Registration Dossier
Registration Dossier
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 613-739-4 | CAS number: 65039-09-0
Guidance on Safe Use
Administrative data
First-aid measures
Description of first aid measures
Immediately remove contaminated clothing. If danger of loss of consciousness, place patient in recovery position and transport accordingly. Apply artificial respiration if necessary. First aid personnel should pay attention to their own safety.
If inhaled:
If difficulties occur after dust has been inhaled, remove to fresh air and seek medical attention.
On skin contact:
Wash thoroughly with soap and water. If irritation develops, seek medical attention.
On contact with eyes:
Wash affected eyes for at least 15 minutes under running water with eyelids held open. If irritation develops, seek medical attention.
On ingestion:
Rinse mouth immediately and then drink plenty of water, seek medical attention.
Fire-fighting measures
Extinguishing media
Suitable extinguishing media:
water spray, dry powder, foam, carbon dioxide
Special hazards arising from the substance or mixture
nitrous gases, chlorides, carbon oxides
The substances/groups of substances mentioned can be released in case of fire.
Advice for fire-fighters
Special protective equipment:
Wear self-contained breathing apparatus and chemical-protective clothing.
Further information:
Collect contaminated extinguishing water separately, do not allow to reach sewage or effluent systems.
Accidental release measures
Personal precautions, protective equipment and emergency procedures
Handle in accordance with good industrial hygiene and safety practice.
Environmental precautions
Do not empty into drains.
Methods and material for containment and cleaning up
For large amounts: Pick up with suitable appliance and dispose of.
For residues: Dispose of absorbed material in accordance with regulations.
Handling and storage
Precautions for safe handling
Ensure thorough ventilation of stores and work areas.
Protection against fire and explosion:
Prevent electrostatic charge - sources of ignition should be kept well clear - fire extinguishers should be kept handy.
Conditions for safe storage, including any incompatibilities
Further information on storage conditions: Containers should be stored tightly sealed in a dry place.
Storage stability:
Product is hygroscopic.
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Control parameters
Components with occupational exposure limits
No occupational exposure limits known.
Exposure controls
Personal protective equipment
Respiratory protection:
Wear respiratory protection if ventilation is inadequate.
Hand protection:
Chemical resistant protective gloves (EN 374)
butyl rubber (butyl) - 0.7 mm coating thickness
nitrile rubber (NBR) - 0.4 mm coating thickness
Manufacturer's directions for use should be observed because of great diversity of types.
Supplementary note: The specifications are based on tests, literature data and information of glove manufacturers or are derived from similar substances by analogy. Due to many conditions (e.g. temperature) it must be considered, that the practical usage of a chemical-protective glove in practice may be much shorter than the permeation time determined through testing.
Eye protection:
Tightly fitting safety goggles (splash goggles) (e.g. EN 166)
General safety and hygiene measures
Handle in accordance with good industrial hygiene and safety practice. Avoid contact with the skin, eyes and clothing. Wearing of closed work clothing is required additionally to the stated personal protection equipment.
Stability and reactivity
Reactivity
No hazardous reactions if stored and handled as prescribed/indicated.
Chemical stability
The product is stable if stored and handled as prescribed/indicated.
Possibility of hazardous reactions
Reacts with alkalies. High temperatures above 250°C may lead to the decomposition of the substance
Conditions to avoid
Research and developmental product, therefore not yet tested or assessed.
Incompatible materials
Substances to avoid:
bases, alkalies
Hazardous decomposition products
1-Ethyl-1H-imidazole, chloroethane
At prolonged and/or strong thermal stressing above the decomposition temperature dangerous decomposition products can be formed.
Disposal considerations
Waste treatment methods
Incinerate in suitable incineration plant, observing local authority regulations.
A waste code in accordance with the European waste catalog (EWC) cannot be specified, due to dependence on the usage.
The waste code in accordance with the European waste catalog (EWC) must be specified in cooperation with disposal agency/manufacturer/authorities.
Contaminated packaging:
Contaminated packaging should be emptied as far as possible; then it can be passed on for recycling after being thoroughly cleaned.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
