Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 436-150-2 | CAS number: -
Guidance on Safe Use
Guidance on Safe Use
Currently viewing:
Administrative data
First-aid measures
Emergency measure - Inhalation: Remove from exposure. If not breathing, give artificial
respiration. Obtain medical attention.
Emergency measure - Eyes: Rinse eyes thoroughly with water for at least 15 minutes.
Obtain medical attention.
Emergency measure - Skin: Remove contaminated clothing. Thoroughly wash exposed area
with soap and water. Obtain medical attention.
Emergency measure - Ingestion: Give copious amounts of water and induce vomiting. Obtain
medical attention.
respiration. Obtain medical attention.
Emergency measure - Eyes: Rinse eyes thoroughly with water for at least 15 minutes.
Obtain medical attention.
Emergency measure - Skin: Remove contaminated clothing. Thoroughly wash exposed area
with soap and water. Obtain medical attention.
Emergency measure - Ingestion: Give copious amounts of water and induce vomiting. Obtain
medical attention.
Fire-fighting measures
Recommended extinguishing agent: Water spray, dry chemical or foam mist.
Product arising from burning: The substance is combustible and will burn if involved in a
fire, evolving noxious fumes (eg oxides of carbon, nitrogen,
sulfur and halogenated species). However, there is no
experimental evidence to support the anticipated combustion
products.
Product determined by test: N
Protective equipment: Full protective clothing and self-contained breathing
apparatus must be worn.
Product arising from burning: The substance is combustible and will burn if involved in a
fire, evolving noxious fumes (eg oxides of carbon, nitrogen,
sulfur and halogenated species). However, there is no
experimental evidence to support the anticipated combustion
products.
Product determined by test: N
Protective equipment: Full protective clothing and self-contained breathing
apparatus must be worn.
Accidental release measures
Emergency measures in case of spillage: Evacuate personnel from immediate vicinity.
Carefully, sweep, scoop or using a HEPA vacuum, vacuum up
spill. Minimize contact with spilled material. Keep other
personnel away from the clean up area. Wear appropriate
respiratory protection and protective clothing in the spill
area. Notify a supervisor immediately. Clean area with an
alkaline detergent/cleaner. Dispose of spilled material and
clean up materials in an environmentally sound manner.
Incineration is the preferred disposal method.
Carefully, sweep, scoop or using a HEPA vacuum, vacuum up
spill. Minimize contact with spilled material. Keep other
personnel away from the clean up area. Wear appropriate
respiratory protection and protective clothing in the spill
area. Notify a supervisor immediately. Clean area with an
alkaline detergent/cleaner. Dispose of spilled material and
clean up materials in an environmentally sound manner.
Incineration is the preferred disposal method.
Handling and storage
Handling: The substance should be stored, handled and used in
conditions of good industrial hygiene and in conformity with
any local regulations in order to avoid exposure to skin,
eyes and inhalation.
Engineering controls are necessary to reduce exposure to the
substance.
When exposure cannot be prevented or adequately controlled,
the use of personal protective equipment such as rubber
latex gloves along with a face mask incorporating an
appropriate particulate filter should be used. Such personal
protective equipment should conform to the appropriate
European or national standards as follows:
Protective gloves to EN374
Protective clothing to EN368
Eye protection to EN166
RPE to EN149 as a minimum.
The standards mentioned above should be regarded as a
minimum.
Storage: Store in a dry well-ventilated area at ambient temperature.
Keep containers tightly closed when not in use.
Packaging of the substance and or preparation: Double plastic lined fibreboard drums.
conditions of good industrial hygiene and in conformity with
any local regulations in order to avoid exposure to skin,
eyes and inhalation.
Engineering controls are necessary to reduce exposure to the
substance.
When exposure cannot be prevented or adequately controlled,
the use of personal protective equipment such as rubber
latex gloves along with a face mask incorporating an
appropriate particulate filter should be used. Such personal
protective equipment should conform to the appropriate
European or national standards as follows:
Protective gloves to EN374
Protective clothing to EN368
Eye protection to EN166
RPE to EN149 as a minimum.
The standards mentioned above should be regarded as a
minimum.
Storage: Store in a dry well-ventilated area at ambient temperature.
Keep containers tightly closed when not in use.
Packaging of the substance and or preparation: Double plastic lined fibreboard drums.
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
Shippingopen allclose all
Special provisions / remarks
- Remarks:
This material is not classified for transportation.
SpecialProvisionsopen allclose all
Exposure controls / personal protection
The health hazard risks of handling this material are dependent on many factors, including physical form, duration and frequency of process or task, and
effectiveness of engineering controls. Site-specific risk assessments should be conducted to determine the feasibility and the appropriateness of all
exposure control measures. Exposure controls for normal operating or routine procedures follow a tiered strategy. Engineering controls are the
preferred means of long-term or permanent exposure control. If engineering controls are not feasible, appropriate use of personal protective equipment
(PPE) may be considered as alternative control measures. Exposure controls for non-routine operations must be evaluated and addressed as part of
the site-specific risk assessment.
RECOMMENDED PERSONAL PROTECTIVE EQUIPMENT (PPE):
Body Protection: In small-scale or laboratory operations, lab coats or equivalent protection is required. Disposable Tyvek or
other dust impermeable suit should be considered based on procedure or level of exposure. Use of
additional PPE such as shoe coverings, gauntlets, hood, or head covering may be necessary. Consult
your site safety staff for guidance.
In large-scale or manufacturing operations, disposable Tyvek or other dust impermeable suit is
recommended and based on level of exposure. Use of additional PPE such as shoe coverings, gauntlets,
hood, or head covering may be necessary. Consult your site safety staff for guidance.
Skin Protection: Gloves that provide an appropriate barrier to the skin are recommended if there is potential for contact with
this material. Consult your site safety staff for guidance.
Respiratory Protection: Respiratory protective equipment (RPE) may be required for certain laboratory and large-scale
manufacturing tasks if potential airborne breathing zone concentrations of substances exceed the relevant
exposure limit(s). Workplace risk assessment should be completed before specifying and implementing
RPE usage. Potential exposure points and pathways, task duration and frequency, potential employee
contact with the substance, and the ability of the substance to be rendered airborne during specific tasks
should be evaluated. Initial and ongoing strategies of quantitative exposure measurement should be
obtained as required by the workplace risk assessment. All RPE must conform to local and regional
specifications for efficacy and performance.
Eye Protection: Safety glasses with side shields. Use of goggles or full face protection may be required based on hazard,
potential for contact, or level of exposure.
effectiveness of engineering controls. Site-specific risk assessments should be conducted to determine the feasibility and the appropriateness of all
exposure control measures. Exposure controls for normal operating or routine procedures follow a tiered strategy. Engineering controls are the
preferred means of long-term or permanent exposure control. If engineering controls are not feasible, appropriate use of personal protective equipment
(PPE) may be considered as alternative control measures. Exposure controls for non-routine operations must be evaluated and addressed as part of
the site-specific risk assessment.
RECOMMENDED PERSONAL PROTECTIVE EQUIPMENT (PPE):
Body Protection: In small-scale or laboratory operations, lab coats or equivalent protection is required. Disposable Tyvek or
other dust impermeable suit should be considered based on procedure or level of exposure. Use of
additional PPE such as shoe coverings, gauntlets, hood, or head covering may be necessary. Consult
your site safety staff for guidance.
In large-scale or manufacturing operations, disposable Tyvek or other dust impermeable suit is
recommended and based on level of exposure. Use of additional PPE such as shoe coverings, gauntlets,
hood, or head covering may be necessary. Consult your site safety staff for guidance.
Skin Protection: Gloves that provide an appropriate barrier to the skin are recommended if there is potential for contact with
this material. Consult your site safety staff for guidance.
Respiratory Protection: Respiratory protective equipment (RPE) may be required for certain laboratory and large-scale
manufacturing tasks if potential airborne breathing zone concentrations of substances exceed the relevant
exposure limit(s). Workplace risk assessment should be completed before specifying and implementing
RPE usage. Potential exposure points and pathways, task duration and frequency, potential employee
contact with the substance, and the ability of the substance to be rendered airborne during specific tasks
should be evaluated. Initial and ongoing strategies of quantitative exposure measurement should be
obtained as required by the workplace risk assessment. All RPE must conform to local and regional
specifications for efficacy and performance.
Eye Protection: Safety glasses with side shields. Use of goggles or full face protection may be required based on hazard,
potential for contact, or level of exposure.
Stability and reactivity
Danger other than fire: None known.
Chemical reaction with water: None which is hazardous.
Dust explosion: Under normal conditions of use this material does not
present a significant explosion hazard. However, like most
organic compounds it is combustible and may form a dust
explosion if widely dispersed in air.
Dust explosion determined by test: N
Chemical reaction with water: None which is hazardous.
Dust explosion: Under normal conditions of use this material does not
present a significant explosion hazard. However, like most
organic compounds it is combustible and may form a dust
explosion if widely dispersed in air.
Dust explosion determined by test: N
Disposal considerations
Industry - Possibility of recovery/recycling: There will be no discharge to the environment. Recovery from
minor spillages or accidental discharge is not economically
or technically feasible, and such waste material will be
disposed of by incineration. In principle, it may be
possible to recover larger spillages of uncontaminated
material for subsequent use.
Industry - Possibility of neutralisation: The tests submitted in support of this notification have
shown that the substance is acutely toxic by oral exposure.
No chemical treatment is practicable to neutralise the
hazardous health properties.
The dust hazard will be minimised by appropriate storage and
handling methods.
The substance is very toxic to aquatic organisms and may
cause long term adverse effects in the environment.
Industry - Possibility of destruction: controlled discharge: Contaminated containers or spillages of solutions mixed with
inert material (eg sand or soil) should not normally be
disposed of by landfill.
Industry - Possibility of destruction - incineration: The substance can be disposed of by incineration by burning
under controlled conditions at a licensed waste treatment
processor in accordance with local regulations. Stack gases
should be scrubbed, because noxious fumes could be formed.
Industry - Possibility of destruction - water purification: The substance should not be discharged directly to the
sewage system or the aqueous environment. However,
adverse effects on sewage treatment systems would be
unlikely.
Industry - Possibility of destruction - other: None.
Public at large - Possibility of recovery/recycling: Not applicable.
Public at large - Possibility of neutralisation: Not applicable.
Public at large - Possibility of destruction: controlled discharge: Not applicable.
Public at large - Possibility of destruction - incineration: Not applicable.
Public at large - Possibility of destruction - water purification: Not applicable.
Public at large - Possibility of destruction - others: Not applicable.
minor spillages or accidental discharge is not economically
or technically feasible, and such waste material will be
disposed of by incineration. In principle, it may be
possible to recover larger spillages of uncontaminated
material for subsequent use.
Industry - Possibility of neutralisation: The tests submitted in support of this notification have
shown that the substance is acutely toxic by oral exposure.
No chemical treatment is practicable to neutralise the
hazardous health properties.
The dust hazard will be minimised by appropriate storage and
handling methods.
The substance is very toxic to aquatic organisms and may
cause long term adverse effects in the environment.
Industry - Possibility of destruction: controlled discharge: Contaminated containers or spillages of solutions mixed with
inert material (eg sand or soil) should not normally be
disposed of by landfill.
Industry - Possibility of destruction - incineration: The substance can be disposed of by incineration by burning
under controlled conditions at a licensed waste treatment
processor in accordance with local regulations. Stack gases
should be scrubbed, because noxious fumes could be formed.
Industry - Possibility of destruction - water purification: The substance should not be discharged directly to the
sewage system or the aqueous environment. However,
adverse effects on sewage treatment systems would be
unlikely.
Industry - Possibility of destruction - other: None.
Public at large - Possibility of recovery/recycling: Not applicable.
Public at large - Possibility of neutralisation: Not applicable.
Public at large - Possibility of destruction: controlled discharge: Not applicable.
Public at large - Possibility of destruction - incineration: Not applicable.
Public at large - Possibility of destruction - water purification: Not applicable.
Public at large - Possibility of destruction - others: Not applicable.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
