Adopted opinions and previous consultations on applications for authorisation

Adopted opinions and previous consultations on applications for authorisation

Adopted opinions and previous consultations on applications for authorisation

This page provides further information on the applications for authorisation or review reports, which have undergone consultation. The applications for authorisation are in the opinion development phase until the final opinions of the Committees for Risk Assessment and Socio-economic Analysis have been adopted and sent to the European Commission. Its decision-making process can be followed through the comitology register, where further information is published about the REACH Committee's past and upcoming meetings.

On 1 February 2020, the United Kingdom (UK) withdrew from the EU. The transition period provided by the withdrawal agreement ended on 31 December 2020. As of 1 January 2021, an application for an authorisation submitted by a person established in the UK (except Northern Ireland) is no longer valid in the EU, unless that application has been transferred to a legal entity established in the EU or Northern Ireland before the end of the transition period. Therefore, authorisation applications and decisions in so far as these concern persons established in the UK (except Northern Ireland) are no longer considered valid. 

 

There are currently no ongoing consultations.
 
0095-03 Initial Chromium trioxide 215-607-8 1333-82-0 REGARTIS s.r.o. in its legal capacity as Only Representative of Joint Stock Company “Novotroitsk Plant of Chromium Compounds” [application transferred from: “REACHLaw” in its legal capacity as Only Representative of Joint Stock Company “Novotroitsk Plant of Chromium Compounds” due to a notified legal entity change] Functional chrome plating with decorative character Opinions adopted Details
0262-01 Initial Chromium trioxide 215-607-8 1333-82-0 Cromoplastica C.M.C. S.r.l. Use of chromium trioxide for etching of plastic substrates as a key pre-treatment step for creating an electrically conductive surface to enable electroplating Opinions adopted Details
0255-01 Initial Chromium trioxide 215-607-8 1333-82-0 Chrom - Mueller Metallveredelung GmbH Industrial use of chromium trioxide for high ratio aspects inside hard chromium coating of firearms barrel bores subject to thermal, mechanical and chemical stresses, in order to provide wear resistance properties, as well as low friction coefficient, hardness, resistance to corrosion and gas erosion properties. Opinions adopted Details
0316-01 Initial Chromium trioxide 215-607-8 1333-82-0 ASO Cromsteel S.A.; FDF S.r.l. Chromium trioxide based functional chrome plating of semi-finished steel products (bars, cylinder tubes and linear shafts) for the manufacture of hydraulic and pneumatic components Opinions adopted Details
0212-01 Initial Chromium trioxide 215-607-8 1333-82-0 LARS Chemie, spol. s r.o.
CASTELCROM SRL; MATRIDOS S.L.U; PLATING BRAP S.A.U.
Industrial use of chromium trioxide for the etching, pre-treatment step in the electroplating process of functional chrome plating with decorative character Opinions adopted Details
0253-01 Initial Chromium trioxide 215-607-8 1333-82-0 GEA Westfalia Separator Group GmbH Chromium trioxide-based functional chrome plating of machine components for centrifugal separator and decanter centrifuges Opinions adopted Details
0255-03 Initial Chromium trioxide 215-607-8 1333-82-0 Chrom - Mueller Metallveredelung GmbH Industrial use of chromium trioxide in the hard chromium coating of complex outer and inner surfaces of firearms auxiliary parts requiring a customised and selective coating technique and subject to thermal, mechanical and chemical stresses, in order to provide wear resistance and barrier properties, as well as post-processing capability and resistance to hot combustion gas erosion. Opinions adopted Details
0258-01 Initial Chromium trioxide 215-607-8 1333-82-0 Heinrich Schulte Söhne GmbH & Co. KG; Schulte Hartchrom GmbH Chromium trioxide-based functional chrome plating of large components and small components with complex geometries and/or requiring special approval procedures for their application in demanding sectors such as medical, aerospace, defence and mining industry Opinions adopted Details
0234-02 Initial Chromium trioxide 215-607-8 1333-82-0 Maschinenfabrik Kaspar Walter GmbH & Co KG Chromium trioxide-based functional chrome plating of cylinders used in the rotogravure printing and embossing industry. Opinions adopted Details
0241-01 Initial Chromium trioxide 215-607-8 1333-82-0 Gessi S.p.A.
San Marco Rubinetteria S.r.l.
Use of chromium trioxide for electroplating of metal substrates with the purpose of creating a long-lasting high durability surface with bright look for kitchen and bathroom sanitaryware (functional plating with decorative character) Opinions adopted Details