Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

After inhalation: fresh air. Consult doctor if feeling unwell.
After skin contact: wash off with plenty of water. Remove contaminated clothing.
After eye contact: rinse out with plenty of water.
After swallowing: immediately make victim drink water (two glasses at most). Consult a

Fire-fighting measures

Suitable extinguishing media
Water, Foam, Carbon dioxide (CO2), Dry powder
Unsuitable extinguishing media
For this substance/mixture no limitations of extinguishing agents are given.

Combustible material
Development of hazardous combustion gases or vapours possible in the event of fire.

Special protective equipment for firefighters
Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by
keeping a safe distance or by wearing suitable protective clothing.
Further information
Prevent fire extinguishing water from contaminating surface water or the ground water system.
Suppress (knock down) gases/vapours/mists with a water spray jet.

Accidental release measures

Advice for non-emergency personnel: Do not breathe vapours, aerosols. Avoid substance
contact. Ensure adequate ventilation. Evacuate the danger area, observe emergency
procedures, consult an expert.

Do not let product enter drains.

Cover drains. Collect, bind, and pump off spills. Take up with liquid-absorbent material (e.g. Chemizorb® ). Dispose of
properly. Clean up affected area.

Handling and storage

Change contaminated clothing. Preventive skin protection recommended. Wash hands after
working with substance.

Tightly closed. Dry.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Technical measures and appropriate working operations should be given priority over the use of
personal protective equipment.

Protective clothing needs to be selected specifically for the workplace, depending on
concentrations and quantities of the hazardous substances handled. The chemical resistance of
the protective equipment should be enquired at the respective supplier.
Eye/face protection
Safety glasses
Hand protection
full contact:
Glove material: Nitrile rubber
Glove thickness: 0,11 mm
Break through time: > 480 min
splash contact:
Glove material: Nitrile rubber
Glove thickness: 0,11 mm
Break through time: > 480 min
The protective gloves to be used must comply with the specifications of EC Directive
89/686/EEC and the related standard EN374.

Other protective equipment
protective clothing

Respiratory protection
required when vapours/aerosols are generated.

Stability and reactivity

The product is chemically stable under standard ambient conditions (room temperature) .

Violent reactions possible with:
Strong oxidizing agents

Disposal considerations

Please consider national regulations related to waste disposal.