Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 220-585-8 | CAS number: 2825-82-3
Endpoint summary
Administrative data
Description of key information
Physico-chemical properties of the registered substance were determined from experimental testing or from QSAR approach. Some endpoints were waived, based on chemical structure of constituents or experience in handling and use of the substance.
The substance is a fluid liquid at ambient temperature.
It is less dense than water, has low solubility and potential for bioaccumulation. The substance is not considered to have surface-active potential.
The substance is CLASSIFIED as a FLAMMABLE liquid. No other physical hazard was identified, based on CLP criteria.
It has potential for Aspiration hazard (hydrocarbon and low viscosity).
Additional information
Summary of relevant physico-chemical properties of the test item:
Endpoint |
Data |
Appearance |
The test item is a liquid at 20 °C and 1 atm. |
Melting point |
The melting point of the test item is stated as -90.0°C. |
Boiling point |
The boiling point was stated as 184.9°C. |
Relative density |
The density of the test item was determined to be 0.9356 g/cm3at 20 °C. |
Granulometry (waiving) |
not applicable (liquid) |
Vapour pressure |
The Vapour Pressure of the test item was extrapolated as 260 Pa at 20°C. |
Log Kow (QSAR) |
The partition coefficient of the substance was calculated to be 4.8 at 25°C. |
Water solubility (QSAR) |
The water solubility of the test item was calculated to be 2.87 mg/L at 25°C. |
Surface tension (waiving) |
Study scientifically unjustified based on chemical structure and non-intended use. |
Auto-ignition temperature (ASTM D 2155) |
The test item has been determined to have an auto-ignition temperature of 245 °C. |
Flash-point (ASTM D 93, ISO 2719) Flammability |
The flash point of test item was determined to be 54.4°C. The test item is considered to be Flammable Liquid cat.3. No hazardous reaction anticipated if contact with air or water, based on chemical structure and experience in handling and use. No self-heating anticipated (liquid.) |
Explosive properties (waiving) |
Waiving (based on chemical structure of the substance) |
Oxidising properties (waiving) |
Waiving (based on chemical structure of the substance) |
| Viscosity | The viscosity was stated as 3.076 mPa.s at 20°C and 2.094 mPa.s at 40°C |
Self-reactive (waiving) |
Waiving (based on chemical structure of the substance) |
Organic peroxide (waiving) |
Waiving (based on chemical structure of the substance) |
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
