Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 299-682-2 | CAS number: 93893-89-1
Density
Administrative data
Link to relevant study record(s)
- Endpoint:
- relative density
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 2015-05-21
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 109 (Density of Liquids and Solids)
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.3 (Relative Density)
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- EPA OPPTS 830.7300 (Density / Relative Density / Bulk Density)
- Deviations:
- no
- GLP compliance:
- no
- Remarks:
- The study was conducted under GLP equivalent conditions. The study was conducted under supervision of a quality assurance unit which had ensured e.g. instrumentation validation, reagent/materials certification, analyst certification and providing SOPs.
- Type of method:
- oscillating densitimeter
- Key result
- Type:
- relative density
- Density:
- 0.98
- Temp.:
- 20 °C
- Remarks on result:
- other: compared to water at 4 °C
- Conclusions:
- The relative density of the test item was determined to be 0.98 at 20 °C with respect to water at 4 °C.
- Executive summary:
A study was conducted according to OECD TG 109, Regulation (EC) No 440/2008 method A.3 and OPPTS 830.7300 to determine the relative density of the test item. Therefore the density was measured at a temperature of 20 °C ± 0.01 °C using the oscillating densitometer. An initial calibration with purified-water was carried out. Subsequently three independent measurements of the test item were performed. The mean relative density of the test item at 20 °C with respect to water at 4 °C was determined to be 0.98.
Reference
The test item was aspirated (sucked) into the measuring cell through the aspiration tube.
Results of the measurement of the density of the test item
Test No. |
Temperature [°C] |
Relative Density |
1 |
20 |
0.9780 |
2 |
20 |
0.9784 |
3 |
20 |
0.9792 |
The mean relative density of the test item at 20 °C is 0.9785 (SD = 0.0012, RSD = 0.12 %).
Description of key information
The relative density of the test item was determined to be 0.98 at 20 °C with respect to water at 4 °C.
Key value for chemical safety assessment
- Relative density at 20C:
- 0.98
Additional information
A study was conducted according to OECD TG 109, to determine the relative density of the test item at 20 °C using the oscillating densitometer. An initial calibration with purified-water was carried out. Subsequently three independent measurements of the test item were performed. The mean relative density of the test item at 20 °C with respect to water at 4 °C was determined to be 0.98.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
