Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

Endpoint:
vapour pressure
Type of information:
experimental study
Adequacy of study:
key study
Study period:
27 May 2010 - 3 June 2010
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
other: The study was performed according to guideline

Data source

Reference
Reference Type:
study report
Title:
Unnamed
Year:
2010
Report date:
2010

Materials and methods

Test guideline
Qualifier:
according to guideline
Guideline:
EU Method A.4 (Vapour Pressure)
Deviations:
no
GLP compliance:
yes (incl. QA statement)
Type of method:
effusion method: vapour pressure balance

Test material

Constituent 1
Chemical structure
Reference substance name:
Zinc bis[O,O-bis(2-ethylhexyl)] bis(dithiophosphate)
EC Number:
224-235-5
EC Name:
Zinc bis[O,O-bis(2-ethylhexyl)] bis(dithiophosphate)
Cas Number:
4259-15-8
Molecular formula:
Too complex
IUPAC Name:
1-Hexanol, 2-ethyl-, O,O-diester with phosphorodithioic acid, zinc salt
Details on test material:
- Substance type: a mixture of coordination compounds in oil consisting of a zinc metal complex bonded to alkyldithiophosphate ligands.

Results and discussion

Vapour pressureopen allclose all
Temp.:
25 °C
Vapour pressure:
0 Pa
Remarks on result:
other: extrapolated from plot of logPa vs. 1/K; quantity of vapour generated between 0 - 50 C was too low to measure
Temp.:
50 °C
Vapour pressure:
0.005 Pa
Remarks on result:
other: extrapolated from plot of logPa vs. 1/K; quantity of vapour generated between 0 - 50 C was too low to measure
Temp.:
70 °C
Vapour pressure:
0.024 Pa
Remarks on result:
other: 70 deg. C is the maximum use temperature of the substance

Any other information on results incl. tables

A total of 5 runs were recorded. A summary of the results is shown in Table 1 below. Raw data including temperature, mass, and pressure measurements for each of the runs are shown in attached Figures 1 - 5.

Table 1. Summary of Vapour Pressure Measurements

Run #

Vapour Pressure Values

25 C

50 C

70 C

1

-3.406

-2.344255

-1.609362

2

-3.183

-2.210785

-1.534883

3

-3.277

-2.278625

-1.584956

4

-3.497

-2.425791

-1.691464

5

-3.498

-2.434100

-1.694826

Mean logPa

-3.3722

-2.338711

-1.623098

Mean Pa

0.0004244

0.0045845

0.0238178

Mean kPa

4.2442E-07

4.5845E-06

2.3818E-05

Applicant's summary and conclusion

Conclusions:
The vapour pressure of the substance is 0.00042 Pa at 25 degrees C.
Executive summary:

The vapour pressure of the test substance was determined using the vapour pressure balance method following EU Method A.4 guidelines. Measurements were taken between temperatures of 105 - 115 degrees C.  This range of temperatures was selected because the quantity of vapor generated was too low to measure in the range of 0 - 50 degrees C.

 

A plot of logPa vs. 1/K was generated from the experimental measurements from which the vapour pressure at 25 and 50 degrees C was extrapolated.

 

The vapour pressure of the test substance (based on five replicate measurements) is:

 

0.00042 Pa at 25 deg. C

0.0046 Pa at 50 deg. C

 

The substance did not show a change in appearance under the conditions used in the determination.