Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

General Advice:
If symptoms persist, call a physician.Show this safety data sheet to the doctor in attendance.
- Inhalation:
Not hazardous by inhalation.
Move to fresh air.
If not breathing, give artificial respiration.
Immediate medical attention is required.
- Eye Contact:
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes.
If symptoms persist, call a physician.
- Skin Contact:
Wash off immediately with soap and plenty of water while removing all contaminated clothes and shoes.
If skin irritation persists, call a physician.
- Ingestion:
Not hazardous

Fire-fighting measures

- Suitable Extinguishing Media: No materials to be especially mentioned
- Extinguishing media which must not be used for safety reasons: None
- Specific methods:
Evacuate personnel to safe areas
Cool containers / tanks with water spray.
Do not flush into surface water or sanitary sewer system.
Keep product and empty container away from heat and sources of ignition.
- Special protective equipment for firefighters:
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear.
- Specific hazards:
Non-combustible.
Heating can release hazardous gases.

Accidental release measures

- Personal Precautions:
Wear suitable protective equipment.
Avoid contact with skin, eyes and clothing.
Evacuate personnel to safe areas.
Keep people away from and upwind of spill/leak.
- Environmental Precautions:
Should not be released into the environment.
Remove immediately adhering matter.
Prevent product from entering drains.
Do not flush into surface water or sanitary sewer system.
- Methods for Clean-up:
Absorb spill with inert material (e.g. dry sand or earth), then place in a chemical waste container.
Take up mechanically and collect in suitable container for disposal.

Handling and storage

HANDLING
- Technical measures/Precautions:
In accordance with local and national regulations
Ensure adequate ventilation
- Safe Handling Advice:
Handle in accordance with good industrial hygiene and safety practice
No special handling advice required
STORAGE
- Technical measures/Precautions:
In accordance with local and national regulations.
Keep containers tightly closed in a dry, cool and well-ventilated place.
No special handling advice required.
- Incompatible products: No information available.
- Specific use(s):
Dispose of as special waste in compliance with local and national regulations
Keep at temperatures between -5 and 40 °C

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

EXPOSURE CONTROLS
- Engineering Controls: Local exhaust.
PERSONAL PROTECTION
- Eye/face Protection:
Tightly fitting safety goggles.
Face-shield.
Chemical resistant goggles must be worn.
- Hand Protection:
Neoprene gloves.
Choose body protection according to the amount and concentration of the dangerous substance at the work place.
Rubber gloves.
Impervious gloves.
- Respiratory Protection:
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear.
- Skin Protection:
Wear suitable protective equipment.
Choose body protection according to the amount and concentration of the dangerous substance at the work place.
Apron.
Boots.
- Environmental exposure controls
Prevent product from entering drains.
Do not contaminate surface water.
Avoid subsoil penetration.

Stability and reactivity

- Conditions to avoid: Stable under normal conditions.
- Materials to avoid: No materials to be especially mentioned.
- Hazardous Decomposition Products: None under normal processing.

Disposal considerations

- Waste from Residues / Unused Products:
Dispose of in accordance with local regulations.
Waste codes should be assigned by the user based on the application for which the product was used.
- Contaminated Packaging:
Empty containers should be taken for local recycling, recovery or waste disposal.