Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

General advice:

Immediately remove contaminated clothing. If the patient is likely to become unconscious, place and

transport in stable sideways position (recovery position). First aid personnel should pay attention to

their own safety. Obtain medical attention.

If inhaled:

Keep patient calm, remove to fresh air. Immediate medical attention required.

On skin contact:

Immediately wash thoroughly with plenty of water, apply sterile dressings, consult a skin specialist.

On contact with eyes:

Immediately wash affected eyes for at least 15 minutes under running water with eyelids held open,

consult an eye specialist.

On ingestion:

Rinse mouth and then drink plenty of water. Immediate medical attention required. Do not induce

vomiting unless told to by a poison control center or doctor.

Note to physician:

Treatment: Treat according to symptoms (decontamination, vital functions), no known specific

antidote. Pulmonary odema prophylaxis. Inhale corticosteroid dose aerosol.

Fire-fighting measures

Suitable extinguishing media:

water spray, dry extinguishing media, foam, carbon dioxide

Specific hazards:

hydrogen chloride, carbonyl chloride

The substances/groups of substances mentioned can be released in case of fire.

Special protective equipment:

Wear self-contained breathing apparatus and chemical-protective clothing.

Further information:

The degree of risk is governed by the burning substance and the fire conditions. Dispose of fire debris

and contaminated extinguishing water in accordance with official regulations.

Accidental release measures

Personal precautions:

Personal protection: wear a tightly closed chemical protection suit and a self-contained breathing


Environmental precautions:

Do not discharge into drains/surface waters/groundwater. Discharge into the environment must be


Methods for cleaning up or taking up:

For small amounts: Pick up with suitable absorbent material. Dispose of absorbed material in

accordance with regulations.

For large amounts: Pump off product.

Handling and storage


Ensure thorough ventilation of stores and work areas. Refill and handle product only in closed system.

Protect against heat. Avoid contact with the skin, eyes and clothing.

Protection against fire and explosion:

Prevent electrostatic charge - sources of ignition should be kept well clear - fire extinguishers should

be kept handy. Vapours may form explosive mixture with air.


Further information on storage conditions: Keep container tightly closed and in a well-ventilated place.

Protect against moisture. Protect against heat.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Personal protective equipment

Respiratory protection:

Self-contained breathing apparatus.

Hand protection:

Chemical resistant protective gloves (EN 374)

Suitable materials also with prolonged, direct contact (Recommended: Protective index 6,

corresponding > 480 minutes of permeation time according to EN 374):

fluoroelastomer (FKM) - 0.7 mm coating thickness

Supplementary note: The specifications are based on own tests, literature data and information of

glove manufacturers or are derived from similar substances by analogy. Due to many conditions (e.g.

temperature) it must be considered, that the practical usage of a chemical-protective glove in practice

may be much shorter than the determined permeation time.

Manufacturer's directions for use should be observed because of great diversity of types.

Eye protection:

Tightly fitting safety goggles (splash goggles) (f.e. EN 166)

Body protection:

Body protection must be chosen depending on activity and possible exposure, e.g. apron, protecting

boots, chemical-protection suit (according to DIN-EN 465).

General safety and hygiene measures:

Wearing of closed work clothing is required additionally to the stated personal protection equipment.

Stability and reactivity

Disposal considerations