Registration Dossier
Registration Dossier
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: - | CAS number: -
Guidance on Safe Use
Administrative data
First-aid measures
General information
Remove/Take off immediately all contaminated clothing.
Get medical advice/ attention if you feel unwell.
After inhalation
If inhaled, remove to fresh air.
Get medical advice/ attention.
After contact with skin
In case of contact, immediately flush skin with soap and plenty of water.
After contact with eyes
In the case of contact with eyes, rinse immediately with plenty of water and seek medical
advice.
After ingestion
Get medical attention immediately.
Indication of any immediate medical attention and special treatment needed
Treat symptomatically.
Fire-fighting measures
Suitable extinguishing media
Water spray jet
Alcohol-resistant foam
Dry powder
Carbon dioxide (CO2)
Extinguishing media that must not be used for safety reasons
High volume water jet
Special hazards arising from the substance or mixture
In case of fire hazardous decomposition products may be produced such as:
Nitrogen oxides (NOx)
In the event of fire, the gasses formed may have corrosive effects.
Emits toxic and corrosive fumes under fire conditions.
Advice for firefighters
Special protective equipment for firefighting
Self-contained breathing apparatus
Accidental release measures
Personal precautions, protective equipment and emergency procedures
Wear suitable protective equipment.
Ensure adequate ventilation.
Environmental precautions
Do not allow to enter drains or waterways
Methods and material for containment and cleaning up
Pick up mechanically or with binding material (eg sand, sawdust). Rinse away rest with water
Can be landfilled or incinerated, when in compliance with local regulations.
Handling and storage
Precautions for safe handling
Advice on safe handling
Handle and open container with care.
Hygiene measures
Observe the usual precautions for handling chemicals.
Advice on protection against fire and explosion
No special measures necessary.
Conditions for safe storage, including any incompatibilities
Advice on storage compatibility
Keep away from acids.
Transport information
Land transport (UN RTDG/ADR/RID)
- UN number:
- 2735
Shipping information
- Proper shipping name and description:
- Amines, liquid, corrosive, n.o.s.
- Chemical name:
- N,N-bis-(hydroxyethyl)alkylamine
- Labels:
- 8
Special provisions / remarks
- Special provisions:
- Special marking provision: environmentally hazardous
Inland waterway transport (UN RTDG/ADN(R))
- UN number:
- 2735
Shipping information
- Proper shipping name and description:
- Amines, liquid, corrosive, n.o.s.
- Chemical name:
- N,N-bis-(hydroxyethyl)alkylamine
- Labels:
- 8
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
- UN number:
- 2735
Shipping information
- Proper shipping name and description:
- AMINES, LIQUID, CORROSIVE, N.O.S.
- Chemical name:
- N,N-bis-(hydroxyethyl)alkylamine
- Labels:
- 8
- Marine pollutant
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
- UN number:
- 2735
Shipping information
- Proper shipping name and description:
- AMINES, LIQUID, CORROSIVE, N.O.S.
- Chemical name:
- N,N-bis-(hydroxyethyl)alkylamine
- Labels:
- 8
Special provisions / remarks
- Remarks:
- Special marking provision: environmentally hazardous
SpecialProvisionsopen allclose all
Exposure controls / personal protection
General protective measures
Avoid contact with skin and eyes.
Hand protection : Long-term exposure
Impervious butyl rubber gloves
Minimum breakthrough time / gloves : 480 min
Minimum thickness / gloves 0,7 mm
For short-term exposure (splash protection):
Nitrile rubber gloves.
Minimum breakthrough time / gloves : 30 min
Minimum thickness / gloves 0,4 mm
These types of protective gloves are offered by various
manufacturers. Please note the manufacturers´ detailed
statements, especially about the minimum thickness and the
minimum breakthrough time. Consider also the particular
working conditions under which the gloves are being used.
These types of protective gloves are offered by various
manufacturers. Please note the manufacturers´ detailed
statements, especially about the minimum thickness and the
minimum breakthrough time. Consider also the particular
working conditions under which the gloves are being used.
Eye protection : Depending on the risk, wear sufficient eye protection (safety
glasses with side protection or goggles, and if necessary, face
shield.)
Body protection : Wear suitable protective clothing.
Stability and reactivity
Chemical stability
Stable under normal conditions.
Possibility of hazardous reactions
Evolution of heat under influence of acids.
The substance or mixture does not emit flammable gases in contact with water.
None known.
Hazardous decomposition products
Nitrogen oxides (NOx)
The product does not contain any chemical groups which suggest self-reactive properties,
nor is the estimated SADT less than 75 °C, nor is t he exothermic decomposition energy
higher than 300 J/g.
Disposal considerations
Product
In accordance with regulations for hazardous waste, must be taken to a hazardous
waste disposal site
Uncleaned packaging
Packaging that cannot be cleaned should be disposed of as product waste
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
