Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 417-640-5 | CAS number: 161935-19-9 NAVY DER 7850
Guidance on Safe Use
Administrative data
First-aid measures
Emergency measure - Inhalation: - Move exposed person to fresh air. In case of indisposition
seek medical advice.
Emergency measure - Eyes: - Rinse with plenty of water. If irritation occurs, seek
medical advice.
Emergency measure - Skin: - Wash with soap and water.
Emergency measure - Ingestion: - Symptomatic treatment. In case of indisposition seek
medical advice.
Fire-fighting measures
Recommended extinguishing agent: - Water, dry powder, foam, carbon dioxide.
Product arising from burning: - CO, CO2, NOx, SO2 and other toxic gases
Product determined by test: N
Protective equipment: - Wear self-contained breathing apparatus.
Accidental release measures
Emergency measures in case of spillage: - Wear protective clothing (dust mask, safety goggles and
impermeable gloves).
Solids: Sweep up (wet powders with water) and place in
suitable containers for disposal.
Liquids: Absorb using an adequate absorbent (eg. kiesel-
guhr, sand, saw dust, kieselgel), collect and
place in suitable containers for disposal.
Dispose of waste material in authorised incineration
facility.
Handling and storage
Handling: - Observe the usual precautions for handling chemicals. If
the substance is handled as powder, avoid skin contact and
inhalation of dust and wear impermeable gloves and dust
mask. Use equipment for handling powders or other approp-
riate engineering controls.
Take precautionary measures against static discharges.
Storage: - The substance should be stored in well sealed and secure
containers in adequate rooms at room temperature.
Avoid dust residue outside the containers.
Packaging of the substance and or preparation: - 20 or 30 kg (net) fiber drums
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
Shippingopen allclose all
Special provisions / remarks
- Remarks:
- Transport code: - Not classified
Transport: - Transport in well sealed suitable containers (eg. poly-
ethylene sacks in fiber drums). The containers should be
secured against falling down.
Label containers in accordance with pertinent regulations.
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Stability and reactivity
Danger other than fire: - None known.
Chemical reaction with water: - Stepwise reaction of FAT 40'530/A with water to a vinyla-
ted product in a first step and to a hydrolysed product
of the vinylated form in a second step.
Dust explosion: - Not to be expected if handled under good industrial hygie-
ne practices.
Dust explosion determined by test: N
Disposal considerations
Industry - Possibility of recovery/recycling: - Normal application results in the consumption of approx.
88 % (exhausting procedure) by irreversible binding to
the textile fibres.
Recovery for recycling of the remaining substance is not
reasonably practicable.
Industry - Possibility of neutralisation: - No hazardous effect known, therefore not applicable.
Industry - Possibility of destruction: controlled discharge: - Not suitable for deposit in landfill site.
Industry - Possibility of destruction - incineration: - Code 661; incinerator with flue gas scrubbing
Discharge by incineration at high temperatures (>800°C)
in a suitable facility with the equipment necessary to
remove oxides of sulfur and nitrogen.
Industry - Possibility of destruction - water purification: - Code 641; removal by controlled discharge to a waste water
treatment plant
It is estimated that approx. 12 % of the total quantity
used is discharged into internal industrial effluents as
highly diluted solution. A purification of the waste
water in a waste water treatment plant is recommended.
The dyestuff should be used in a well equipped dye house.
The waster water can be purified by membrane filtration
or by floculation with cationic agents or by treatment
with ozone. The most effective method is the membrane fil-
tration: more than 99% of the remaining dyestuff can be
removed from the waste water.
Industry - Possibility of destruction - other: - None.
Public at large - Possibility of recovery/recycling: - Not applicable.
Public at large - Possibility of neutralisation: - Not applicable.
Public at large - Possibility of destruction: controlled discharge: - Not applicable.
Public at large - Possibility of destruction - incineration: - Not applicable.
Public at large - Possibility of destruction - water purification: - Not applicable.
Public at large - Possibility of destruction - others: - Not applicable.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
