Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Physical & Chemical properties

Density

Currently viewing:

Administrative data

Link to relevant study record(s)

Reference
Endpoint:
density, other
Type of information:
experimental study
Adequacy of study:
key study
Reliability:
2 (reliable with restrictions)
Rationale for reliability incl. deficiencies:
other: short summary of results
Qualifier:
according to guideline
Guideline:
other: ASTM 1475-98 test method: Density determined by pycnometry
Deviations:
no
Principles of method if other than guideline:
The density of the liquid resin was determined by pycnometry as prescribed in e.g. ASTM 1475-98.

A stainless steel pycnometer (Soltec Density cup S125364, 100 cm3) is preferred for light-sensitive resins. The mass of the calibrated pycnometer was determined using an analytical balance (OHAUS E0D 120). The vessel was subsequently filled with 100 cm3 of resin and the mass was again determined in order to calculate the density of the liquid. The measurements were conducted at 23 °C.
GLP compliance:
not specified
Type of method:
other: Pycnometer
Specific details on test material used for the study:
Miramer M170 = acrylated resin mainly based on Ethoxy ethoxy ethyl acrylate (CAS Number: 7328-17-8)
Mw = 188g/mol (C9H16O4)
Dynamic viscosity of test material:
NA
Key result
Type:
density
Density:
1.01 g/cm³
Temp.:
23 °C
Conclusions:
The density of 2-Propenoic acid, 2-(2-ethoxyethoxy)ethylester( Miramer M170) was determined by pycnometry and the density was determined to be 1.01 g/cm3 at 23oC.
Executive summary:

The density of 2-Propenoic acid, 2-(2-ethoxyethoxy)ethylester( Miramer M170) was determined bypycnometryand the density was determined to be 1.01 g/cm3 at 23oC.

Description of key information

The density of 2-Propenoic acid, 2-(2-ethoxyethoxy)ethylester( Miramer M170) was determined by pycnometry according to ASTM 1475-98. test method. The density was determined to be 1.01 g/cm3 at 23oC.

Key value for chemical safety assessment

Additional information

The density of2-Propenoic acid, 2-(2-ethoxyethoxy)ethylester( Miramer M170) was determined by pycnometry according to ASTM 1475-98. test method. The density was determined to be 1.01 g/cm3 at 23oC.