EU-IN_VITRO_MEDICAL_DEVICE_REG-ART_5_2_ANX_1

In Vitro Diagnostic Medical Devices Regulation - Hazardous Substances

EU. Hazardous Substances for Purposes of Art. 5(2) and Annex I of Regulation (EU) 2017/746 on In Vitro Diagnostic Medical Devices, 5 May 2017, as corrected 27 December 2019

This list contains a non-exhaustive inventory of hazardous substances for purposes of Regulation (EU) 2017/746, including Chap. 2 (Placing on the market and putting into service) and Annex I (General Safety and Performance Requirements). It is derived from: Table 3 of Annex VI to CLP, REACH Candidate List of SVHCs, and Directive 2000/54/EC's Annex III (Biological Agents list).

RELEVANT LEGISLATION
Back to the List

Creosote oil, high-boiling distillate; Wash Oil [The high-boiling distillation fraction obtained from the high temperature carbonization of bituminous coal which is further refined to remove excess crystalline salts. It consists primarily of creosote oil with some of the normal polynuclear aromatic salts, which are components of coal tar distillates, removed. It is crystal free at approximately 5 °C (41°F).]

The high-boiling distillation fraction obtained from the high temperature carbonization of bituminous coal which is further refined to remove excess crystalline salts. It consists primarily of creosote oil with some of the normal polynuclear aromatic salts, which are components of coal tar distillates, removed. It is crystal free at approximately 5°C (41°F). EC / List no: 274-565-9 CAS no: 70321-79-8
EU CLP (1272/2008)
Carc. 1B