiration inhibition study from Mead (1995) with Isonox 232, the EC50 for respiration inhibition was determined in a limit test to be > 1000 mg/L. Doseverification analysis was not performed. The study is considered reliable with restrictions for the risk assessment.