Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 310-061-8 | CAS number: 102110-60-1 A product obtained by the treatment of battery scraps to recover lead. Composed primarily of oxides and sulfates of antimony and lead.
Endpoint summary
Administrative data
Description of key information
Additional information
Substance: Slimes and sludges battery scrap antimony and lead rich
“Slimes and sludges battery scrap antimony and lead rich are made by aqueous alkaline leaching of the majority of the sulphate from the lead-containing material recovered from recycled lead-acid batteries. The lead is mainly present as carbonates. Also other lead compounds, such as lead oxides, lead sulphate and lead silicate, and lead in metallic form may be present.” |
|
EC number/ EINECS No. |
CAS No. |
310-061-8 |
102110-60-1 |
Slimes and sludges battery scrab (Sb, Pb rich) is a brown, odourless solid (at 20°C and 101.3 kPA) in the form of sludge. The density will vary according to the precise composition of the sample. The density of the tested sample was 6.64 g/cm3. The melting point is shown to be > 500°C. Consequently, boiling point and vapour pressure cannot be determined. The water solubility test shows dissolution of metal ions. Two samples were tested for granulometry, a D50 = 39 micrometer and < 20 micrometer were determined. Both the results of the water solubility test and the granulometry test should be used with caution.
There is no evidence of physical hazards in terms of (auto)flammability, explosivity and oxidizing properties.
Studies regarding flash point, partition coefficient and surface tension do not need to be conducted.
Waivers are in place for all these endpoints.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
