Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

Description of first aid measures
General advice: In the case of accident or if you feel unwell, seek medical advice immediately.
When symptoms persist or in all cases of doubt seek medical advice.

Protection of first-aiders: First Aid responders should pay attention to self-protection, and use the recommended personal protective equipment when the potential for exposure exists.

If inhaled: If inhaled, remove to fresh air.
If not breathing, give artificial respiration.
If breathing is difficult, give oxygen.
Get medical attention immediately.

In case of skin contact: Wash with water and soap as a precaution.
Get medical attention if symptoms occur.

In case of eye contact: Flush eyes with water as a precaution.
Get medical attention if irritation develops and persists.

If swallowed: If swallowed, DO NOT induce vomiting.
Get medical attention if symptoms occur.
Rinse mouth thoroughly with water.

Most important symptoms and effects, both acute and delayed
Symptoms :
Inhalation may provoke the following symptoms:
Shortness of breath
Lung oedema

Eye contact may provoke the following symptoms

Risks:Fatal if inhaled.

Treat symptomatically and supportively.

Fire-fighting measures

Extinguishing media
Suitable extinguishing media
: Water spray
Alcohol-resistant foam
Carbon dioxide (CO2)
Dry chemical

Unsuitable extinguishing media: None known.

Special hazards arising from the substance or mixture
Specific hazards during fire-fighting: Exposure to combustion products may be a hazard to health.

Hazardous combustion products: Hydrogen fluoride
carbonyl fluoride
potentially toxic fluorinated compounds
aerosolized particulates
Carbon oxides

Advice for firefighters
Special protective equipment for firefighters: In the event of fire, wear self-contained breathing apparatus. Use personal protective equipment.

Specific extinguishing methods: Use extinguishing measures that are appropriate to local cir-cumstances and the surrounding environment.
Use water spray to cool unopened containers.
Remove undamaged containers from fire area if it is safe to do so.
Evacuate area.

Accidental release measures

Personal precautions, protective equipment and emergency procedures
Personal precautions:
Evacuate personnel to safe areas.
Only trained personnel should re-enter the area.
Follow safe handling advice and personal protective equip-ment recommendations.

Environmental precautions: Discharge into the environment must be avoided.
Prevent further leakage or spillage if safe to do so.
Prevent spreading over a wide area (e.g. by containment or oil barriers).
Retain and dispose of contaminated wash water.
Local authorities should be advised if significant spillages cannot be contained.

Methods and material for containment and cleaning up
Methods for cleaning up: Soak up with inert absorbent material.
For large spills, provide dyking or other appropriate contain-ment to keep material from spreading. If dyked material can be pumped, store recovered material in appropriate container.
Clean up remaining materials from spill with suitable absor-bent.
Local or national regulations may apply to releases and dis-posal of this material, as well as those materials and items employed in the cleanup of releases.
You will need to determine which regulations are applicable.

Handling and storage

Precautions for safe handling
Technical measures: See Engineering measures under EXPOSURE CONTROLS/PERSONAL PROTECTION section.

Local/Total ventilation: Use with local exhaust ventilation.

Advice on safe handling: Do not breathe vapours or spray mist.
Do not swallow.
Avoid contact with eyes.
Avoid prolonged or repeated contact with skin.
Handle in accordance with good industrial hygiene and safety practice, based on the results of the workplace exposure assessment
Keep container tightly closed.
Take care to prevent spills, waste and minimize release to the environment.

Hygiene measures: Ensure that eye flushing systems and safety showers are located close to the working place. When using do not eat, drink or smoke. Wash contaminated clothing before re-use.

Conditions for safe storage, including any incompatibilities
Requirements for storage areas and containers: Keep in properly labelled containers. Store locked up. Keep tightly closed. Keep in a cool, well-ventilated place. Store in accordance with the particular national regulations.

Advice on common storage: Do not store with the following product types:
Strong oxidizing agents
Flammable liquids
Flammable solids
Pyrophoric liquids
Pyrophoric solids
Self-heating substances and mixtures
Substances and mixtures, which in contact with water, emit flammable gases

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Engineering measures
Processing may form hazardous compounds
Minimize workplace exposure concentrations.
Use with local exhaust ventilation.
Personal protective equipment
Eye protection: Wear the following personal protective equipment:
Safety glasses

Hand protectionMaterial : butyl-rubber
Break through time : 480 min
Glove thickness : 0.89 mm

Choose gloves to protect hands against chemicals depend-ing on the concentration and quantity of the hazardous substance and specific to place of work. For special applications, we recommend clarifying the resistance to chemicals of the aforementioned protective gloves with the glove man-ufacturer. Wash hands before breaks and at the end of workday.

Skin and body protection: Skin should be washed after contact.

Respiratory protection : Use respiratory protection unless adequate local exhaust ventilation is provided or exposure assessment demon-strates that exposures are within recommended exposure guidelines.

Filter type : Combined particulates and acidic gas/vapour type (E-P)

Stability and reactivity

Not classified as a reactivity hazard.

Chemical stability
Stable under normal conditions.

Possibility of hazardous reactions
Hazardous reactions: Can react with strong oxidizing agents.
Hazardous decomposition products will be formed at elevat-ed temperatures.

Conditions to avoid: None known.

Incompatible materials
Materials to avoid: Oxidizing agents

Hazardous decomposition products
Thermal decomposition: Hydrofluoric acid
Carbonyl difluoride
Carbon dioxide
Carbon monoxide

Disposal considerations

Waste treatment methods
Product : Dispose of in accordance with local regulations.
According to the European Waste Catalogue, Waste Codes are not product specific, but application specific.
Waste codes should be assigned by the user, preferably in discussion with the waste disposal authorities.

Contaminated packaging : Empty containers should be taken to an approved waste handling site for recycling or disposal.
If not otherwise specified: Dispose of as unused product.