Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 247-825-4 | CAS number: 26586-02-7
Guidance on Safe Use
Administrative data
First-aid measures
General advice:
Immediately remove contaminated clothing. If danger of loss of consciousness, place patient in
recovery position and transport accordingly. Apply artificial respiration if necessary. First aid personnel
should pay attention to their own safety.
If inhaled:
Immediately inhale corticosteroid dose aerosol. Keep patient calm, remove to fresh air, seek medical
attention.
On skin contact:
Immediately wash thoroughly with plenty of water, apply sterile dressings, consult a skin specialist.
On contact with eyes:
Immediately wash affected eyes for at least 15 minutes under running water with eyelids held open,
consult an eye specialist.
On ingestion:
Rinse mouth immediately and then drink plenty of water, seek medical attention.
Note to physician:
Treatment: Treat according to symptoms (decontamination, vital functions), no known specific
antidote.
Fire-fighting measures
Suitable extinguishing media:
carbon dioxide, foam, dry extinguishing media
Specific hazards:
carbon monoxide
Special protective equipment:
Wear self-contained breathing apparatus and chemical-protective clothing.
Further information:
Dispose of fire debris and contaminated extinguishing water in accordance with official regulations. If
exposed to fire, keep containers cool by spraying with water.
Accidental release measures
Personal precautions:
Breathing protection required. Sources of ignition should be kept well clear. Ensure adequate
ventilation. Avoid contact with the skin, eyes and clothing. Use personal protective clothing.
Environmental precautions:
Do not discharge into drains/surface waters/groundwater.
Methods for cleaning up or taking up:
For large amounts: Dike spillage. Pump off product.
For residues: Pick up with suitable absorbent material.
Dispose of absorbed material in accordance with regulations.
Handling and storage
Handling
Ensure thorough ventilation of stores and work areas.
Protection against fire and explosion:
If exposed to fire, keep containers cool by spraying with water. Prevent electrostatic charge - sources
of ignition should be kept well clear - fire extinguishers should be kept handy.
Storage
Further information on storage conditions: Keep container tightly closed in a cool, well-ventilated
place. Keep container dry. Keep under inert gas. Protect from the effects of light.
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Components with workplace control parameters
none
Personal protective equipment
Respiratory protection:
Respiratory protection in case of vapour/aerosol release. Gas filter for gases/vapours of organic
compounds (boiling point >65 °C, e. g. EN 14387 Type A)
Hand protection:
Chemical resistant protective gloves (EN 374)
Suitable materials short-term contact and/or splashes (recommended: At least protective index 2,
corresponding > 30 minutes of permeation time according to EN 374)
butyl rubber (butyl) - 0.7 mm coating thickness
chloroprene rubber (CR) - 0.5 mm coating thickness
polyvinylchloride (PVC) - 0.7 mm coating thickness
Supplementary note: The specifications are based on tests, literature data and information of glove
manufacturers or are derived from similar substances by analogy. Due to many conditions (e.g.
temperature) it must be considered, that the practical usage of a chemical-protective glove in practice
may be much shorter than the permeation time determined through testing.
Eye protection:
Tightly fitting safety goggles (cage goggles) (e.g. EN 166) and face shield.
Body protection:
chemical-protection suit (f.e. according to EN 14605)
General safety and hygiene measures:
Do not inhale gases/vapours/aerosols. Avoid contact with the skin, eyes and clothing.
Stability and reactivity
Disposal considerations
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
