Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 273-574-5 | CAS number: 68990-02-3
Guidance on Safe Use
Administrative data
First-aid measures
· 4.1 Description of first aid measures:
· After inhalation:
Supply fresh air. If symptoms are experienced, get medical attention.
In case of unconsciousness place patient stably in side position for transportation.
· After skin contact:
Product at ambient temperature:
Immediately rinse with plenty of water. Remove contaminated clothing and shoes. Wash clothing before reuse. Clean
shoes thoroughly before reuse. Get medical attention if irritations occurs.
Hot product:
Immediately immerse or flush the burn area with large amounts of cold water (at least 15 minutes). Do not remove
solidified material from burned skin as the damaged skin can be easily torn. Transfer immediately to hospital.
· After eye contact:
Product at ambient temperature:
Immediately rinse with water. Remove contact lenses if present and easy to do. Hold eyelids apart and flush eyes with
plenty of cool low-pressure water for several minutes. Il symptoms persist, consult a doctor.
Hot product:
Do not open eyelids if covered with resins. Immediately flush eyes with large amounts of water for at least 15 minutes.
Do not remove solidified material from burned eye as the damaged tissues can be easily torn. Transfer immediately to
hospital.
· After swallowing:
Do not induce vomiting. If the person is conscious, immediately rinse out mouth with water.
- No adverse health effects are expected from accidental ingestion of small amounts of this product. In case of lasting
symptoms, consult a doctor.
- For ingestion of large amounts: do not induce vomiting and get medical attention.
· 4.3 Indication of any immediate medical attention and special treatment needed
For doctors: Mineral oil may be used to loosen and soften the material.
Fire-fighting measures
· 5.1 Suitable extinguishing agents: CO2, powder or water spray. Fight larger fires with water spray or foam.
· For safety reasons unsuitable extinguishing agents:
High pressure media which could cause the formation of a potentially explosible dust-air mixture).
· 5.2 Special hazards arising from the substance or mixture: In case of fire, may release irritant and toxic fumes.
· 5.3 Advice for firefighters:
· Protective equipment:
Firefighters should wear appropriate protective equipment and self-contained breathing apparatus.
· Additional information: Cool endangered receptacles with water spray.
Accidental release measures
· 6.1 Personal precautions, protective equipment and emergency procedures
Wear appropriate personal protective equipment. Keep unprotected persons away.
Provide adequate ventilation.
Avoid dust formation.
· 6.2 Environmental precautions
Do not allow product to reach soil, waterways, drains and sewers.
Inform the relevant authorities if the product has caused environmental pollution (soil, waterways, drains or sewers).
· 6.3 Methods and material for containment and cleaning up
Pick up mechanically.
Avoid as much as you can the formation of dust.
Collect and seal in an appropriate container properly labelled for disposal.
Handling and storage
· 7.1 Precautions for safe handling:
Wear appropriate personal protective equipment. Provide adequate ventilation in the workplace.
Avoid as much as you can the formation of dust.
Provide suction extractors if dust is formed.
· Information about fire - and explosion protection:
Protect against electrostatic charges.
Use only non-sparking tools.
Keep ignition sources away.
Protect from heat.
Do not use compressed air and do not blow to remove resin dusts when cleaning the working cloths or equipments.
Local suctions extractor can be used (if an appropriate maintenance is carried out).
· 7.2 Conditions for safe storage:
Store if possible under cover in a dry, cool and well-ventilated area.
Provide storage areas with suitable ventilation to eliminate dust.
Avoid dust formation close to sources of ignition.
Protect from heat and direct sunlight.
All equipments including ventilation systems must be equipotential and earthed.
· Recommended storage temperature: Store at a temperature between 5 and 30°C.
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Stability and reactivity
Disposal considerations
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
