Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

General advice


Move out of dangerous area.
Consult a physician.
Treat symptomatically.
Get medical attention if symptoms occur.



Protection of first-aiders


First Aid responders should pay attention to self-protection
and use the recommended protective clothing.
Avoid inhalation, ingestion and contact with skin and eyes.
No action shall be taken involving any personal risk or without
suitable training.
It may be dangerous to the person providing aid to give
mouth-to-mouth resuscitation.



If inhaled


If inhaled, remove to fresh air.
Get medical attention if symptoms occur.


In case of skin contact


Immediate medical treatment is necessary as untreated
wounds from corrosion of the skin heal slowly and with
difficulty.
If on skin, rinse well with water.
If on clothes, remove clothes.



In case of eye contact 


Small amounts splashed into eyes can cause irreversible
tissue damage and blindness.
In the case of contact with eyes, rinse immediately with plenty
of water and seek medical advice.
Continue rinsing eyes during transport to hospital.
Remove contact lenses.
Keep eye wide open while rinsing.
If eye irritation persists, consult a specialist.



If swallowed


Clean mouth with water and drink afterwards plenty of water.
Keep respiratory tract clear.
Do NOT induce vomiting.
Never give anything by mouth to an unconscious person.
If symptoms persist, call a physician.
Take victim immediately to hospital.



Most important symptoms and effects, both acute and delayed
None known.



Indication of any immediate medical attention and special treatment needed
Treatment : Treat symptomatically.

Fire-fighting measures

Suitable extinguishing media 


Water spray
Alcohol-resistant foam
Carbon dioxide (CO2)
Dry chemical


 


Unsuitable extinguishing media 


Exercise caution when using a high volume water jet as it may
scatter and spread fire


 


Specific hazards during firefighting 


Do not allow run-off from fire fighting to enter drains or water courses.


 


Hazardous combustion products 


Carbon oxides


Nitrogen oxides (NOx)


 


Special protective equipment for firefighters 


In the event of fire, wear self-contained breathing apparatus.


 


Specific extinguishing methods 


Use extinguishing measures that are appropriate to local
circumstances and the surrounding environment


 


Further information 


Collect contaminated fire extinguishing water separately. This must not be discharged into drains. Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations.

Accidental release measures

Personal precautions :


Use personal protective equipment.


 


Environmental precautions :


Prevent product from entering drains.


Prevent further leakage or spillage if safe to do so.


If the product contaminates rivers and lakes or drains inform respective authorities.


 


Methods for cleaning up :


Neutralise with acid.


Soak up with inert absorbent material (e.g. sand, silica gel,


acid binder, universal binder, sawdust).


Keep in suitable, closed containers for disposal.

Handling and storage

Advice on safe handling :


Do not breathe vapours/dust.


Avoid contact with skin and eyes.


Smoking, eating and drinking should be prohibited in the application area.


To avoid spills during handling keep bottle on a metal tray.


Dispose of rinse water in accordance with local and national regulations.


 


Advice on protection against fire and explosion :


Normal measures for preventive fire protection.


 


Hygiene measures :


When using do not eat or drink. When using do not smoke. Wash hands before breaks and at the end of workday.


 


Requirements for storage areas and containers :


Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Observe label precautions. Keep in properly labelled containers.


 


Advice on common storage :


Do not store near acids.


 


Further information on storage stability :


Stable under normal conditions.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
UN 2735
Shipping information
Proper shipping name and description:
Amines, liquid, corrosive, n.o.s.
Chemical name:
(1-(BIS(3-(DIMETHYLAMINO)PROPYL)AMINO)-2-PROPANOL)
Class or division:
Class 8: Corrosive substances
Packing group:
Packing group III: Substances presenting low danger
Labels:
8
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
UN 2735
Shipping information
Proper shipping name and description:
Amines, liquid, corrosive, n.o.s.
Chemical name:
(1-(BIS(3-(DIMETHYLAMINO)PROPYL)AMINO)-2-PROPANOL)
Class or division:
Class 8: Corrosive substances
Packing group:
Packing group III: Substances presenting low danger
EmS code:
F-A
S-B
Labels:
8
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
UN 2735
Shipping information
Proper shipping name and description:
Amines, liquid, corrosive, n.o.s.
Chemical name:
(1-(BIS(3-(DIMETHYLAMINO)PROPYL)AMINO)-2-PROPANOL)
Class or division:
Class 8: Corrosive substances
Packing group:
Packing group III: Substances presenting low danger
Labels:
8
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Eye protection :


Eye wash bottle with pure water
Tightly fitting safety goggles
Wear face-shield and protective suit for abnormal processing
problems.



Hand protection
Remarks : Chemical-resistant, impervious gloves complying with an
approved standard should be worn at all times when handling
chemical products if a risk assessment indicates this is
necessary. The suitability for a specific workplace should be
discussed with the producers of the protective gloves.



Skin and body protection :


Impervious clothing
Choose body protection according to the amount and
concentration of the dangerous substance at the work place.



Respiratory protection : No personal respiratory protective equipment normally
required.

Stability and reactivity

Reactivity
No dangerous reaction known under conditions of normal use.


Chemical stability
Stable under normal conditions.


Possibility of hazardous reactions
Hazardous reactions : No hazards to be specially mentioned.



Conditions to avoid


None known.



Incompatible materials
Materials to avoid : Incompatible with acids.
Isocyanates



Hazardous decomposition products
No decomposition if stored and applied as directed.

Disposal considerations

Waste treatment methods
Product : Dispose of contents and container in accordance with all local,
regional, national and international regulations.
Do not dispose of waste into sewer.
Do not contaminate ponds, waterways or ditches with
chemical or used container.


Contaminated packaging : Empty remaining contents.
Dispose of as unused product.
Do not re-use empty containers.