plastic-material-food-contact

FCM and Articles Regulation, Annex I - Authorised Substances

EU. Union List of Authorized Substances: Annex I, Plastics Food Contact Regulation 10/2011/EU, as amended by Regulation (EU) 2023/1627, OJ L 201, 11 August 2023

This list contains the Union list of authorised monomers, other starting substances, macromolecules obtained from microbial fermentation, additives and polymer production aids. It is taken from Annex I of the Commission Regulation (EU) No 10/2011 on plastic materials and articles intended to come into contact with food.

Last updated 28 March 2024. Database contains 1080 unique substances/entries.
Filter the list

 
204-019-7
112-96-9
274
22570
no
no
1 mg/kg in final product expressed as isocyanate moiety.
Details
233-226-5
10094-45-8
587
68400
yes
yes
5 mg/kg
Details
206-103-9
301-02-0
335
68960
yes
no
Details
204-007-1
112-80-1
270
22763
69040
yes
no
Details
205-597-3
143-28-2
332
69760
yes
no
Details
240-367-6
16260-09-6
622
69840
yes
yes
5 mg/kg
Details
205-634-3
144-62-7
333
22775
69920
yes
no
6 mg/kg
Details
618-355-0
9003-11-6
551
79920
yes
no
Details
680-864-9
12198-93-5
602
70240
yes
no
Details
203-398-6
106-44-5
216
14770
no
no
Details
271-867-2
68610-51-5
732
45450
yes
yes
5 mg/kg
Details
202-804-9
99-96-7
190
18880
no
no
Details
200-312-9
57-10-3
105
22780
70400
yes
no
Details
203-829-8
111-06-8
258
70480
yes
no
Details
206-765-9
373-49-9
338
71020
yes
no
Details
232-553-0
9000-69-5
546
71440
yes
no
Details
204-104-9
115-77-5
279
22840
71600
yes
no
Details
246-665-2
25151-96-6
637
71635
yes
no
0.05 mg/kg
Not to be used for articles in contact with fatty foods for which simulant D1 and/or D2 is laid down.
Details
429-160-3
178671-58-4
778
71670
yes
yes
0.05 mg/kg
Details
229-722-6
6683-19-8
496
71680
yes
no
Details
203-692-4
109-66-0
244
71720
yes
no
Details
623-712-9
14797-73-0
822
71938
yes
no
Details
-
-
822
71938
yes
no
Details
682-234-9
329238-24-6
854
71943
yes
no
Only to be used in concentrations up to 0,5 % w/w in the polymerisation of fluoropolymers that are processed at temperatures at or above 340 °C and are intended for use in repeated use articles.
Details
700-323-3
908020-52-0
926
71955
yes
no
Only to be used in the polymerisation of fluoropolymers that are processed at temperatures higher than 300 °C for at least 10 minutes.
Details
236-236-8
13252-13-6
861
71990
yes
no
Only to be used in the polymerisation of fluoropolymers that are processed at temperatures at or above 265 °C and are intended for use in repeated use articles.
Details
680-272-0
51798-33-5
860
71980
yes
no
Only to be used in the polymerisation of fluoropolymers that are processed at temperatures at or above 265 °C and are intended for use in repeated use articles.
Details
214-703-7
1187-93-5
391
22932
no
no
0.05 mg/kg
Only to be used in: anti-stick coatings; fluoro- and perfluoropolymers intended for repeated use applications where the contact ratio is 1 dm2 surface in contact with at least 150 kg food.
Details
223-320-4
3825-26-1
468
71960
yes
no
Only to be used in repeated use articles, sintered at high temperatures.
Details
216-600-2
1623-05-8
423
22937
no
no
0.05 mg/kg
Details
682-238-0
1190931-27-1
1045
yes
no
Only to be used as a polymer production aid during the manufacture of fluoropolymers under high temperature conditions of at least 370 °C.
Details
-
-
97
72081/10
yes
no
Petroleum hydrocarbon resins, hydrogenated are produced by the catalytic or thermalpolymerisation of dienes and olefins of the aliphatic, alicyclic and/or monobenzenoidarylalkene types from distillates of cracked petroleum stocks with a boiling range not greater than 220 °C, as well as the pure monomers found in these distillation streams, subsequently followed by distillation, hydrogenation and additional processing.
Properties: Viscosity at 120 °C: > 3 Pa.s,Softening point: > 95 °C as determined by ASTM Method E 28-67,Bromine number: < 40 (ASTM D1159),The colour of a 50 % solution in toluene < 11 on the Gardner scale,Residual aromatic monomer ≤ 50 ppm.
Details
203-632-7
108-95-2
241
22960
no
no
3 mg/kg
Details
231-633-2
7664-38-2
509
23170
72640
yes
no
Details
214-987-2
1241-94-7
392
72800
yes
yes
2.4 mg/kg
Details
258-053-2
52628-03-2
1082
no
no
0.05 mg/kg
Only to be used at up to 0,35 % (w/w) to manufacture polymethylmethacrylate.
Details
-
-
68
73160
yes
yes
0.05 mg/kg
Details
204-118-5
115-96-8
280
73720
yes
no
0.01 mg/kg
Details
IRGAFOS 38
416-140-4
145650-60-8
769
74010
yes
yes
5 mg/kg
SML expressed as sum of phosphite and phosphate.
Details
700-485-5
939402-02-5
974
74050
yes
yes
10 mg/kg
SML expressed as the sum of the phosphite and phosphate forms of the substance, 4-tert-amylphenol and 2,4-di-tert-amylphenol.
Details
700-485-5
939402-02-5
974
74050
yes
yes
1 mg/kg
The migration of 2,4-di-tert-amylphenol shall not exceed 1 mg/kg food.
Details
204-552-5
122-52-1
293
23175
no
no
0.01 mg/kg
1 mg/kg in final product.
Details
843-672-8
1227937-46-3
1076
yes
no
0.05 mg/kg
Only to be used (a)as an additive at up to 0.2 % w/w in high impact polystyrene materials and articles intended for contact with food at room temperature and below, including hot-fill and/or heating up to 100 ° C for up to 2 hours. It shall not be used in contact with foods for which simulant C and/or D1 is assigned in Annex III; (b)as an additive at up to 0.025 % w/w in acrylonitrile-butadiene-styrene (ABS) materials for use at room temperature and below.
Details
250-709-6
31570-04-4
671
74240
yes
no
Details
-
-
69
74400
yes
yes
30 mg/kg
Details
201-873-2
88-99-3
192
23187
no
no
Details
201-873-2
88-99-3
165
23200
74480
yes
no
Details
201-622-7
85-68-7
159
74560
yes
no
Only to be used as: (a)plasticiser in repeated use materials and articles;(b)plasticiser in single-use materials and articles contacting non-fatty foods except for infant formulae and follow-on formulae;(c)technical support agent in concentrations up to 0,1 % in the final product.
Details
201-622-7
85-68-7
159
74560
yes
no
6 mg/kg
Only to be used as: (a)plasticiser in repeated use materials and articles;(b)plasticiser in single-use materials and articles contacting non-fatty foods except for infant formulae and follow-on formulae;(c)technical support agent in concentrations up to 0,1 % in the final product.
Details
201-622-7
85-68-7
159
74560
yes
no
Only to be used as: (a)plasticiser in repeated use materials and articles;(b)plasticiser in single-use materials and articles contacting non-fatty foods except for infant formulae and follow-on formulae;(c)technical support agent in concentrations up to 0,1 % in the final product.
Details

Export search results to: