Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

Eyes: Immediately flush eyes with copious quantities of water for at least 15 minutes holding lids apart to ensure flushing of the entire surface. Seek medical attention if irritation persists.

Skin: Wash off immediately with soap and plenty of water while removing all contaminated clothes and shoes. Seek medical attention if irritation persists. Launder contaminated clothing before reuse.

Ingestion: Do not induce vomiting. Never give anything by mouth to an unconscious person. Drink plenty of water. Rinse mouth with water. Seek medical attention. If possible drink milk afterwards.

Inhalation: If breathed in, remove from exposure and move the person to fresh air. If symptoms persist, call a physician.

Fire-fighting measures

Extinguishing Media: Foam, dry chemical or carbon dioxide. Water can be used to cool and protect exposed material. Not combustible.

Fire Fighting Equipment/Instructions: Wear self-contained breathing apparatus for firefighting if necessary.

Treat as an oil fire. Water may cause splattering.

Accidental release measures

Containment Procedures: Prevent entry into sewers and waterways.

Clean-up Procedures: Pick up free liquid for recycle and/or disposal. Residual liquid can be absorbed on inert material.

Special Procedures: Personal protective equipment must be worn. Ventilate area if spilled in a confined space or other poorly ventilated area.

Handling and storage

Handling Procedures:  Keep containers closed when not in use. Mix well before using. Wash thoroughly after handling. Launder contaminated clothing before reuse. Empty container contains product residue which may exhibit hazards of product. Dispose of packing or containers in accordance with local, regional, national and international regulations.

Storage Procedures: Keep in a dry, cool place.

Specific end use(s): End uses are listed in an attached exposure scenario when one is required.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
Not Dangerous Goods
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
Not Dangerous Goods
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
Not Dangerous Goods
Shippingopen allclose all
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
Not Dangerous Goods
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Control of dermal exposure: Handle with nitrile gloves, coveralls, apron, boots as necessary to minimize contact. Gloves should be inspected prior to use. Use proper glove removal technique to avoid skin contact. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices.  

Control of eye/face exposure: Safety eyewear complying with an approved standard should be used when a risk assessment indicates this is necessary to avoid exposure to liquid splashes, mists, gases or dusts.

Control of inhalation exposure: No personal respiratory protective equipment normally required.  In case of insufficient ventilation, wear suitable respiratory equipment.

General: Wash thoroughly after handling this product Eye wash fountain and emergency showers are recommended.

Control of environmental exposure: Do not let product enter intro sewers and waterways.

Stability and reactivity

Chemical Stability: The product is chemically stable.

Hazardous Decomposition: Stable under normal conditions.

Hazardous reactions: Hazardous polymerization does not occur.

Disposal considerations

Waste should only be disposed of via a licensed waste contractor. The European Waste Catalogue (EWC) and European Waste List

(EWL) is a harmonized list of wastes. Waste materials should be classified prior to final disposal with EWC-codes. Wastes and empty containers should be treated based on their classification and properties referring to local and national waste management regulations. Waste management options: Dispose of to non-hazardous or hazardous waste landfill (Council Directive on the landfill of waste 99/31/EU and Council Decision establishing criteria and procedures for the acceptance of waste at landfills 2003/33/EU) or dispose of via hazardous waste incineration.

The generation of waste should be avoided or minimized wherever possible. Dispose of surplus and non-recyclable products via a licensed waste disposal contractor. Disposal of this product, solutions and any by-products should at all times comply with the requirements of environmental protection and waste legislation and any local waste management regulations.

Waste codes should be assigned by the user, preferably in discussion with the waste disposal authorities. All wastes containing residues of the substance or its hazardous degradation products shall be classified as hazardous waste.

All wastes containing residues of the substance or its hazardous degradation products should be disposed of as hazardous waste to authorized hazardous waste incineration plants, operated according to Directive 2008/98/EC on waste, Directive 2000/76/EC on the incineration of waste and Best Available Techniques for Waste Incineration as described in the respective BREF of August 2006.

Contaminated packaging: Contaminated packaging should be emptied as far as possible and disposed of as hazardous waste to

incineration plants in accordance with Directive 2000/76/EC. Clean packaging material should be subjected to waste management schemes (recovery, recycling, re-use) according to local waste management regulations.

The substance and its container must be disposed of in a safe way. Care should be taken when handling emptied containers that have not been cleaned or rinsed out. Empty containers or liners may retain some product residues. Avoid dispersal of spilt material and runoff and contact with soil, waterways, drains and sewers.