Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

General information

If someone exposed to the product feels unwell, contact a doctor and show this safety data sheet.

Remove soiled or soaked clothing immediately

After inhalation

Remove the casualty into fresh air and keep him calm.

After contact with skin

In case of contact with skin wash off immediately with polyethylene glycol 400, then with plenty of water

If polyethylene glycol is not available, rinse of with plenty of water.

After contact with eyes

In case of contact with eyes rinse thoroughly with plenty of water and seek medical advice

After ingestion

When swallowed seek medical aid immediately and show the physician the packaging or the label of the packaging.

Do not induce vomiting.

Advice to doctor

Treat symptomatically.

Fire-fighting measures

Suitable extinguishing media

water spray jet, dry powder, carbon dioxide, alcohol-resistant foam

Extinguishing media that must not be used for safety reasons

Full water jet

Special hazards from the substance itself, its combustion products or from its vapours

In case of fires, hazardous combustion gases are formed: Carbon monoxide (CO), Hydrogen chloride (HCl)

Special protective equipment for firefighting

Use self-contained breathing apparatus

Further information

Fire residues and contaminated firefighting water must be disposed of in accordance with the local regulations.

Accidental release measures

Personal precautions

Wear suitable personal protective equipment.

Avoid contact with skin and eyes.

Remove persons to safety.

Environmental precautions

Do not allow entry to drains,water courses or soil

Methods for cleaning up/taking up

Pick up with liquid binding materials and if necessary fill in containers capable of being locked.

Clean contaminated floors and objects thoroughly with water and detergents, observing environmental regulations

When picked up, treat material as prescribed under heading "Disposal".

Containers in which spilt substance has been collected must be adequately labelled

Handling and storage

Advice on safe handling

Ensure adequate ventilation.

Observe the usual precautions for handling chemicals

Advice on protection against fire and explosion

Keep away from sources of ignition

The product is combustible.

Temperature class : T2

Requirements for storage rooms and vessels

Keep only in the original container

Keep container tightly closed and dry

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
not restricted
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
not restricted
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
not restricted
Shippingopen allclose all
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
not restricted
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

During its lifecycle the substance is handled under strictly controlled conditions and is rigorously contained.

Based on the knowledge of the basic hazards to humans and environment techical, organizational and PPE measures are taken to minimize release and exposure of this substance. National regulatory requirements for the handling of chemicals are also fulfilled. Employees are regularly trained. The efficiency of these measures is controlled e.g. by workplace measurements. In case of deviations these measures are adapted.

General protective measures

Do not inhale vapours

Avoid contact with eyes and skin

Hygiene measures

Wash hands before breaks and after work.

Use barrier skin cream.

Remove soiled or soaked clothing immediately and clean thoroughly before using again.

Respiratory protection : If ventilation insufficient, use a respiratory protection apparatus

Hand protection :

For short-term exposure (splash protection): Nitrile rubber gloves. Minimum breakthrough time/gloves : 30 min, Minimum thickness/gloves 0,3 mm

For long-term exposure: Butyl rubber gloves.Minimum breakthrough time / gloves : > 8 h, Minimum thickness / gloves 0,5 mm

Eye protection : safety glasses/face shield

Body protection : protective clothing

Stability and reactivity

stable under normal conditions

When handled and stored appropriately no dangerous reactions are known

Disposal considerations


Product should be be taken to a suitable and authorized waste disposal site in accordance with relevant regulations and if necessary after consultation with the waste disposal operator and/or the competent Authorities

Uncleaned packaging

Packaging that cannot be cleaned should be disposed of as product waste