EU-IMPLANTABLE_MEDICAL_DEVICES-ART_3_ANX_1
EU-IMPLANTABLE_MEDICAL_DEVICES-ART_3_ANX_1
Active Implantable Medical Devices Directive - Hazardous Substances
EU. Hazardous Substances for Purposes of Directive 90/385/EEC on Active Implantable Medical Devices, 20 July 1990, amended by Directive 2007/47/EC, 21 September 2007
This list contains hazardous substances for purposes of Directive 90/385/EEC on active implantable medical devices, particularly as regards Article 3 and Annex I (Essential Requirements). This non-exhaustive database is derived from: Table 3 of Annex VI to CLP, REACH Candidate List of SVHCs, and Directive 2000/54/EC's Annex III (Biological Agents list). Please note that Regulation (EU) 2017/745 on medical devices has repealed Directive 90/385/EEC and begun to apply from 26 May 2021. Nevertheless, Article 120 of the Regulation provides for a transitional period allowing medical devices, under specified conditions (e.g., placed on the market prior to 26 May 2021), to continue to comply with the Directive. In accordance with the fourth paragraph of Article 120, this period ends 26 May 2025.
Last updated 25 April 2024. Database contains 4753 unique substances/entries.
Filter the list
|
A complex combination of hydrocarbons obtained from liqnite carbonization tar by solvent crystallisation (solvent deoiling), by sweating or an adducting process. It consists predominantly of straight and branched chain saturated hydrocarbons having carbon numbers predominantly greater than C12.
|
295-454-1
|
92045-71-1
|
Carc. 1B |
||
|
A complex combination of hydrocarbons obtained when petrolatum is treated with Al2O3 to remove polar components and impurities. It consists predominantly of saturated, crystalline, and liquid hydrocarbons having carbon numbers predominantly greater than C25.
|
285-098-5
|
85029-74-9
|
Carc. 1B |
||
|
A complex combination of hydrocarbons obtained by the treatment of petroleum petrolatum with activated carbon for the removal of trace polar constituents and impurities. It consists predominantly of saturated hydrocarbons having carbon numbers predominantly greater than C20.
|
308-149-6
|
97862-97-0
|
Carc. 1B |
||
|
A complex combination of hydrocarbons obtained by treatment of petrolatum with bleaching earth for the removal of traces of polar constituents and impurities. It consists predominantly of hydrocarbons having carbon numbers predominantly in the range of greater than C25.
|
309-706-6
|
100684-33-1
|
Carc. 1B |
||
|
A complex combination of hydrocarbons obtained as a semi-solid from dewaxed paraffinic residual oil treated with hydrogen in the presence of a catalyst. It consists predominantly of saturated microcrystalline and liquid hydrocarbons having carbon numbers predominantly greater than C20.
|
295-459-9
|
92045-77-7
|
Carc. 1B |
||
|
A complex combination of organic compounds, predominantly high molecular weight carboxylic acids, obtained by the air oxidation of petrolatum.
|
265-206-7
|
64743-01-7
|
Carc. 1B |
||
|
A complex combination of hydrocarbons obtained by the treatment of petroleum petrolatum with silicic acid for the removal of trace polar constituents and impurities. It consists predominantly of saturated hydrocarbons having carbon numbers predominantly greater than C20.
|
308-150-1
|
97862-98-1
|
Carc. 1B |
||
|
A complex combination of hydrocarbons obtained as a semi-solid from dewaxing paraffinic residual oil. It consists predominantly of saturated crystalline and liquid hydrocarbons having carbon numbers predominantly greater than C25.
|
232-373-2
|
8009-03-8
|
Carc. 1B |
||
|
A complex combination of hydrocarbons. It consists predominantly of aliphatic, alicyclic and aromatic hydrocarbons. It may also contain small amounts of nitrogen, oxygen and sulfur compounds. This category encompasses light, medium, and heavy petroleums, as well as the oils extracted from tar sands. Hydrocarbonaceous materials requiring major chemical changes for their recovery or conversion to petroleum refinery feedstocks such as crude shale oils, upgraded shale oils and liquid coal fuels are not included in this definition.
|
232-298-5
|
8002-05-9
|
Carc. 1B |
||
|
Residue from the distillation of crude phenanthrene boiling in the approximate range of 340°C to 420°C (644°F to 788°F). It consists predominantly of phenanthrene, anthracene and carbazole.
|
310-169-5
|
122070-78-4
|
Carc. 1B |
||
|
The heat treated residue from the distillation of high temperature coal tar. A black solid with an approximate softening point from 80°C to 180°C (176°F to 356°F). Composed primarily of a complex mixture of three or more membered condensed ring aromatic hydrocarbons.
|
310-162-7
|
121575-60-8
|
Carc. 1B |
||
|
The residue obtained during the distillation of high boiling fractions from bituminous coal high temperature tar and/or pitch coke oil, with a softening point of 140° to 170°C (284°F to 392°F) according to DIN 52025. Composed primarily of tri- and polynuclear aromatic compounds which also contain heteroatoms.
|
302-650-3
|
94114-13-3
|
Carc. 1B |
||
|
A complex black solid obtained by the heat treatment of low temperature coal tar pitch. It has a softening point within the approximate range of 50°C to 140°C (122°F to 284°F). Composed primarily of a complex mixture of aromatic compounds.
|
292-653-5
|
90669-58-2
|
Carc. 1B |
||
|
The product obtained by air-blowing, at elevated temperature, low-temperature coal tar pitch. It has a softening-point within the approximate range of 70°C to 180°C (158°F to 356°F). Composed primarily of a complex mixture of hydrocarbons.
|
292-654-0
|
90669-59-3
|
Carc. 1B |
||
|
A complex black solid or semi-solid obtained from the distillation of a low temperature coal tar. It has a softening point within the approximate range of 40°C to 180°C (104°F to 356°F). Composed primarily of a complex mixture of hydrocarbons.
|
292-651-4
|
90669-57-1
|
Carc. 1B |
||
|
The residue from the distillation of a mixture of coal tar and aromatic petroleum streams. A solid with a softening point from 40°C to 180°C (104°F to 356°F). Composed primarily of a complex combination of three or more membered condensed ring aromatic hydrocarbons.
|
269-109-0
|
68187-57-5
|
Carc. 1B |
||
|
263-072-4
|
61789-60-4
|
Carc. 1B |
|||
|
show/hide
Aluminosilicate Refractory Ceramic Fibres
are fibres covered by index number 650-017-00-8 in Annex VI, part 3, table 3.1 of Regulation (EC) No 1272/2008 of the European Parliament and of the Council of 16 December 2008 on classification, labelling and packaging of substances and mixtures, and fulfil the three following conditions: a) oxides of aluminium and silicon are the main components present (in the fibres) within variable concentration ranges b) fibres have a length weighted geometric mean diameter less two standard geometric errors of 6 or less micrometres (µm) c) alkaline oxide and alkali earth oxide (Na2O+K2O+CaO+MgO+BaO) content less or equal to 18% by weight
EC / List no:
-
| CAS no:
-
Glass, oxide, chemicals
This category encompasses the various chemical substances manufactured in the production of inorganic glasses. For purposes of this category, 'glass' is defined as an amorfous, inorganic, transparent, translucent or opaque material traditionally formed by fusion of sources of silica with a flux, such as an alkali-metal carbonate, boron oxide, etc. and a stabilizer, into a mass which is cooled to a rigid condition without crystallization in the case of transparent or liquid-phase separated glass or with controlled crystallization in the case of glass-ceramics. The category consists of the various chemical substances, other than by-products or impurities, which are formed during the production of various glasses and concurrently incorporated into a glass mixture. All glasses contain one or more of these substances, but few, if any, contain all of them. The elements listed below are principally present as components of oxide systems but some may also be present as halides or chalcogenides, in multiple oxidation states, or in more complex compounds. Trace amounts of other oxides or chemical compounds may be present. Oxides of the first seven elements listed* comprise more than 95 percent, by weight, of the glass produced. @Aluminium*@Lead@Boron*@Lithium@Calcium*@Manganese@Magnesium*@Molybdenum@Potassium*@Neodymium@Silicon*@Nickel@Sodium*@Niobium@Antimony@Nitrogen@Arsenic@Phosphorus@Barium@Praseodymium@Bismuth@Rubidium@Cadmium@Selenium@Carbon@Silver@Cerium@Strontium@Cesium@Sulfur@Chromium@Tellurium@Cobalt@Tin@Copper@Titanium@Germanium@Tungsten@Gold@Uranium@Holmium@Vanadium@Iron@Zinc@Lanthanum@Zirconium
EC / List no:
266-046-0
| CAS no:
65997-17-3
Zirconia Aluminosilicate Refractory Ceramic Fibres
are fibres covered by index number 650-017-00-8 in Annex VI, part 3, table 3.1 of Regulation (EC) No 1272/2008 of the European Parliament and of the Council of 16 December 2008 on classification, labelling and packaging of substances and mixtures, and fulfil the three following conditions: a) oxides of aluminium, silicon and zirconium are the main components present (in the fibres) within variable concentration ranges b) fibres have a length weighted geometric mean diameter less two standard geometric errors of 6 or less micrometres (µm). c) alkaline oxide and alkali earth oxide (Na2O+K2O+CaO+MgO+BaO) content less or equal to 18% by weight
EC / List no:
-
| CAS no:
-
|
-
|
-
|
Carc. 1B |
||
|
A complex combination of hydrocarbons obtained by the treatment of solvent-dewaxed petroleum residual oils with activated charcoal for the removal of trace polar constituents and impurities.
|
309-710-8
|
100684-37-5
|
Carc. 1B |
||
|
294-843-3
|
91770-57-9
|
Carc. 1B |
|||
|
A complex combination of hydrocarbons obtained by treatment of solvent-dewaxed petroleum residual oils with bleaching earth for the removal of trace polar constituents and impurities.
|
309-711-3
|
100684-38-6
|
Carc. 1B |
||
|
A complex combination of hydrocarbons obtained by treatment of a residual oil with a natural or modified clay in either a contacting or percolation process to remove the trace amounts of polar compounds and impurities present. It consists of hydrocarbons having carbon numbers predominantly higher than C25 and boiling above approximately 400°C (752°F).
|
265-143-5
|
64742-41-2
|
Carc. 1B |
||
|
A complex combination of hydrocarbons produced by solvent removal of paraffins from the residue of the distillation of acid-treated, hydrocracked heavy paraffins and boiling approximately above 380°C (716°F).
|
295-499-7
|
92061-86-4
|
Carc. 1B |
||
|
292-656-1
|
90669-74-2
|
Carc. 1B |
|||
|
A complex combination of hydrocarbons obtained by treating a petroleum fraction with hydrogen in the presence of a catalyst. It consists of hydrocarbons having carbon numbers predominantly greater than C25 and boiling above approximately 400°C (752°F).
|
265-160-8
|
64742-57-0
|
Carc. 1B |
||
|
A complex combination of hydrocarbons obtained as the solvent soluble fraction from C3 - C4 solvent deasphalting of a residuum. It consists of hydrocarbons having carbon numbers predominantly higher than C25 and boiling above approximately 400°C (752°F).
|
265-096-0
|
64741-95-3
|
Carc. 1B |
||
|
A complex combination of hydrocarbons obtained by removal of long, branched chain hydrocarbons from a residual oil by solvent crystallization. It consists of hydrocarbons having carbon numbers predominantly greater than C25 and boiling above approximately 400°C (752°F).
|
265-166-0
|
64742-62-7
|
Carc. 1B |
||
|
A complex combination of hydrocarbons, sulfur compounds and metal-containing organic compounds obtained as the residue from refinery fractionation cracking processes. It produces a finished oil with a viscosity above 2cSt. at 100°C.
|
298-754-0
|
93821-66-0
|
Carc. 1B |
||
|
A complex combination of hydrocarbons obtained as the solvent insoluble fraction from solvent refining of a residuum using a polar organic solvent such as phenol or furfural. It consists of hydrocarbons having carbon numbers predominantly higher than C25 and boiling above approximately 400°C (752°F).
|
265-101-6
|
64742-01-4
|
Carc. 1B |
||
|
The residue from the fractional distillation of wash oil boiling in the approximate range of 270°C to 330°C (518°F to 626°F). It consists predominantly of dinuclear aromatic and heterocyclic hydrocarbons.
|
295-506-3
|
92061-93-3
|
Carc. 1B |
||
|
Residue from the fractional distillation of pitch distillate boiling in the range of approximately 400°C to 470°C (752°F to 846°F). Composed primarily of polynuclear aromatic hydrocarbons, and heterocyclic compounds.
|
295-507-9
|
92061-94-4
|
Carc. 1B |
||
|
A cohesive powder composed of coal mineral matter and undissolved coal remaining after extraction of coal by a liquid solvent.
|
302-681-2
|
94114-46-2
|
Carc. 1B |
||
|
A complex residuum from the atmospheric distillation of crude oil. It consists of hydrocarbons having carbon numbers predominantly greater than C20 and boiling above approximately 350°C (662°F). This stream is likely to contain 5 wt. % or more of 4- to 6-membered condensed ring aromatic hydrocarbons.
|
265-045-2
|
64741-45-3
|
Carc. 1B |
||
|
A complex residuum from atmospheric distillation of crude oil. It consists of hydrocarbons having carbon numbers predominantly greater than C11 and boiling above approximately 200°C (392°F). This stream is likely to contain 5 wt.% or more of 4- to 6-membered condensed ring aromatic hydrocarbons.
|
269-777-3
|
68333-22-2
|
Carc. 1B |
||
|
A complex combination of hydrocarbons produced as the residual fraction from the distillation of the products from a catalytic cracking process. It consists predominantly of hydrocarbons having carbon numbers predominantly greater than C11 and boiling above approximately 200°C (392°F).
|
295-511-0
|
92061-97-7
|
Carc. 1B |
||
|
A complex residuum from the distillation of catalytic reformer fractionator residue. It boils approximately above 399°C (750°F).
|
270-792-2
|
68478-13-7
|
Carc. 1B |
||
|
A complex combination of hydrocarbons produced as the residual fraction from distillation of the product from a catalytic reforming process. It consists of predominantly aromatic hydrocarbons having carbon numbers predominantly in the range of C10 through C25 and boiling in the range of approximately 160°C to 400°C (320°F to 725°F). This stream is likely to contain 5 wt. % or more of 4- or 6-membered condensed ring aromatic hydrocarbons.
|
265-069-3
|
64741-67-9
|
Carc. 1B |
||
|
A complex combination of hydrocarbons produced as the residual fraction from the distillation of heavy coker gas oil and light vacuum gas oil. It consists predominantly of hydrocarbons having carbon numbers predominantly greater than C13 and boiling above approximately 230°C(446°F).
|
270-983-0
|
68512-61-8
|
Carc. 1B |
||
|
A complex combination of hydrocarbons produced as the residual fraction from distillation of the products of a hydrocracking process. It consists of hydrocarbons having carbon numbers predominantly greater than C20 and boiling above approximately 350°C (662°F).
|
265-076-1
|
64741-75-9
|
Carc. 1B |
||
|
A complex combination of hydrocarbons obtained by treating an atmospheric tower residuum with hydrogen in the presence of a catalyst under conditions primarily to remove organic sulfur compounds. It consists of hydrocarbons having carbon numbers predominantly greater than C20 and boiling above approximately 350°C (662°F). This stream is likely to contain 5 wt. % or more of 4- to 6-membered condensed ring aromatic hydrocarbons.
|
265-181-2
|
64742-78-5
|
Carc. 1B |
||
|
A complex combination of hydrocarbons obtained as a residual fraction from the distillation of hydrotreated steam-cracked naphtha. It consists predominantly of hydrocarbons boiling in the range of approximately 200°C to 350°C (32°F to 662°F).
|
295-514-7
|
92062-00-5
|
Carc. 1B |
||
|
A complex combination of hydrocarbons obtained as residue from the distillation of steam cracked heat soaked naphtha and boiling in the range of approximately 150°C to 350°C (302°F to 662°F).
|
297-905-8
|
93763-85-0
|
Carc. 1B |
||
|
A complex residuum from the distillation of the products from a steam-cracking process. It consists predominantly of aromatic and unsaturated hydrocarbons having carbon numbers greater than C7 and boiling in the range of approximately 101°C to 555°C (214°F to 1030°F).
|
271-013-9
|
68513-69-9
|
Carc. 1B |
||
|
A complex combination of hydrocarbons obtained as a column bottom from the separation of effluents from steam cracking naphtha at a high temperature. It boils in the range of approximately 147°C to 300°C (297°F to 572°F) and produces a finished oil having a viscosity of 18cSt at 50°C.
|
295-517-3
|
92062-04-9
|
Carc. 1B |
||
|
A complex combination of hydrocarbons obtained during the production of refined petroleum tar by the distillation of steam cracked tar. It consists predominantly of aromatic and other hydrocarbons and organic sulfur compounds.
|
292-657-7
|
90669-75-3
|
Carc. 1B |
||
|
A complex residuum from the distillation of steam-cracked petroleum residues.
|
273-272-3
|
68955-36-2
|
Carc. 1B |
||
|
A complex combination of hydrocarbons obtained as the residual fraction from the distillation of the products of a steam cracking process (including steam cracking to produce ethylene). It consists predominantly of unsaturated hydrocarbons having carbon numbers predominantly greater than C14 and boiling above approximately 260°C (500°F). This stream is likely to contain 5 wt. % or more of 4- to 6-membered condensed ring aromatic hydrocarbons.
|
265-193-8
|
64742-90-1
|
Carc. 1B |
||
|
A complex combination of hydrocarbons produced as the residual fraction from distillation of the product from a thermal cracking process. It consists predominantly of unsaturated hydrocarbons having carbon numbers predominantly greater than C20 and boiling above approximately 350°C (662°F). This stream is likely to contain 5 wt. % or more of 4- to 6-membered condensed ring aromatic hydrocarbons.
|
265-081-9
|
64741-80-6
|
Carc. 1B |
||
|
A low-sulfur complex combination of hydrocarbons produced as the residual fraction from the topping plant distillation of crude oil. It is the residuum after the straight-run gasoline cut, kerosene cut and gas oil cut have been removed.
|
271-763-7
|
68607-30-7
|
Carc. 1B |
||
|
A complex residuum from the vacuum distillation of the residuum from atmospheric distillation of crude oil. It consists predominantly of hydrocarbons having carbon numbers predominantly greater than C24 and boiling above approximately 390°C (734°F).
|
292-658-2
|
90669-76-4
|
Carc. 1B |
||